Dude I freaken bought a add an amp adapter off amazon for 60 bucks and I was pissed when I popped off the radio to connect it just to find that it didnt match. Thank God I took a chill pill and looked at your video minutes after before running to my local audio shop and buying some cheapo line tap adapter lol
Hey man I like the setup for the CAT 5 ethernet cable you have there, that looks clean and it comes in handy. Could you demonstrate a video on how you installed that? I like that setup.
I need one of these to run my door speakers on an amp. I'm using a 5 channel, running the door speakers on the 4 channels and sub. I have a passive EQ to run in between the radio and amp, so the 2 channel out from the harness is good, just like the idea of not having to tap into the speaker and run extra wiring. This is on a 2017 Escape SE with the 8" screen, no factory sub.
This is why I stick with older vehicles at least you can still swap out many radios as you want. plus your emergency flasher switch is right on the steering wheel where it belongs.
The video title says it's compatible with the 2011-2019 trucks. I have a 2020 F150 with the 8" screen. Did the connections change on the 2020 Ford F-150?
Hi guys great video man this is way better than changing whole stereo. Hey can you plz provide me with the link to correct harness? Im looking to add amp for door speakers and amp for subs with an lc7i. Thanks man I'll buy that asap GREAT VIDEO!!
Fernando, did you end up adding the amp to the door speakers and a sub? I'm kind of on the same boat as you; I'm looking at adding a small prime 4 ch amp to my oem door speakers and a jl micro sub with the lc2i. All from my factory HU. If you ended up doing it, how is your sound quality?
Got a question... What if i am hooking up 2 amps to a factory radio. One for subs and one for mids and highs. What plug would i need to nake it a straight plug and play for a 2014 ford f150 xlt super crew
Hello Garrett, That would be a question for customer service. You can email or text then your order number and your question and they will help you out. 602-320-7004 or support@lljcustoms.com
my 19 superduty didnt have to do any of that, i removed all fords pieces and bought a harness that plugged into stock amp and i didnt have to run wires to all speakers or cut anything
I have a 2018 ford edge titanium with a factory sub in the rear. Trying to add another amplifier with a separate subwoofer, what do I need for one? And will I need to disconnect the factory sub and amp? Clueless on these new electrical systems! Tha ks
It worked on my 2019 F-150 with 8". But I don't have the bose or the sub. You can order the harness and the converter for your specific model that has either set up.
You can get yourself an Lc2i tab into your back left and back right speakers run the wire into the Lc2i and you just have to run a ground and power wire to the Lc2i if you have an amp you can just connect 12 gauge wire into the power and ground the great thing about the Lc2i is that it has a feature called GTO which is GREAT TURN ON and that means that you won’t need to run a remote wire to your radio because it will detect signal from your speaker wires that you connected and that will tell the Lc2i to turn on you can run a remote wire from your Lc2i to an amp or anything else and that will turn on your amp from the Lc2i once you installed the Lc2i you have two rcas outputs MAIN OUTPUT that’s for if you want to run an amp to power your car speakers and the second output is BASS OUTPUT and that’s for your subwoofer if you want to install one in
MY amp (Kicker Key 200.4) has four RCA plugs and you show two. Is that a difference of the 4 inch versus 8 inch variation? Do you offer a harness that supports four channels?
Hello Brian, The input of an amp is based on what that amp is designed to do. We do offer a verity of configurations for the harness including 2/4/6 channel
How much do you charger or much is it make another one of those plug and play. I have a 2014 extended cab f150 and been wanting the same set up your using to add a sub under my rear seats
Would this with my 2015 mustang with the 9 speaker amplified system? I tried using the amplifier speaker outputs as high inputs for the amp but I get no sound and believe I maybe fried the factory amp so I wanna run it directly from the head unit.
How would I order that one it ask me for sl or something like that and that I don't know. yeah my bad I didn't see the mess in the bottom about steering wheel.thank you
That's is correct. The loc in this care it will be a link2 since we do t use the LP7-2 anymore. The unit will look for voltage from the factory radio and turn on automatically
@@DJCuhhhstin956 yes I'm familiar with equalizers..,... I was born in the 70s I've installed enough car audio to make your head spin. I was looking in to maestro but they are not ready yet for a complete system. When I install anything it's done right. Yes I've seen amps that can help tune sound. But it's not the same as ford head unit still cuts off certain frequencies.
