Just got my pxn v9 two days ago and I am already facing the problem that the throttle is flickering do you have any idea how to fix that? It's a little different then g29 pedals
04-10-2024 it freaking works 🥹 My throttle has been fluctuating for like 2 months and I’ve been tryna make due (not trying to spend anymore money). But last night the brake pedal started doing some real weird ish and I was like aight time to take it apart. Lo and behold my pedals were HELLA DIRTY on the inside. Perks of living with a stylist all types of thread and hair and dust. Cleaned it, did the alcohol thing with the silver pieces, put it back together and boom like new baby 🙏🏾🙏🏾🙏🏾🙏🏾 Thank you bro I know this video is old but I wish you and all reading the best. We’re all just tryna have a lil fun when we get home and you saved me $300 bucks. Gracias my friend ✊🏾💪🏾
(5-27-2024 edit) it’s fluctuates again at the top of throttle making it difficult again. But there is a decent solution. When you open it next time or not(you can use this method even without taking it apart) spay it with some contact cleaner. I used wd-40 electrical cleaner. NOT REGULAR WD-40 that will mess it up. Use any contact cleaner for electronics. This will help immensely 👍🏾 spray the silver portion (potentiometers) and enjoy 🙏🏾
I have a second hand G27 which had a decent amount of dust and animal hair in when I opened it to make quietening and brake mods. Cleared it all out but some must have got to the potentiometers because they were jittering or dragging afterwards. This video solved that problem for me. I prefer to route the cables into the little clip channels on the upper plastic casing though. That would be easier if you do the box trick (flip the unit upside down and sit it with the pedals inside a box and the plastic resting around the edge), then remove all screws and base plate so you have only the upper plastic and individual pedals sitting within it.
This works okay for a while but the problem will return. To achieve a long term result the potentiometers need to be removed, dismantled and cleaned with a circuit board cleaner and cotton bud. Then a light layer of dialectric grease (non electrically conductive grease) needs to be applied to the contact mating surfaces. This will greatly extend the life of the potentiometers and give trouble free operation for quite some time. I did this six months ago and have had no trouble since.
@@muhammadrazzanputra8121 I started off doing that but it reaches a point where spraying doesn't work anymore. The contact surfaces wear down and get dirty. So the best option is to dismantle, clean thoroughly and apply a light coat of dialectic grease.
2 роки тому+4
This is the best answer cause i sprayed maybe couple of times. Each time the effect was less. Last time it only took 2-3 days to flicker again. Deadzone is not working too cause some flickers are reaching 50%. I have this problem both in my brake and throttle. I think i need to dismantle it. I'm afraid of broking it but it's not playable like this. Especially in iracing. DRS closing in straights.
@ just logitech being shit man im in same situation. had them apart so many times, i use half pedal travel to aid this and still have flickering. after 2 years, ive bit the bullet, get some different pedals dude, logitech is fucking garbage.
Hi, I watched this clip one night, I noticed that the accelerator pedal sometimes flickered and it was annoying to play. I looked at this tutorial as I didn't have a special solution and I came up with engine oil and it works perfectly!
I had this issue with my brake pedal since I bought my G29. I sent it back a couple of times to fix it during warranty, but they sent it back saying it works perfectly fine. So I used the clutch pedal as brake for years. I followed your method and now it works as it should have been in the first place. Thank you very much!
I was a bit sceptical when watching the video. But then I tried out and it worked perfect. I will never say again: "Alcohol is no solution". Thank You very much.👍👍👍
Thank you, very nicely explained and easy to follow! The pedals feel like they are fresh out of the box - hopefully it stays like that for a long time :D
Nice, easy to follow and i fixed it, having heavy flickering problems with clutch and throttle for about 3 months, maybe even more, thought it was done for, but now it's feel brand new. Ty mate.
Dude thank you so much! I did exactly what you did on my 5 years old logitech and pedals seem brand new. I’m so happy, I was afraid I had to waste a couple hundreds for a new wheel but you saved me!!
