The Elite Loopback Harness adding an amplifier in minutes!
Вставка
- Опубліковано 24 лип 2024
- In this video we will go over the layout and function of our Elite Harness System. Specifically the Elite Loopback harness system and how it can be used to integrate amplifiers that take high level or low level signal.
Elite Harness System:
lljcustoms.com/collections/ll...
Contact us:
Email: Support@lljcustoms.com
Text: 602-320-7004
Https://LLJCustoms.com - Авто та транспорт
Recently got mine and the workmanship of the harness is outstanding!
@@davidcountryl1f3bullies60 about two weeks. They won’t build it until you order it
Man.. That looks great! I wish I had one!
Just ordered a harness for my 2019 Silverado. Never wired an amp before but this makes it look pretty simple. Wish me luck!
Hey Rob, Thank you that is what we hope to inspire in our customers. Its the tuning that gets you so make sure to do some research on what you are using and if you do have any questions please let us know. Good luck
@@lljcustomscaraudiofabricat7854
Bad business with you guys
I ordered my hardness & still haven’t received it
Text you guys don’t reply to my text or emails
I recently received my harness after waiting sometime. I would like to say aside from the wait time this is by far the best business to purchase any and all hand built custom wiring harness. Please be patient with the builder these things take time especially since they are made to order. Thank you guys my Silverado sounds amazing
Did you ever make a video on how to wire up a crossover to the loopback harness like you mentioned in this video? If not could you please make one?
Always remember put the store website link for potential customers to buy this wonderful product and service 😀
Say less, link added ! Thank you !
Have a friend's 2018 F150 Supercab, non amplified with 8" touch OEM head unit. He's interested in just adding subs in the rear for the time being. I was planning to buy a harness to run signal from behind the head unit to an LC7i, then from there to a sub amp. I wanted to use an LC7i and not the LC2i to keep his options open in case he takes my advice and replaces the 4 channel speakers and amps them too. But I'm running into a problem planning out getting signal to the LC7i and keeping the door speakers intact because without installing a 4 channel amp at the same time, then the door speakers lose their signal. Perhaps I should look into the Elite T Harness instead?
This is exactly what I need for my 2019 ram how much it would be for all 3 the T harness the loopback harness and the amp ?
Hey, I have a 2020 f150xlt with stock crap system. I want to do the D6-1200 and change the 4 door speakers and tweeters with jl audio c3-600. And possibly put the kicker hideaway sub behind the seat. what else would I need for that ? Thank you
I looked up the kit for my 2015 silverado 3500 with bose to add my own choice of amp and sub along with aftermarket door speakers but maybe I didn't look well enough because I didn't see it.
I’m trying to follow you but I’m having a hard time. Can I use that loop harness to install into a 4 channel amp? I think I need that box you had cuz for an amp I would need rca output. You should do an install video
Question: I have Bose system in my 2019 Terrain, AudioControl is what Im upgrading to. Active front stage, and componant rear stage, single 10in sub. I noticed that A/C has a Digital input. Is it possible to run a Digital loopback harness, since A/C makes it possible to use?
Have you found a harness for 2021 Mazda 6 Touring with Bose?
Gee, I wish you guys were in Florida.
Great video. Isn't the quality of the factory speakers usually an issue? Speaking as someone interested in your harness for a 2017 Hyundai Elantra.
Hello Akil, The factory speakers are a must change even if you don't add an amp we definitely suggest changing out the speakers. Even without an amp or aftermarket radio you will hear the difference. The Hyundai harness is currently out of stock.
@@lljcustomscaraudiofabricat7854 What speakers and amp do you suggest? I would like to run a quality sound system with a subwoofer. Also, when replacing the speakers do I have to make modifications or is it a straight fit?
So if I understand this correctly you don’t need any rca cables connected to the LC-4.800 if you aren’t connecting a subwoofer amp?
Correct amplifiers like that lc4.800 or link700.5 take in a high level signal and dont need a pre amp signal
I have a 2020 Silverado with Bose. I’m looking to install a 4 channel amp and subwoofer. Can you please tell me what I need to buy? I’ll make an install video. I just need to know what I need.
Hi Miguel! For your project we would recommend our Bose Loopback Harness with a 6 channel processor. This will offer you 4 channel RCAs to the doors and 2 for a sub, as well as a remote turn on for the amp. If you have any questions on the drop downs please send us a chat or email. lljcustoms.com/collections/chevy-gmc-cadillac/products/2014-2022-gm-gmc-buick-cadillac-with-bose-amplifier-t-harness
Need help with what I need for build?
So I have a 2022 nissan frontier s crew cab non fender system I am adding lc7 and lc4.800 lc 1.800 do you have one of these for that if so take my 💰 please
OK so 2016 ram 1500. Do I need the T harness and the loopback or just loop back. sorry for being dumb and thanks for any response .
Hi Sonny, no problem we are happy to help. When using the Loopback Harness the T-Harness is no longer needed since the loop also offers signal. This option however will also return the signal to the speakers using the factory wiring. You would use one or the other but not both at the same time. If you're amplifying the speakers, the T-Harness would provide signal but you need to run your own wiring to the speakers. With the Loopback Harness you can use the factory wiring.
I have a 2017 Cadillac CTS I want to put in a audiocontrol LC7i .. do you have any thing for that
For this year there are a few connector options. If you'd like to send over a message to our team at support@lljcustoms.com they can help you find the correct set your vehicle will require.
yes i would like to know if this harness needs the controller to mesh with an old school Eclipse EA1000 this will be firing all 4 of my K2 in the doors and Kappas in the dash
Hi Buddy, I was unable to pull up a manual for this amp. Do you happen to know the input voltage on it?
I think it’s 14.4 I’m at work I will check when get home and let you know if it’s different
@@wirenut495 If the vehicle does not have a factory amplified system the harness can be wired directly to the amp. In the non-amplified system the radio will output about 10v, if the input on the amp is at 14v you'll be fine. As far as connection we would need to see what your amp requires. If you can send us an email to support@lljcustoms.com with a picture of the input ports on the amp we can help you verify what ends you will need.
Do u have the loopback harness for 2020 gmc sierra denali? If yes where do I buy it?
Hello Oscar, Yes we do and you will have bose. Here is the link to our site : lljcustoms.com/collections/llj-customs-elite-harness-system-home
Don’t buy from them you going to wait months to get it bro
@@lljcustomscaraudiofabricat7854
I’m put you guys on blast on you tube
For scamming me
What is the yellow and black loose wire for
they are 12volt constant and ground to power an LOC or small dsp
Any harness for 23 trailblazer???
Don’t do business with them you’re going to get robbed
@@eliasleon495how so??
@@eliasleon495that’s if they ever respond to take your money
any black Friday deals?
Hi Anthony, we have a giveaway coming up but nothing for Black Friday this year. Unfortunately with the supply chain issues we are having, purposely selling out what we have available would not be ideal.
Discount code>?