I try to order but have no idea what I’m looking for - so I want 2 apps if I need one for the door speakers and one for subs . What plug do I need . F250 2019
Just installed my sub with a harness I bought from you guys. The problem is that the subs are wired to my front two channels. When I fade to back speakers there is nothing. When I fade to front, sub works.. ?????
Hello, the front channel is has the lowest bass frequency in the vehicle. You will need to set your fade and balance befor you set your loc and amp gain for the sub channel
I want to know what this exact part is called or how to get it because when I click the link it shows me an image of a different harness. Please thank you
Hi Lorenzo, the harness is built to order based on the options you select. If you need help on the options send us an email with your vehicle and project information. We can walk you through the ordering process.
No absolutely not lets see what is the hold up. We have been staying at a weeks lead time orders up to the 20th of tbis months are currently in shipping unless its a KIT.
I have a 2017 ford f150 with sony amp. I just want to add subs and an amp do i need just this? And does the ecoboost make a fake engine sound? How can i turn it off thanks
Hello Carlos. If you just doing subs the a T-harness will do if you plan to do the doors and dash then the LoopBack harness would be what you want. please reach out to us and we will help you out with any questions you may have.
I have a 2013 F150 XLT with ford Sync. I'm wanting to add a basic subs/amp system and some new door speakers in the near future. Is this all I'll need in order to do so? Answers and any extra info is appreciated. Electronics aren't really my strong suit lol. Thanks in advance!
Hello Anthony, Great question! the simple answer is no. This harness is a t-harness for adding a sub amp only. If your looking to add a Full system you can buy this harness with an LC7i that will give you the correct frequency's that you will need or a loop harness with the lc7i this will let you use factory wiring.
@@lljcustomscaraudiofabricat7854 you just said this harness will allow me to add a sub and amp..... ? Then said it wouldn't... Lol. Sorry I'm confused. I'm not gonna run an amp for door speakers just replace factory and call it good and just want to add a sub and amp for some bass obviously.
@@SilentBobber91 lol sorry for the complex answer. so this exact harness in the video is for adding a mono amp (sub only amp). if you want to add a 4 channel and a sub amp you need this harness ( a T-harness) but with an lc7i not an lp7-2.
You guys ever come out with the setup add a sub system to the premium sound that already has one? I got a 2013 fx4 f150 with the sony premium sub but its weak. I want to throw my two 12s in it that I had in my 2011. Just cant seem to find how to do it with the premium headunit.
I asked a question on your website but still no reply.... your tittle on the website says 2011-2020 ford f150 ... but your description on says 2015-2020 f150 .. so which one is it ???? Is it a typo or what?? Need to know asap !! Hopefully someone can reply here since I received no reply on the website .... !!!!!!!!!!!!!!!!
Hello, thank you for the questions! i do apologize if we missed you on the chat i am sure a tech will reach out via email. I am looking for the item but i don't see anything 2015-2020. if you car on the compatibility list says 2015 to 2019. i can verify what connector you need. ford changed from the tan with red connectors from 2011 the the 22 pin that is in the video but from 2019 to 2020 and up they have a new 32 pin connector so if you know what connector you have or send your vehicles information and we will help you out.
@@camposdavid0000 could you send over the vin on anything before 2013 we check it to make sure. please send that via text 602-320-7004 or email support@lljcustoms.com. Thank you
@@lljcustomscaraudiofabricat7854 hey if I did this to my 2016 f150 xlt, will this give me a comparable sound like a after market radio for my doors and subs? I'm putting in 2 12's under the back seat with a 600 watt amp.
@@lljcustomscaraudiofabricat7854 I was looking at adding the Rockford P300-10T in my 2015 XLT (non Sony, non simplified). Your video has made it look almost too easy, my brain is making me feel like I'm missing something lol
The larger engine 250 and 350 9 out of 10 come with a Sony or B&O system . This harness is for NONE amplified systems. If you have a sony or b&O you would use a ford factory amp harness
@@lljcustomscaraudiofabricat7854 I have a 2019 f250, but it's a work truck, a bare minimum work truck, came with no bed originally. It's got the 4" SYNC 1 and I'm fairly certain it's not Sony or whatever B&O is. I'd like this product, just wanna make sure it'd work for me.