Thank you very much ! I really hated this problem. I use my g920 every day to improve my Racing skills, so it's terrible to have something like this. Now I know how to fix it. Keep up this great work :)
Yes!! I found out mine had this problem during a race, when the car just wasn't keeping up with the lap times, it seemed to be slower on the straights... then I discovered the brake was ghosting and that made me slower. I'm happy to help!
I haven't done it yet... but I'm gonna tomorrow because of all the comments saying it works like the pedals are new came fresh from the box,thank you so much
Thanks so much dude. My accelerator was flickering and making drifting impossible. I dabbed some metholated spirits on the motor with toilet paper while pumping the throttle and the accuracy came back within minutes. Great stuff!
Thank you man I just fixed the pedals now. There was a whole bunch or animal hair in the potentiometers, the gears and there was packing foam in the brake pedal! As soon as I cleaned then out, they were brand new. Thanks!
My gas pedal used to flicker from time to until it won't get full throttle when my foot is all the way down so I watch your vedio and it worked way better than I thought it would and I just wanted to say thanks bro
Worked for me and saved me a lot of trouble seeing as this was the first video that popped up on my search, So the first thing i tried. i honestly didn't even think those ground wires were even really needed
Hey guys, if this didnt work for you, then try taking off the pedals and deep clean it all. Then remove dust and shit, and then spray some WD40 in those small circles on the side of the pedal, into the small gap. That fixed it for me!
This is just a quick fix to make them good again they need a complete strip down clean and di electric grease applied before reassembly i think you might be able to use silicone grease as an alternative
Can you also make a video to fix shift paddles? The left shift paddle of my G27 doesnt work anymore :( This video will help me a ton to fix my pedals which have exactly this issue and it looks like its overloaded with dust, because you can see tons of dust between the pedals already with the case still on.. You explained it really well and with very good camera too. Thank you.
My brakes flickered every now and then when I was on forza motorsport 6 just driving cars around. Is there any way that the brakes can continue to get damaged if not fixed?
Hey man I've had this issue come up in the past but I've always been able to fix it doing this exactly! But now it seems to only stop it for about 2 laps of drifting and then it comes right back. It's my day off and I'm just tryna drift man! Lol any help is appreciated :)
Make sure to use 100% (or 99%) isopropyl alcohol to prevent short circuits. Some have only 70% and the rest 30% are water (isopropyl alcohol is non-conductive but water is).
Just did it and my pedals are working again! Thank you very much for this video! Amigo, Valeu demais pelo vídeo! Os pedais voltaram a funcionar normalmente! 💪🏁
This actually worked, brake pedal acted as half a clutch and clutch was not responding at all, squirted some alchohol slammed the pedals and shes new again!
I have an issue where I will be driving in a game and when pressing the accelerator the brake will apply. Often when I let go and apply the accelerator again it will still show brake lights. Checked mapping, all seems fine. It’s not until I touch the brake pedal again that this stops for like 5 minutes. Would you recommend this video for this issue?
Thank you very much. I've been looking for this quite long. I got the DFGT instead of the G27 and I thought G27s don't have this issue. I'll try it when I got the time.
This one is great i tried with alcohol first time and it was great, but there is second video of guy doing it with WD-40 and yeah second time i clean it with WD-40 and it passes 6 months and still working perfect so this method is great but cleaning potentiometers with wd-40 had better result for me. Cheers great video tho!
I finally got this issue after 6 years of use on my g29. Went to go open it up, turns out someone previously put red threadlock on the pedal screws. Could only get two out before absolutely destroying the little hex key and the screw heads. Time for a wheel upgrade I suppose.
I appreciate the help but it seems that the potentiometer in the brake pedal itself in my G29 is completely busted and registers input when me and my Dad put it back together. Going to buy a G923 to replace this aging thing as I've had it since early 2018.
