hello, im having an issue when i use the spline path. i made a circle spline and want it to loop, but when it gets to position 100 it glitches and flips on the last frame before starting back over.
great tutorial, but i have problem with tag Constraint, i can not click expression and put 100, i watched other also about rig car but there also same problem with Constraint its grey and i can not click it. pls help me how i can fix it?
hey just wanna ask how do u get ur front wheels to be working? im unsure as to why i have to put my Left bind on the right and vice versa for it to work
Followed the tutorial as shown, rig works well. However, I have a wheel speed issue. The rear wheels spin x2 faster than the front wheels. When I move the rig using the purple main controller, wheels move correct. On a spline, they misalign. Care to check for some feedback?
1. The viewport doesn't render the wheels accurately, they usually look fine in render. 2. Go to car main > controls in your object viewer and check the settings there.
@@LeonBaisden Wheels function only when surface collide with mesh. If spline-wrapped, they do not. I worked my way around it by putting a final divide maths node inside the wheel rotate XPresso.
@@LeonBaisden Thanks for the reply! Appreciate that. I also ran into a problem where the wheels end up turning the opposite way. When moving forward the tires move in the opposite direction. I can send you a link to the clip i have rendered for an example. Let me know and thank you! - Mylo
@@THEIANDO I used x-particles volumes. They have a smoke preset, I just added wind and attached the sim to the tires. Not really the proper way to do it, but it works.
@@LeonBaisden yeah it does! only issue i had was with the spline, obviously you'll have to export the c4d landscape and build around that in UE5 for the car to 'drive' on it.
Hey Leon, epic vid. Do you think a M1 Max studio with 32GB of ram is enough to do short B roll car animations. Something like a tunnel or forrest. The render times aren't too important, happy to run scenes overnight. ive been using keyshot but would be keen to switch into C4d or unity
you could have at least said what point to be where. but just moving the points around without an explanation. IS NOT HELPING. or just a labeled diagram of the points in relation to the car parts
damn it! this is impressive! in Maya it take way way more time to setup everything! Amazing to see how it goes in C4D!
u can dot it with craftanimation in maya better
Eager to see more tutorials from this channel in the future.
Hey! My constraint settings is all grey... I cannot check any box or change the expressions values... Any help?
Thank you for your clear explanation that's working really well cheers !!!
Wow Thank you so much!
Good luck bro actually your video help me more than other videos !
hello, im having an issue when i use the spline path. i made a circle spline and want it to loop, but when it gets to position 100 it glitches and flips on the last frame before starting back over.
very clear a tutorial, thank you for share this
Great tutorial! What city assets are you using?
Kitbash3D
Trackhawk... NICE
Thank you so much, very good explained
thank you bro very much. It is so useful tutorial. I liked it
How do you clean up the car model to have 9 parts ?
Any video on that
awesome TUT!, any idea why my car wheels stop rotating when i have the car on a spline? they work fine when not attached to a spline
i love the motion blur
thank you bro i tried it and it works good job
Another good tutorial
can do open to the ca's doors?
Hello, what can I do to get fast rendering of my RTX 3060 laptop?
its doesnt show anything on ""Controls" tab under the Char Main object ? like vibration, delay, etc ??
great tutorial, but i have problem with tag Constraint, i can not click expression and put 100, i watched other also about rig car but there also same problem with Constraint its grey and i can not click it. pls help me how i can fix it?
Good keep going 👍
How to do it wheels motion blur ??!
Wow!👍
great vid thx a lot man for sharing
hey just wanna ask how do u get ur front wheels to be working? im unsure as to why i have to put my Left bind on the right and vice versa for it to work
Not sure what you mean, I just followed this tutorial today for another car project and it worked fine.
Brilliant. Thanks man!
Glad it helped!
How do I add a extra tire to the rig?
When i turn the wheel the car is deforming from the steering wheel point. What am i doing wrong. Fairly new user so any idea?
Followed the tutorial as shown, rig works well. However, I have a wheel speed issue. The rear wheels spin x2 faster than the front wheels. When I move the rig using the purple main controller, wheels move correct. On a spline, they misalign. Care to check for some feedback?
1. The viewport doesn't render the wheels accurately, they usually look fine in render. 2. Go to car main > controls in your object viewer and check the settings there.
@@LeonBaisden Wheels function only when surface collide with mesh. If spline-wrapped, they do not. I worked my way around it by putting a final divide maths node inside the wheel rotate XPresso.
@@orfeasantoulinakis9856 glad you figured it out.
Bro put that hdri link , you added in that car video.
how do you add body roll. for going round corners and also when accelerating and stopping? thnx
You have to keyframe the steering wheel turn at the corners,
Thank you!
So cool!!!
Thx 🔥
Hello, when i use the a spline path to direct the car, the car tends to slow down every time it reachs a point on my spline path. Any way to fix that?
Change easing on your spline to linear.
@@LeonBaisden Thanks for the reply! Appreciate that. I also ran into a problem where the wheels end up turning the opposite way. When moving forward the tires move in the opposite direction. I can send you a link to the clip i have rendered for an example. Let me know and thank you!
- Mylo
@@mylocreative Sure send it to me. leonbaisden.com/contact
@@LeonBaisden Sent! Thank you very much.
how to fix collasion mesh not working?
not sure what you mean.
increase segments + make it editable
@@TheBoss-pk6up its work !!!
@@LeonBaisden the Ground Collision not working, like the car don't see it, its go inside it!!
@@mrbigm3149 Have you tried the solution listed above? increase segments + make it editable
is there a way to make the suspension more reactive?
Yes add collision mesh as I should at the end.
@@LeonBaisden perfect ty! also how did you achieve the tire smoke sim?
@@THEIANDO I used x-particles volumes. They have a smoke preset, I just added wind and attached the sim to the tires. Not really the proper way to do it, but it works.
I have c4d 2023 is it will work with this?
Yes it would
my wheels move oddly when i try to look at my rig in animate mode
THX U SO MUUUUUUUUCH BUDDY !!!
Does the car need to be of a specific size for the rig to work ?
no you can adjust the rig.
How do you make it so the suspension are more bouncy? like on 4x4 they tend to be bouncy
Try changing the height of the front and rear axels points.
is this able to be exported to unreal with this method?
Not sure, I don't use unreal, if you find out let me know.
@@LeonBaisden yeah it does! only issue i had was with the spline, obviously you'll have to export the c4d landscape and build around that in UE5 for the car to 'drive' on it.
whenever I try moving those little spheres around they end up into space.
👏👏
if my wheels are wobbeling, does it mean my points are wonky?
Yes, check the points on the rims.
7:17
Hey Leon, epic vid. Do you think a M1 Max studio with 32GB of ram is enough to do short B roll car animations. Something like a tunnel or forrest. The render times aren't too important, happy to run scenes overnight. ive been using keyshot but would be keen to switch into C4d or unity
Hi I actually did a video on this. MacBook Pro M1 Max Long Term Review | A Motion Designer’s Perspective
ua-cam.com/video/M5dpYesscq8/v-deo.html
Which version of arnold renderer are you using ?
I have Arnold 4.0.2 installed I think. For the car render I used redshift ua-cam.com/video/M5dpYesscq8/v-deo.html
Hi can you make album cover for my song and use the same cover to create short video for Spotify canvas?
If yes! How much you charge me
Finally a great auto rigging tutorial! Showed up in the nick of time. Used it here:
ua-cam.com/video/DQS9HzyUVyI/v-deo.html
you could have at least said what point to be where. but just moving the points around without an explanation. IS NOT HELPING. or just a labeled diagram of the points in relation to the car parts
Thank you!