Hello,I have a 2015 Lincoln navigator L,I have been on your website for (2)days,now trying to figure out how to get a loopback Harness for my truck!the website is sending me a harness for GM,GMC,etc.i have sent me email &phone #.My truck only has the factory amplifier &sync thx,Can you please assist me with abtaining a loopback Harness for my 2015 Lincoln navigator L.
Hi Henry, yes we do. We offer both our Elite T-Harness and Elite Loopback Harness. If you have any questions for your set up send us an email to support@lljcustoms.com. Ford Harness: lljcustoms.com/products/2018-2023-select-ford-elite-harness
Thank you for the response I'm looking to add a sub and one amp and I don't really want to splice in to the wires I just got on the your web that the difference on both harnesses??
@@81recinos for subs we recommend the T-harness with an LOC unit for a full plug and play set up. You can use your own or the harness can be ordered with one. You can go with something like a Link2 or LinkDQ. This way you'll have RCA output, remote turn on and distortion detection. The Loopback Harness is mainly for a full system or multiple amps. This will allow you to use the factory wiring when amplifying to the doors.
@@therealcboy._1412 yes sir we add the LOC units here in house to your liking . on the website you can build your own harness. lljcustoms.com/store?olsPage=products%2F2014-2018-gmc-chevy-oem-t-harness-for-8-screen-not-bose
2014 was a transition year for these vehicles, it can have the connector on our Ford harness or a different gray connector that we can get a hold of to make a custom harness. If you can send us a picture of the connector behind the radio module to our email at support@lljcustoms.com we can verify which one you need.
@@lljcustomscaraudiofabricat7854 thank you for the response! I check you your website , and only saw for 2018 Ford and up , I have a 2013 . Can you send me the link
Ok 2 things ok will this work on my 2019 that doesn’t have the CD player and also how would I go about installing a LC7I can I get this with the wiring already set up ?
StabbinWagon402 you have to get the Amp pro. It’s made by pac. Just search pac online and you will find it. If you’re looking for it for a 2019 it will cost you at least $200.
Hi thank you for the reply. However I ended up using the FOR-11ck plug and play harness with an alpine KTP-445u on my 2019 F-150 no cd player and everything works perfectly I added an LC2i to the front channel before the 4 channel amp to have nice clean bass to my subwoofers and I must say it now gets loud and sounds much better and actually gets loud enough my subs don’t drown the highs out anymore hands down worth every penny.
Dude I freaken bought a add an amp adapter off amazon for 60 bucks and I was pissed when I popped off the radio to connect it just to find that it didnt match. Thank God I took a chill pill and looked at your video minutes after before running to my local audio shop and buying some cheapo line tap adapter lol
Hey man I like the setup for the CAT 5 ethernet cable you have there, that looks clean and it comes in handy. Could you demonstrate a video on how you installed that? I like that setup.
Very nice harness man
I need one of these to run my door speakers on an amp. I'm using a 5 channel, running the door speakers on the 4 channels and sub. I have a passive EQ to run in between the radio and amp, so the 2 channel out from the harness is good, just like the idea of not having to tap into the speaker and run extra wiring. This is on a 2017 Escape SE with the 8" screen, no factory sub.
This is why I stick with older vehicles at least you can still swap out many radios as you want. plus your emergency flasher switch is right on the steering wheel where it belongs.
I've never seen a vehicle with emergency flashers on the steering wheel. Maybe my cars are older than yours lol
Have you gotten a harness for the premium sound system? Mainly 2018 Ford Edge sport, Sony!
The full time I’m trying to find one for my 2015 Taurus ban here it is, where you been happy I found it!
Awesome as always mr luiz
What is the link to this exact harness you used? Thank you!
The video title says it's compatible with the 2011-2019 trucks. I have a 2020 F150 with the 8" screen. Did the connections change on the 2020 Ford F-150?
I'm here for the same reason...want to add amp and speakers.
Bushman Canuck same here
Did you guys find a harness for the 2020? I got the STX with 8" screen.
Bro that's fuckin sick!!! Now I actually feel confident installing my own amp
Then we are doing our job even if you dont buy from us let us know if you have any questions.
