I would LOVE to watch you or someone that knows what they're doing go through the actual tuning process. Tip and tricks to get the most out of my beloved but complicated and confusing dm-608
this is hands-down, the best amplifier on the market. I purchased it Because it has a built-lc7i For DSP, but I think the best feature is GTO technology which eliminates the need for me to tap into my fuse box to add a remote wire to my mono amp. I've been searching high and low for an answer on whether or Not this device supports remote output because it has GTO and this video answered all of my questions. Thank you for being around, buddy.
This is EXACTLY what I've been looking for to make a nice customized system for my Honda Goldwing F6B. I really want to retain all the functionality of the factory head unit - but hated the way the system sounds due to the bass being eliminated as the volume is increased. I also don't want to sacrifice a lot of real estate to utilize a line-level controller AND a power amp. This is the perfect solution for me! Heading over to Amazon to buy one of these puppies right now!!! Thank you!
Awesome! Sounds like the AccuBass tech will come in handy on your Goldwing. Let us know how you like it, and if you need any help setting it up, shoot us an email or give us a call! www.audiocontrol.com/contact/
Would this amplifier be too much for powering a set of focal ps 165 fue component speakers rated at 80rms? And a 10 inch focal p 25 fue subwoofer rated at 280rms? I see that the audio control would give me 125rms per channel at the speakers and a 400rms bridged connection to my subwoofer I don’t know if there is a way to adjust this amplifier to work with the rms that I need, this could be the perfect solution to installing my audio system to my fiesta st Sent from my iPad
I have this amp new in the box, just arrived from Crutchfield, Can you run the front channel in 2ohm and the rear channel in 4ohm at the same time? Can you run a Epicenter off the line level out if I use the line level output in channel summed to get a full range signal with all EQ and crossover in BYPASS mode??
which RTA microphone do you recommend for a project like this? Also, is it not necessary to run the rear high-level speakers into the amp for conversion? I have dashboard high-mids/highs, 6x9 front doors with components, and 6.5 with components in the rear doors. So is there no need to run my rears into the dsp?
Only reason to run rears into the DSP would be if you want to maintain the ability to fade sound from front to rear. As for an RTA microphone, we offer several depending on need and budget. Check them out here: www.audiocontrol.com/pro-audio/
can you guys PRETTY PLEASE make a 6 channel version of this in order to run the rear package tray speakers plus a set of components in the front? Or maybe point me in the right direction? Thank you for your time
I would LOVE to watch you or someone that knows what they're doing go through the actual tuning process. Tip and tricks to get the most out of my beloved but complicated and confusing dm-608
this is hands-down, the best amplifier on the market. I purchased it Because it has a built-lc7i For DSP, but I think the best feature is GTO technology which eliminates the need for me to tap into my fuse box to add a remote wire to my mono amp. I've been searching high and low for an answer on whether or Not this device supports remote output because it has GTO and this video answered all of my questions. Thank you for being around, buddy.
This is EXACTLY what I've been looking for to make a nice customized system for my Honda Goldwing F6B. I really want to retain all the functionality of the factory head unit - but hated the way the system sounds due to the bass being eliminated as the volume is increased. I also don't want to sacrifice a lot of real estate to utilize a line-level controller AND a power amp. This is the perfect solution for me! Heading over to Amazon to buy one of these puppies right now!!! Thank you!
Awesome! Sounds like the AccuBass tech will come in handy on your Goldwing. Let us know how you like it, and if you need any help setting it up, shoot us an email or give us a call! www.audiocontrol.com/contact/
YALL GOT MARK!!!!!! ❤️❤️❤️
Can I run front speakers with two channels and then run a sub(bridged) with the remaining two?
Yes you can
Just get a sub to match the power of bridged setup.
Would this amplifier be too much for powering a set of focal ps 165 fue component speakers rated at 80rms? And a 10 inch focal p 25 fue subwoofer rated at 280rms?
I see that the audio control would give me 125rms per channel at the speakers and a 400rms bridged connection to my subwoofer
I don’t know if there is a way to adjust this amplifier to work with the rms that I need, this could be the perfect solution to installing my audio system to my fiesta st
Sent from my iPad
I have this amp new in the box, just arrived from Crutchfield, Can you run the front channel in 2ohm and the rear channel in 4ohm at the same time? Can you run a Epicenter off the line level out if I use the line level output in channel summed to get a full range signal with all EQ and crossover in BYPASS mode??
So that means they will control to amplifier mono to for the subs?
I am installing this with a JL audio mono block for my sub. Would you use the Audio control sub control or a JL audio one
With this one, Do I need the LC2i PRO?
I have a question do I have to set flat on the DSP when i set gain first or do I have to set first crossovers and then the gain ???
Audiocontrol never answers their phone
which RTA microphone do you recommend for a project like this? Also, is it not necessary to run the rear high-level speakers into the amp for conversion? I have dashboard high-mids/highs, 6x9 front doors with components, and 6.5 with components in the rear doors. So is there no need to run my rears into the dsp?
Only reason to run rears into the DSP would be if you want to maintain the ability to fade sound from front to rear. As for an RTA microphone, we offer several depending on need and budget. Check them out here: www.audiocontrol.com/pro-audio/
Does anyone use this amp as a 6 channel and how would I wire it.
can you guys PRETTY PLEASE make a 6 channel version of this in order to run the rear package tray speakers plus a set of components in the front? Or maybe point me in the right direction? Thank you for your time
Done! www.audiocontrol.com/car-audio/power-amplifiers/d-61200/
I just bought a test and wonder how to use it because nobody in Mexico nows to set up gains with a laptop
I’d love to us to slink with this. Doesn’t seem like it’s an option.