pac audio smart radio replacement adapters
Вставка
- Опубліковано 20 вер 2014
- So you want a new radio for your ride and you are thinking you're going to give installing it a try. Or you walk into a car audio store and buy a radio and have it installed with out asking what it may do to your car's computer. That's right, your car has a computer and if you are not careful you can really mess it up. This week the guys take about radio replacement adapters. Thanks and share
- Авто та транспорт
Thank u so much man. My 2010 Ford Fusion need that part so my radio can work. So helpful guys.🙏🏾🙏🏾
Can you guys make a video of a gm utilizing a pac rp5gm11 to android stereo wiring?
Hey hey great exit stage maneuver!
I have a 2005 jeep grand cherokee limited with navigation and factory amplifier. I have a kicker zx1500.1 on 2 10in american bass xfl dvc ran to 2 ohm with all 0 gauge wireing and a kinetic 1400 in the back. It was hooked to factory radio had no issues for a year. Changed the factory put for a kenwood ddx719 and used a pac c2r-chy4 interface for wireing. Radio and gauges kept going in and out when I hit hard. Thought it was the radio so I changed it out for a kenwood ddx793 excelon. Same issue. So I figured it was the interface changed it out for the same one. Problem still there. Then I took the radio ignition wire off the interface and connected to my acc out let. Now I can hit hard as I want radio stays on and plays but my dash is going crazy. Pulled out the radio harness is going on and off and gauges are insink with the interface going on and off. Unplug the interface gauges go back to normal. Can anyone help me with this issue
Need some help have 06 Chevy Tahoe and I'm trying to find the correct part I was told that it is a rp5 gm31 but I got to the web site and it gives me os 2x. Can anyone help me with which one I should buy
I learn the hard way but this was very helpful for the" do it your self " people but it's just another way the motor company taking or money
+maxx T 👍
I need help a little bit I have a Pontiac G6 it's an 05 base. I am trying to figure out what harness I will need to use because it has the monsoon radio with out OnStar. Thank you in advance
Have you used this on a advent ogm1 i having no key or light chime now
Hi, I'm trying to put a factory Nav in a 2009 Cadillac DTS. Got the Nav unit took out the old head unit and got one of these harnesses. I have yet to install it but before I did I took it to Cadillac to have them try to take the theft lock off the head unit (head unit was used). When they ran diagnostics they couldn't find the head unit. Do you think once this is installed they will be able to find it? I really want this nav unit to work because I travel constantly for work and I hate onstar. Thanks guys!
I am trying to install a new deck in my 02 infiniti g20 and the factory had 3 harness hookups bought a generic harness no power to new stereo. When I hook up old stereo it would only work when I hook up the third harness. The third harness is for the cd changer will a pac audio harness work with new stereo
What wire kit do I need for a 2004 dodge ram with a infinity audio and volume control steering wheel. I want to hook up a basic pioneer deck and amp with a sub. I've so many now lol
sure wish I were in Clearwater !! I have an O5 Chevy trailblazer and I bought the RP5gm11 and nothing works, no sound, and my door locks dont work...I soldered everything right but cant figure it. Thanks GM.
So if I get the OS-5 I can keep my xm radio with an xm ready receiver?
2008 torrent steering wheel control, onstar, factory sub, which one do I need
I have been dealing with a problem myself. audio shop I think put some cheap harness in my 09 traverse that is fully loaded. Been dealing with them back and forth for a month. I told them that they need to put a PAC or Idatalink in the car.
Desperate help for 2020 Chrysler 300 touring. No premium radio. Will this amplify my car stereo speakers to make them louder?
I need help, your videos are funny and very professional at the same time. I have a dodge grand caravan 2008 that I installed a pioneer avh1300nex but I need help in getting the right smart harness. I got the pac swi-rc for steering wheel control but not working. I suspect that the cheap harness I currently use is not supplying the right power. Kindly recommend the right smart harness. thank you.
I have a 04 Nissan Armada installed a touchscreen receiver but kept the factory Bose speaker and factory amplified but the problem is I’m not getting any sounds. What do you recommend to fix this???
What are the RCA cables on the PAC RP5-GM11 used for? Can they be used to retain a factory DVD player of a 2005 GMC Yukon with the Bose system? I installed a JVC radio with a back up camera, everything went well, but trying to retain the DVD system on it. Is there anything I can do?
Ok I used pac audio in my 2015 f150 xlt I have all steering wheel functions except being able to talk through bluetooth as far as telling stereo to call from contacts the stereo requires me to manually touch the phone icon to dial. ??? Stereo is 2018 eincar android 8.0 external moc but also a wire on back with Male plug NOT A 3.5MM but a regular snap in.
Do PAC harnesses work with BOSS stereos? I got an RP4-VW11 for one, and I have two questions:
1. The SWC connection from the harness has a blue/yellow wire and a 3.5mm jack. My stereo just has a couple of wires labelled SWC 1 and SWC 2. How do I make this work?