Hi guys great video man this is way better than changing whole stereo. Hey can you plz provide me with the link to correct harness? Im looking to add amp for door speakers and amp for subs with an lc7i. Thanks man I'll buy that asap GREAT VIDEO!!
Fernando, did you end up adding the amp to the door speakers and a sub? I'm kind of on the same boat as you; I'm looking at adding a small prime 4 ch amp to my oem door speakers and a jl micro sub with the lc2i. All from my factory HU. If you ended up doing it, how is your sound quality?
Could you please give me the link to this please I can’t find the same one you used In the video
t-harness.com/products/2011-2020-ford-vehicle-select-models-none-amplified-hot-n-ready
Got a question... What if i am hooking up 2 amps to a factory radio. One for subs and one for mids and highs. What plug would i need to nake it a straight plug and play for a 2014 ford f150 xlt super crew
Hi i ordered one of these harnesses and i was wondering if it should be here today or tomorrow if i ordeded it a week ago?
Hello Garrett, That would be a question for customer service. You can email or text then your order number and your question and they will help you out. 602-320-7004 or support@lljcustoms.com
@@lljcustomscaraudiofabricat7854 ok thanks
@@lljcustomscaraudiofabricat7854 do you have store here in Phoenix?
my 19 superduty didnt have to do any of that, i removed all fords pieces and bought a harness that plugged into stock amp and i didnt have to run wires to all speakers or cut anything
That would be the loopback system
I have a 2018 ford edge titanium with a factory sub in the rear. Trying to add another amplifier with a separate subwoofer, what do I need for one? And will I need to disconnect the factory sub and amp? Clueless on these new electrical systems!
Tha ks
I have a 2011 f150 with factory 8 inch w/ Sony system do you make a t harness to add an additional amp?
Looking to see if this will work on a 2013 F-150 stx
Following also.
This is awesome, but just to make sure the steering wheel functions will still work correct?
yes that is correct
What’s the name of this harness so that I could order it on your site
Will this work with F150 with 8" screen with Navigation and Siriux/XM?
It worked on my 2019 F-150 with 8". But I don't have the bose or the sub. You can order the harness and the converter for your specific model that has either set up.
You can’t just cut the rear speaker wire and wire in a line out converter?
You can get yourself an Lc2i tab into your back left and back right speakers run the wire into the Lc2i and you just have to run a ground and power wire to the Lc2i if you have an amp you can just connect 12 gauge wire into the power and ground the great thing about the Lc2i is that it has a feature called GTO which is GREAT TURN ON and that means that you won’t need to run a remote wire to your radio because it will detect signal from your speaker wires that you connected and that will tell the Lc2i to turn on you can run a remote wire from your Lc2i to an amp or anything else and that will turn on your amp from the Lc2i once you installed the Lc2i you have two rcas outputs MAIN OUTPUT that’s for if you want to run an amp to power your car speakers and the second output is BASS OUTPUT and that’s for your subwoofer if you want to install one in
I have a 2015 ford f150 xlt, i just want to add an amp and subs to my factory radio. Is this hardness all i need to do so?
I want to do the same
Did you ever do it
I have a 2014 f150 Lariat with 8 in. Touch screen. No factory amp installed. Will this work for me?
MY amp (Kicker Key 200.4) has four RCA plugs and you show two. Is that a difference of the 4 inch versus 8 inch variation? Do you offer a harness that supports four channels?
Hello Brian, The input of an amp is based on what that amp is designed to do. We do offer a verity of configurations for the harness including 2/4/6 channel
Can you help in running under second seat and out of way. I have skar amp for now. Do I need to ground it to the battery or can I just use seat bolts?
Will this work with the new style Ranger?
Plugnplaykits has everything you need
How much do you charger or much is it make another one of those plug and play. I have a 2014 extended cab f150 and been wanting the same set up your using to add a sub under my rear seats
Did you find out if this works. I have a 2011 f150 and want subs too and I need an adapter is this it?
Would this with my 2015 mustang with the 9 speaker amplified system? I tried using the amplifier speaker outputs as high inputs for the amp but I get no sound and believe I maybe fried the factory amp so I wanna run it directly from the head unit.
Any luck with the premium navigation set up
No issues at all.
Backordered. Any time frame?
They are expected to be back by mid July
I ordered one lets hope it works
Hello Garrett, is there a reason why it wouldn't?
