Wazzzzup! With our old rides, use lube always, add grease at points needed, remove all rust while your " in there"...keep turning that wrench... one love
Nicely done! I need to get front cambers arms too.. camber now after lovering nearly -3 in front :D olso like on most these ef right side is more in to minus then left..
I watched to see if grease was added to the ball joint. I have these arms for my crosstour. And if they are pre greased as they should be doesn't seem sufficient.
@@themechanic6117 me either. They are pretty stiff. I've. Only had mine on for 1 week. I'm going to reach to k-tuned for reinsurance. Just doesn't seemed lube when pressed the boot like a empty feel. If that makes sense. Even when I moved it by hand during install.
Do you have shock tower extensions? I have these same upper control arms for my DA9 and they were hitting my strut towers hard. I had to raise it back up. I'm going to try Skunk2 since they're less bulky and if that doesn't work, I'm going back to OEM upper control arms.
FROM WHERE DID YOU ORDER OR PURCHASE YOUR "K·TUNED" PARTS I HEAR THERE'S FAKES SOME IMITATION OUT THERE JUST WANNA BE SAFE ON MY PURCHASE ??? THANKS IF YOU CAN GET BACK AT ME WITH A REPLY
Is one lighter than the other? I'm using a fidanza light weight flywheel because i like the faster revs. If you're sticking with oem id go with whichever weighs less
FROM WHERE DID YOU ORDER OR PURCHASE YOUR "K·TUNED" PARTS I HEAR THERE'S FAKES SOME IMITATION OUT THERE JUST WANNA BE SAFE ON MY PURCHASE ??? THANKS IF YOU CAN GET BACK AT ME WITH A REPLY
Wazzzzup! With our old rides, use lube always, add grease at points needed, remove all rust while your " in there"...keep turning that wrench... one love
Looking good Jonathan, she’ll be ready for the car show in no time!
Not trying to win any awards lol but she'll be decent
Love these crx videos. And who cares if you want to be over protective working on your own car. More mechanics should care half that much.
I agree, some techs dont care for other peoples cars. I'm trying my best here
I like the visual "effect" when the torque wrench clicks. LOL
The car is coming along nicely!!!!
Thank you . i think its a neat touch in editing. I also like how it turned out , i think ill be using it more often
Those upper control arms are beautiful, good job👍
Yeah i like them. They look great
Great videos i watched allur crx videos and very professional about your work good job can't wait to see the rest
Thank you for watching and leaving a comment 👍 plenty more crx videos coming
Great job Jonathan! Getting very fancy there 😉👍
I drink my tea with my pinky finger up 🍵 ☝😂
The mech a nic 🤣🤣🤣
Great video and nice bit of kit.
Thanks for watching.so far I'm happy with the kit
@ 2:58 perfection.
Nice job bud. Like the custom wheel studs , longer is better :)
Yes, i need to do the rest of the wheel studs 👍
Nicely done! I need to get front cambers arms too.. camber now after lovering nearly -3 in front :D olso like on most these ef right side is more in to minus then left..
Definitely need a camber kit 👍
These Ktuned arms look identical to Truhart. And both say they use HardRace bushings.
They do look the same. As long as they perform well im happy with them. Thanks for watching
Good job bro
Thank you
from where you got all the torque specs for all nuts and bolts
Honda book that I have
I watched to see if grease was added to the ball joint. I have these arms for my crosstour. And if they are pre greased as they should be doesn't seem sufficient.
I dont remember seeing a grease fitting on these...
@@themechanic6117 me either. They are pretty stiff. I've. Only had mine on for 1 week. I'm going to reach to k-tuned for reinsurance. Just doesn't seemed lube when pressed the boot like a empty feel. If that makes sense. Even when I moved it by hand during install.
New balljoints are always stiff. Almost to the point where you cant move them with your hand.Doesnt matter what brand it is. Thats normal.
@@themechanic6117 of course. Thanks for reply
Do you have shock tower extensions? I have these same upper control arms for my DA9 and they were hitting my strut towers hard. I had to raise it back up. I'm going to try Skunk2 since they're less bulky and if that doesn't work, I'm going back to OEM upper control arms.
No I don't. They bolted up just fine to my crx . No clearance issues
FROM WHERE DID YOU ORDER OR PURCHASE YOUR "K·TUNED" PARTS I HEAR THERE'S FAKES SOME IMITATION OUT THERE JUST WANNA BE SAFE ON MY PURCHASE ??? THANKS IF YOU CAN GET BACK AT ME WITH A REPLY
I got mine directly from k tuneds website. You can also order from jhpusa to be sure you get real parts
Nice video what type of bushing did you get with it?
Just standard hardened rubber. Not a fan of spherical bearings
Are they spherical bushings?
Sorry just saw the reply haha
On a k24 swap would you recommend the k24 flywheel or the k20z3 flywheel?
Is one lighter than the other? I'm using a fidanza light weight flywheel because i like the faster revs. If you're sticking with oem id go with whichever weighs less
None of this makes sense. I'm so confused. 😵
Not sure what you mean...
I'm just joking. You said you hope this isn't confusing when you were playing footage in reverse. This is a great video 👍
Lol I see. Yeah the original footage looked horrible so i had to improvise 😝👍
FROM WHERE DID YOU ORDER OR PURCHASE YOUR "K·TUNED" PARTS I HEAR THERE'S FAKES SOME IMITATION OUT THERE JUST WANNA BE SAFE ON MY PURCHASE ??? THANKS IF YOU CAN GET BACK AT ME WITH A REPLY