2. Should I use channel 7(listed as Pioneer/Other) for the radio switch setting? It seems like the obvious choice, but I'd like some confirmation before I begin.
+Matthew Zornow for that I would recommend calling there tech support. The will try to give you a hand.
2006 dodge ram 1500 for a boss built-in navigation bv9382nv. I don't know what to use
the OS-5 (and maybe the RP5 GM31) has a solid blue wire for Onstar Volume Adjustment. I have an AVH-4200NEX. do I need to hook up that wire or no?
Misael Cartagena no you only need it if you want OnStar louder, other wise cap it off
hey i have the pac roem-nis2 and there is a amp turn on wire and a power antenna wire what do i connect them to on my pioneer wire harness for my avhx2700bs
Connect them both to the blue white wire in the Pioneer harness. Thank you for the question.
Hey I need one of that kits for installing on Mazda 3 w/Bose and alpine iLX-107 do you have something
Hey I have a 04 Nissan armada with bose I bought a reom nis2 my factory radio has 4 harnesses on back will I need to connect to all 4 or just the main 2 with power etc and what are the other 2 harnesses for..... Thanks.....
You will just need the main 2. One is for steering wheel controls and the other is for the AUX input
PAC is way better than axxess imo. Never had a issue with one.
Tech Metal 👍🏻👍🏻👍🏻👍🏻😆
Hi dean just wondering if you can help me
Installed a pioneer avic into a vw caddy with PAC audio for a vw
Problem is the car has a engine stop start feature what happens it turns the radio off then back on
Can I use a different PAC audio product to bypass this
+John Perez great question, I will have to check on that. Email me you info and I will see what we can come up with. Fivestarcarstereo@yahoo.com
Just found your channel recently, I used to be an installer LONG before this computerized BS crept into mobile audio...and I have to say without a shadow of a doubt that you two not only inform but do it in an entertaining way and actually SHOW stuff instead of just yap about it. Keep it up and thanks to this video...I'll have an easier time putting a CD player into the girlfriends new car. I hope...
+Kenneth James thank you for the kind words and have fun.
Your very welcome...keep it up classy and I promise not to seriously botch up a A.B.C. Kenwood DNX570HD install into my '98 F150...lol. Oh crap...off to the store for something to cut some plastic with!
I need help. I just installed a Pioneer AVIC 8100 NEX into my 2011 GMC Yukon XL with BOSE and Nav. I can't get the rear speakers and the sub to work. The front speakers are the only owns that work. Any suggestions?
Are you testing the using the fader? If so that is why. The factory amp only use the front left and right for signal. Fader and sub controls don’t work
I have a 2005 Chevy Avalanche 1500 with active XM subscription and Bose Audio with the stock radio. I would like to add an AUX input to the vehicle without disrupting my XM Radio so I can switch between them as well as keep my stock head unit. How would the best way to go about this be?
TheSlimCP check out this
www.pac-audio.com/productDetails.aspx?ProductId=97&CategoryID=24
I had the same question . Even though I don't use the XM I didn't want to hack it . I got one of these It has aux in and transmits to the radio through FM flawlessly .www.ebay.com/itm/Bluetooth-Car-FM-Transmitter-Wireless-Radio-Adapter-USB-Charger-Mp3-Player/152991416858?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649
I got a 2002 gmc yukon denali with on star and bose and I want to use my steering wheel controls what kit would I need to put in an aftermarket stereo
Andrew Strickert do you want to keep the onstar? If not, it is just the basic wire harness and the swi-rc steering wheel adapter. Also if you would like a double din Metra makes one. Go to www.metraonline.com to check it out.
Five Star Car Stereo. I don't use the instar I don't really need it
Andrew Strickert if you are keeping the Boss you will need ROEM GM21A and the swi rc
i just had the Pioneer AVIC-5100Nex installed, but my Sync phone and speak bottom on my steering wheel don't work. What Item do i need to buy to have that work?
What ford do you have? Did you have a steering wheel control installed? If not check out the Pac-audio swi-cp5 it will work all the buttons on the steering wheel. Thank you for the question.
+Five Star Car Stereo I have a 2008 Ford Edge. The only keys that work are the volume buttons. Sync and talk ones don't work. Also the USB and AUX ports in my center console don't work. And I now have to use a new speaker to speak out of for the new NEX 5100 is that normal?
So there are a few things you can do. The steering wheel controls can be made to work when installed properly. There are extras wires that need to be connected at the sync brain ( located in the armrest) to get those buttons to function. The USB can be made to work if you unplug the factory USB ( located at sync brain)and add a female micro USB to male standard USB. Then plug it into the back of the radio. The Aux is a little trickier, that you have to cut the factory Aux wires and wire it to an Aux cable. It sounds worse than it is, most good shops should be able to do this. If your installer needs help have them give us a call.