@@lljcustomscaraudiofabricat7854 i wouldnt thinks so. But you never know
@@garrettthomas8181 well if you do have any issues your covered by our 5 year warranty
@@lljcustomscaraudiofabricat7854 ok good deal
If i orded this 1 day ago when do you think i would receive it?
Is that applicable for adding a powered sub to a 2011 f150 lariat?
How would I order that one it ask me for sl or something like that and that I don't know. yeah my bad I didn't see the mess in the bottom about steering wheel.thank you
Is this what I need for a '17 F150 XLT with 302A group? I have the larger 8" screen but non Sony, non amplified
So I don't need a remote turn on wire then if I use this?
That's is correct. The loc in this care it will be a link2 since we do t use the LP7-2 anymore. The unit will look for voltage from the factory radio and turn on automatically
How do I get all bass frequencies? As ford cuts off certain bass frequencies especially turning volume up. (Sync 3)
I believe youre looking for whats know as an Equalizer
@@DJCuhhhstin956 yes I'm familiar with equalizers..,... I was born in the 70s I've installed enough car audio to make your head spin. I was looking in to maestro but they are not ready yet for a complete system. When I install anything it's done right. Yes I've seen amps that can help tune sound. But it's not the same as ford head unit still cuts off certain frequencies.
You need Forscan and there are different selections in forscan for EQ settings
I have f550 2017 I see ur web page but I don’t know Which wire harness do I need
What color is the remote turn on wire I’m not using the harness just tapping into factory wires
Will the controls on the steering wheel still work with the harness bro
Yes ! You will not lose any functions
I try to order but have no idea what I’m looking for - so I want 2 apps if I need one for the door speakers and one for subs . What plug do I need . F250 2019
Just installed my sub with a harness I bought from you guys. The problem is that the subs are wired to my front two channels. When I fade to back speakers there is nothing. When I fade to front, sub works.. ?????
Hello, the front channel is has the lowest bass frequency in the vehicle. You will need to set your fade and balance befor you set your loc and amp gain for the sub channel
I want to know what this exact part is called or how to get it because when I click the link it shows me an image of a different harness. Please thank you
Hi Lorenzo, the harness is built to order based on the options you select. If you need help on the options send us an email with your vehicle and project information. We can walk you through the ordering process.
Should i re-order it?
No absolutely not lets see what is the hold up. We have been staying at a weeks lead time orders up to the 20th of tbis months are currently in shipping unless its a KIT.
Did you produce the one for the premium audio ?
I need one also
I have a 2017 ford f150 with sony amp. I just want to add subs and an amp do i need just this? And does the ecoboost make a fake engine sound? How can i turn it off thanks
Do u guys have one for 2020 ford ranger??
I got a Ford F-150 2015 which hardness is for my truck??? I want to put a amp and some speakers
Hello Carlos. If you just doing subs the a T-harness will do if you plan to do the doors and dash then the LoopBack harness would be what you want. please reach out to us and we will help you out with any questions you may have.
What type of harness I need for 2011 f150 3.5 ecoboost
I have a 2013 F150 XLT with ford Sync. I'm wanting to add a basic subs/amp system and some new door speakers in the near future. Is this all I'll need in order to do so? Answers and any extra info is appreciated. Electronics aren't really my strong suit lol. Thanks in advance!
Hello Anthony, Great question! the simple answer is no. This harness is a t-harness for adding a sub amp only. If your looking to add a Full system you can buy this harness with an LC7i that will give you the correct frequency's that you will need or a loop harness with the lc7i this will let you use factory wiring.
@@lljcustomscaraudiofabricat7854 you just said this harness will allow me to add a sub and amp..... ? Then said it wouldn't... Lol. Sorry I'm confused. I'm not gonna run an amp for door speakers just replace factory and call it good and just want to add a sub and amp for some bass obviously.
@@SilentBobber91 lol sorry for the complex answer. so this exact harness in the video is for adding a mono amp (sub only amp). if you want to add a 4 channel and a sub amp you need this harness ( a T-harness) but with an lc7i not an lp7-2.
@@lljcustomscaraudiofabricat7854 okay so then to be clear, just to run a sub and amp this is all I will need.. thanks! Lol
Which harness is this?
