Focus ST Steeda Ram Air Intake Scoop 2013-2018 Installation

Поділитися
Вставка
  • Опубліковано 25 лип 2016
  • Bill shows you how to install a Steeda Ram Air Intake Scoop fitting on your 2013-2018 Focus ST.
    Lowering the air inlet temperatures while increasing the horsepower and torque on your 2013, 2014, 2015, 2016, 2017 or 2018 Focus ST, this Intake Scoop from Steeda is going to form a velocity effect, naturally enhancing your power.
    This molded plastic scoop is USA made and tested, ensuring crisp air directly flows to your intake.
    Purchase Product Here:
    www.cjponyparts.com/steeda-ra...
    Check out more Focus ST parts from CJ's here:
    www.cjponyparts.com/ford-focus...
    Check out more Steeda parts from CJ's here:
    www.cjponyparts.com/steeda/c/8...
    Subscribe to CJ Pony Parts on UA-cam here:
    ua-cam.com/users/subscription_c...
  • Авто та транспорт

КОМЕНТАРІ • 45

  • @JPTHRICE
    @JPTHRICE 6 років тому +23

    seems like every mod no matter what is ~150$ or more

  • @tastysavage2722
    @tastysavage2722 7 років тому +24

    Was going to buy until the 140$ price tag. No thanks.

  • @Brendenowits
    @Brendenowits 8 років тому +16

    really $140? wth i probably have something this shape in my garage. should start selling it lol

  • @ElKoKoWaPPo
    @ElKoKoWaPPo 4 роки тому +5

    are there any problems when it rains?

  • @lek69791
    @lek69791 5 років тому +1

    I made my own with the vacuum cleaner tip and hose works great .and is stealth from the grill 2010 jeep SRT 8

  • @tdrewman
    @tdrewman 7 років тому +50

    140 dollars for 10 cents worth of plastic ???

    • @WhiteGravey
      @WhiteGravey 4 роки тому +4

      get one of ebay for 9.99 its just a fucking piece of plastic

  • @chrisb4013
    @chrisb4013 7 років тому +8

    how much does it cool down intake temps?

  • @jeronmurano4627
    @jeronmurano4627 4 роки тому

    Do you happen to know if this air scoop is compatible with the fiesta st as well?

  • @michaelmorales2628
    @michaelmorales2628 6 років тому

    Is there 1 for the Fiesta ST?!?!

  • @DaddyEric222
    @DaddyEric222 8 років тому +29

    I have access to a 3D printer... I think ill just print one for about $5 in material. Thanks for the video though!

    • @pilotprojekt07
      @pilotprojekt07 7 років тому

      Eric Fling you have make it?

    • @DaddyEric222
      @DaddyEric222 7 років тому

      Nope, started working more on motorcycle parts. Car is at stage 3 and I like it where it is.

    • @pilotprojekt07
      @pilotprojekt07 7 років тому +1

      Eric Fling dammed.i have ordered one by you

    • @relentlesschaos95
      @relentlesschaos95 6 років тому +1

      That is what I am gonna do too!!

    • @jackpenrod2452
      @jackpenrod2452 6 років тому +1

      relentlesschaos95 did you design it? Could you send me a file to print too?

  • @Racer-M
    @Racer-M 3 роки тому +1

    I remember the first time i used a dremel too.

  • @Zander13Productions
    @Zander13Productions 7 років тому +2

    overpriced but will this fit an RS?

  • @josepgutierrez22
    @josepgutierrez22 3 роки тому

    What about when it rains?

  • @s197gt6
    @s197gt6 Рік тому

    All that work for that part? I'm good.

  • @29jvskate
    @29jvskate 5 років тому

    nice video! will this fit the fiesta st?

    • @cjponyparts
      @cjponyparts  5 років тому

      It was designed specifically for the Focus, I never tried but I doubt its a direct fit.

    • @29jvskate
      @29jvskate 5 років тому

      thank you!
      @@cjponyparts

  • @hunterhayes2002
    @hunterhayes2002 3 роки тому

    Hey! I was wondering if this would fit my 2013 Focus "SE". I live in Arizona and heat soak has been an issue every summer; especially with a stick. Weather above 90° is causing a hesitation problem when starting off and when rev-matching. Thank you!!!

  • @OSPFv4
    @OSPFv4 6 років тому +1

    Would hydro locking be a problem with these? I am in the Las Vegas area so its pretty much dry and not wet almost all the time, but would that one rare rain storm hydro lock my car with this on it, also would car washes be a problem. Also I generally dont drive through flooded areas like a manic in the rain, and if i do its usually like 3 inches of water.

    • @cjponyparts
      @cjponyparts  6 років тому

      Unless you drove through standing water as high as the scoop you will not have any issues.

    • @zlothra
      @zlothra 6 років тому

      Shouldn't be an issue, depending on your Air box/filter setup you will suck in some moist air. Gravity may keep most water out but anything that's misty will be sucked in. Similar to you sucking air through a straw next to one of those mist fans.

  • @MyPandaRawrs
    @MyPandaRawrs 8 років тому +6

    song sounds like bulls on parade :p

    • @ThWind81
      @ThWind81 8 років тому +3

      Yeah that seems like a stolen riff for sure.

  • @memomemorias7863
    @memomemorias7863 6 років тому

    what about when it rains won't is suck up a lot of water

    • @Lafaa123
      @Lafaa123 6 років тому +3

      No, gravity and the air filter will prevent moisture from getting into the intake, unless youre literally driving through a lake

    • @zlothra
      @zlothra 6 років тому

      If your air box is completely closed you will suck up some moisture. Especially in heavy rain, like suckling air through a straw. Not much to cause harm.
      If your aibox is opened, like the Roush air box and filter, used on the non turbo models, then it won't have enough air pressure to suck anything up. It would be used to help bring more cold air into the air filter area.

  • @2205678
    @2205678 5 років тому +3

    $140 for that piece of plastic? Really?

  • @MrDEANOSCOOLVIDS
    @MrDEANOSCOOLVIDS 7 років тому +6

    good way to suck up water and dirt

    • @DevinShillingtonSkateboarding
      @DevinShillingtonSkateboarding 6 років тому +3

      Dean Fleming if you ram your car into a foot and a half of water yeah. Aside from that, thats what a filter is for.

  • @WhiteGravey
    @WhiteGravey 4 роки тому

    haha at comments. if you guys think this is bad theirs another company selling them for 180 hahaaaaaaa. check ebay you guys might find a deal

  • @casey6518
    @casey6518 6 років тому +5

    Not worth the effort to remove the nose cover...

  • @MikeBeazy
    @MikeBeazy 8 років тому +8

    LOL what an overpriced tube

  • @MasterCarguy44-pk2dq
    @MasterCarguy44-pk2dq 7 років тому

    Not really ram air. Air is sucked in.

  • @oceanhome2023
    @oceanhome2023 6 років тому

    I see no advantage with this , it merely moving the air intake to the bottom of the nose will not bring in colder air

  • @DtoTheDott
    @DtoTheDott 5 років тому

    ..... dumb . I would never put that on my st. True cold air he says.... lmao I'm not even going to try and explain why this is silly