PAC ROEM-GM21A System Interface Kit to Replace Factory Radio and Integrate Factory Amplifiers for Select 99-02 full size GM/Chevrolet SUVs
What this be good to just install a pioneer Bluetooth to keep using the stock bose amp and keep using my features except the OnStar I really don't care for it cuz it don't work. Oh plus would my parking assistant keep working? How about my steering wheel controls if they don't work it's okay I just want to have the good bose sound stock sound with the Escalade just upgrade the radio with Bluetooth and make sure everything else is going to be working fine. I would so appreciate if you could reply back with a answer. you guys are one of the channels I watch for my radio information and I like that you and your partner are perfect partners because you guys look like good friends and hearing it in Spanish in English is a plus. Thank you will appreciate if I get an answer back thank you. On top of this I am ordering the antenna extension and single DIN radio kit do I have to buy the kit to run from the stock plugs to a aftermarket radio or does that come in the set with the pac setup
I have been everywhere including Pac customer support (ugh, they kinda suck) I installed a RP4.2-TY11 in my 2004 prius with JBL and nav, everything installed fine...except the JBL amp volume, when I first start the car will bounce between 33 all the way to max (60) up and down intermittently. (the jbl amp displays the volume going up and down on the Prius multi function display) if I make a call through the radio it will stop but, that just might be a coincidence, for the first 5 to 10 min it will do this and then just stop...until I turn off the car for a few min, then it will start all over again, just for the record, I already used the pac software to disable auto fade on the jbl amp. any help would be appreciated, One more thing, I reinstalled the OEM radio to test if it was something to do with my pioneer 3600bhs or the pac interface and the volume on the JBL amp does NOT do it with the oem radio. also, I updated the radiopro4 firmware prior to install.
Personally when we beta tested this harness things did not always go as planned. I would return it and go with the TATO and the swirc, the old combo.
One more question, If I am not able to return the RadioPro4 (I no longer have the box and I bought it from crutchfield months before the install) could I still utilize the steering wheel control part and install either the TATO or Metra TYTO-1?
+Lance DiBitetto we use the pac but either will do. The wiring may be a little funny, but I don't see why not. Make sure the data wires are not connected on the rp4, they are not needed for the steering controls.
What about turn signals
I'm totally lost with my install. I purchased a joying head unit for my 2011 Mazda 3 sp25 (w/bose). what do I need to get this working? I have already have the double din facia kit.
Sorry I meant to add I don't live in the USA so cannot vist you guys
Marc Faraday you are going to need a smart harness for that car. Depending on where you live you may be able to get the PAC -audio RP4-MZ11. If not let me know where you live, we have other venders we could recommend.
Five Star Car Stereo Thanks for the reply. I decided to purchase the pac unit from amazon. It was around $100AUD ($86USD). Here its was around $250. Almost all swc units in Australia are over the $250 mark (for amp version). God do we get ripped off here lol.
Marc Faraday wow ouch, let us know how it goes
Will do. The only thing I'm a bit confused about is if a need a line output converter because of the bose amp.
Yeah things in Australia are very expensive. I know of people who travel from Australia to the USA to purchase Christmas presents and save money then buying the same things here. Plus the lack of options is a killer.
is it Peter than change the stereo dodge charger 14 alpine system
+ayashi070 if you would like to keep the radio but upgrade the rest, check this out
www.pac-audio.com/productDetails.aspx?ProductId=1378&CategoryID=28
I'm from saudia Arabia how can i buy
2012 Silverado with steeing wheels conrols Bluetooth on star and xm. which harenss do i need
The RP5- Gm31. I would recommend getting the SXV300 sat tuner and the SAT1 antenna adapter. To try and retain the factory one will drive you nuts.
+Five Star Car Stereo what if you don't use the xm radio because I dont
+Five Star Car Stereo and I don't have navigation
+Five Star Car Stereo but it a 2500hd
+chris linz ok then you will just need the RP4-gm31 if you do not want to use your on star. If want to keep on star you will need the RP5
can these products improve the overall sound without the addition of a new radio. i have a 2014 challenger rt and i swapped the oem factory speakers with jl audio c2 6x9's in tje door and c2 6.5's in the rear. a local installer in my area suggest i add this product to "get a better signal to the speakers for improved full range sound". in short I want to know if this is true or if the installer is full of shit lol. There is not alot of information om the product on line.
+Vincent Tooles these are just for replacing the radio. He may have been talking about the new Amp Pro. If you have the factory amplified system, it will let you add aftermarket amps. Otherwise these will not help you.
Five Star Car Stereo thanks for replying to my comment. it was indeed the new amp pro and it was the best $254 I've even spent on car audio in my Challenger RT shaker. This product mimicked adding an afternarket radio to mu system and the difference in sound quality is night and day. With my stock radio when i turmed the volume above 32 the bass seemed to decrease due to the factory safegaurds. Now the bass increase coincides with the increase of volume. sounds phenomenl.
Anyone who disliked this video probably hooked up to the ignition wire
Spanish got him really pissed at the end of video 😢