You guys ever come out with the setup add a sub system to the premium sound that already has one? I got a 2013 fx4 f150 with the sony premium sub but its weak. I want to throw my two 12s in it that I had in my 2011. Just cant seem to find how to do it with the premium headunit.
Hello! We do have an option for the Sony AMP however the connectors have been unavailable for a few months now. We are working to get them back soon.
@@lljcustomscaraudiofabricat7854 okay thank you
How do I make my radio sync 2 8" add carplay
How much is 1 that you have in the video I need to buy it
Do you have one for the 2016 f150 with factory amp yet?
did you find one
lljcustoms.com/store/ols/products/2008-2018-select-chrysler-slash-dodge-slash-ram-slash-jeep-factory-amp-harness
I want a loop harness for f250 I don’t want to add door speaker wire I want the door speakers to be powered by the amp
Does this work with a 2014 Ford Fusion with the 8 inch sync display
Yes
do you have a harness for 2010 Expedition? I see them for 2011 but idk if it'll cross over.
Did anyone ever reply to you?
Where would you connect the remote out wire ????
To the amp remote in.. or Loc if it needs it or to both the remote is good up to 7 amps.
Where can i buy it ? I have a 2012 ford F-150.
Which one I need for a F550 truck
this one will work unless you have the sony
I asked a question on your website but still no reply.... your tittle on the website says 2011-2020 ford f150 ... but your description on says 2015-2020 f150 .. so which one is it ???? Is it a typo or what?? Need to know asap !! Hopefully someone can reply here since I received no reply on the website .... !!!!!!!!!!!!!!!!
Hello, thank you for the questions! i do apologize if we missed you on the chat i am sure a tech will reach out via email. I am looking for the item but i don't see anything 2015-2020. if you car on the compatibility list says 2015 to 2019. i can verify what connector you need. ford changed from the tan with red connectors from 2011 the the 22 pin that is in the video but from 2019 to 2020 and up they have a new 32 pin connector so if you know what connector you have or send your vehicles information and we will help you out.
@@lljcustomscaraudiofabricat7854 I have a 2012 extended cab f150 with ford sync
@@camposdavid0000 could you send over the vin on anything before 2013 we check it to make sure. please send that via text 602-320-7004 or email support@lljcustoms.com. Thank you
@@lljcustomscaraudiofabricat7854 just did thanks for the help
@@camposdavid0000 Thank you we will get back to you asap .
Where can I get this harness
This is available in our Ready 2 Go T-harness:
lljcustoms.com/products/2011-2020-ford-vehicle-select-models-none-amplified-hot-n-ready
It’s not clear what to order . It says lp7-2 or lp7-2R
Will this work with the Ford sync system
Yes sir it will
2010 f250 with sync ? And comes with sub in the back sit can it work with your hardness
@@lljcustomscaraudiofabricat7854 hey if I did this to my 2016 f150 xlt, will this give me a comparable sound like a after market radio for my doors and subs? I'm putting in 2 12's under the back seat with a 600 watt amp.
Does this work with a powered sub
Hello Willie, Yes our harnesses are sold by them self's for units that take a high level in like powered sub kits
@@lljcustomscaraudiofabricat7854 I was looking at adding the Rockford P300-10T in my 2015 XLT (non Sony, non simplified). Your video has made it look almost too easy, my brain is making me feel like I'm missing something lol
If I wanted to just power the rear speakers thru an amp, will these work? Have the same radio as in the video. Thanks
I have same question
How can I get that harness
Hello Rebel, here is the link to this harness: lljcustoms.com/collections/ford/products/2011-2020-ford-vehicle-t-harness-select-models
Do you have one for a 2015 f250
What's different about the 2019 F250 that makes this incompatible?
The larger engine 250 and 350 9 out of 10 come with a Sony or B&O system . This harness is for NONE amplified systems. If you have a sony or b&O you would use a ford factory amp harness
@@lljcustomscaraudiofabricat7854 I have a 2019 f250, but it's a work truck, a bare minimum work truck, came with no bed originally. It's got the 4" SYNC 1 and I'm fairly certain it's not Sony or whatever B&O is. I'd like this product, just wanna make sure it'd work for me.
@@vincentking8267 this is actually the exact same truck is a f250 with a utility bed. This harness will work for your vehicle.
Need 2012 f150 fx4
Hello,I have a 2015 Lincoln navigator L,I have been on your website for (2)days,now trying to figure out how to get a loopback Harness for my truck!the website is sending me a harness for GM,GMC,etc.i have sent me email &phone #.My truck only has the factory amplifier &sync thx,Can you please assist me with abtaining a loopback Harness for my 2015 Lincoln navigator L.
Do you anything for a 2021 f150 ?
Hi Henry, yes we do. We offer both our Elite T-Harness and Elite Loopback Harness. If you have any questions for your set up send us an email to support@lljcustoms.com. Ford Harness: lljcustoms.com/products/2018-2023-select-ford-elite-harness
Thank you for the response I'm looking to add a sub and one amp and I don't really want to splice in to the wires I just got on the your web that the difference on both harnesses??
@@81recinos for subs we recommend the T-harness with an LOC unit for a full plug and play set up. You can use your own or the harness can be ordered with one. You can go with something like a Link2 or LinkDQ. This way you'll have RCA output, remote turn on and distortion detection.
The Loopback Harness is mainly for a full system or multiple amps. This will allow you to use the factory wiring when amplifying to the doors.
“Front left. And uhh left front”
Where can get the extra harness at
And did you add the converter to it your self
@@therealcboy._1412 yes sir we add the LOC units here in house to your liking . on the website you can build your own harness. lljcustoms.com/store?olsPage=products%2F2014-2018-gmc-chevy-oem-t-harness-for-8-screen-not-bose
i have a 2019 f150 and it doesnt have a cd player?
Same can’t find any more info have u ?
Email me with questions chicofordmd13@gmail.com if you havent already figured out lol
What about 2019+ model f150s without the CD player? Is it still compatible?
Hello, some are you would need to remove the screen and check for the plug. Some trucks have the Sony or B&O system and some have a factory amp
LLJ Customs Car Audio Fabrication L.L.C ok what about a 2019 xlt w 8” sync 3 without amplifier?
@@WackoFromWaco96
Same thing I have
@@charleshenson4183 Me3 Bout to be putting in Infinity 90CSX's at 150watts : )
Why is there not a harness for 2014 f150 with 4" screen without factory amplifier? I hate this sync crap.
2014 was a transition year for these vehicles, it can have the connector on our Ford harness or a different gray connector that we can get a hold of to make a custom harness. If you can send us a picture of the connector behind the radio module to our email at support@lljcustoms.com we can verify which one you need.
works for a f150 2014 lariat?
yes it does
I need a harness for my 2011 fusion would this one work????
Look up carav they have a t to add an am or regular to switch out whatever
Need a hardness to add a 4ch amp!
Hello, we would suggest our oem loopback harness. This will let you add the 4 channel amp and use the factory wires .
@@lljcustomscaraudiofabricat7854 thank you for the response! I check you your website , and only saw for 2018 Ford and up , I have a 2013 . Can you send me the link
So still nothing for one with amp oh well
What do you do with the remote turn on wire?
What do you mean ?
Will this work for my 2013 F150 with the small square screen?
Most definitely the radio receiver will be in the same location
@@lljcustomscaraudiofabricat7854 thank you! The fitment list didn’t show my year truck thats why i asked.
Ok 2 things ok will this work on my 2019 that doesn’t have the CD player and also how would I go about installing a LC7I can I get this with the wiring already set up ?
Ryan Chapman I have the same truck and I want to know the same thing ? Anyone know if the 2019 no CD player uses the same harness like the FOR-11CK ?
I literally can’t find anything myself
StabbinWagon402 you have to get the Amp pro. It’s made by pac. Just search pac online and you will find it. If you’re looking for it for a 2019 it will cost you at least $200.
Hi thank you for the reply. However I ended up using the FOR-11ck plug and play harness with an alpine KTP-445u on my 2019 F-150 no cd player and everything works perfectly I added an LC2i to the front channel before the 4 channel amp to have nice clean bass to my subwoofers and I must say it now gets loud and sounds much better and actually gets loud enough my subs don’t drown the highs out anymore hands down worth every penny.
What harness do I need for a 2013 for f150 limited
I’m wondering the same thing. I’ve got the stupid sync radio that has little to no aftermarket support
Will this work for 2014 Ford Explorer with the my ford touch system?
Will this work with ford fusion 2013?