I do not recommend buying the g923 as the pedals have potentiometers as well. From experience my g923 pedals started flickering after a few months of use from buying them brand new and I took really good care of them as well. I tried this method on them only for the same issue to come back a couple days later. I do recommend upgrading to load cell or Hall effect pedals since they will offer you more reliability in the long run
Mano se que el video es de hace rato. pero no basta con aplicar alcohol ipopropilico al potenciometro. tienes que limpiar por dentro del pedal la parte del engranaje que se mueve cuando lo pisas. ahi se junta polvo pelusas pelos de mascotas etc. tambien los pasadores de los pedales. y los conos de los pedales. el video sirve de guia esta super bien explicado . tenia ese problema por exceso de pelusones y pelos de mascota pero al limpiar me di cuenta que por dentro del potenciometro hay mucha basura que de seguro tranca el pedal si no lo pisas fuerte. tengo el mismo volante sabes de upgrades o cambio de componentes internos que lo mejoren? y otra pregunta la zona muerta del centro hay forma de corregir para que por ultimo le llegue fuerza?
My peddles are black where yours are red. Does that mean it might be different when I open it up? I don’t want to open it up and mess anything further. I have Logitech G920 for xbox x.
Do you have a link to a video that could help me open the potentiometer as I bought my steering wheeel second hand and I’ve had this problem a lot and I think dust and debris have gotten into potentiometer
Thanks man I had throttle flickering, switched the potentiometer of the clutch as I use the pads shifter. Had tried to clean but the flickering was there, anyway great video
Got a new T-GT after this problem. Always wanted to fix this pedal problem though. And it looks like my buddy is gonna be racing with me soon :) Slapped that like button like it owed me money! Thx man! Edit: It fucken worked! :)
i just got my g920 yesterday and im having a problem were it is roughly 40% accelerated always making it impossible to play and if i push down on the accelerator it wont accelerate anymore or any less i was wondering if this is still the same problem
I have this problem with the flickering and the pedals aren’t showing any inputs at all when I press them. Followed your tutorial but it hasn’t worked, is there anything else I can try
@@RacingLegendss , Oh, I forgot to make an update in my massage. So, where is a short because the alcohol from the cleaner didn't have time to dry, and then i just turned on the wheel. I fixed it by letting it dry. Anyway, thanks for your guide, it really helped me. Cheers!
It fixed my pedals too. Took me 15 minutes and my throttle telemetry looks brand new again. I know now that my pedals needed this three weeks ago.
Great!
Just got my pxn v9 two days ago and I am already facing the problem that the throttle is flickering do you have any idea how to fix that? It's a little different then g29 pedals
hey i wanna know if the fix worked till now or it went back to malfuntion after few days ?
@@siliconcrayon yes my pedals are still working wonderfully. I started doing a better job of keeping my cat away from my simulator rig.
@@siliconcrayon when I cleaned my pedals out before, they were full of cat hair and dander.
04-10-2024 it freaking works 🥹
My throttle has been fluctuating for like 2 months and I’ve been tryna make due (not trying to spend anymore money). But last night the brake pedal started doing some real weird ish and I was like aight time to take it apart. Lo and behold my pedals were HELLA DIRTY on the inside. Perks of living with a stylist all types of thread and hair and dust. Cleaned it, did the alcohol thing with the silver pieces, put it back together and boom like new baby 🙏🏾🙏🏾🙏🏾🙏🏾
Thank you bro I know this video is old but I wish you and all reading the best. We’re all just tryna have a lil fun when we get home and you saved me $300 bucks. Gracias my friend ✊🏾💪🏾
(5-27-2024 edit) it’s fluctuates again at the top of throttle making it difficult again. But there is a decent solution.
When you open it next time or not(you can use this method even without taking it apart) spay it with some contact cleaner. I used wd-40 electrical cleaner. NOT REGULAR WD-40 that will mess it up. Use any contact cleaner for electronics. This will help immensely 👍🏾 spray the silver portion (potentiometers) and enjoy 🙏🏾
I have a second hand G27 which had a decent amount of dust and animal hair in when I opened it to make quietening and brake mods. Cleared it all out but some must have got to the potentiometers because they were jittering or dragging afterwards. This video solved that problem for me. I prefer to route the cables into the little clip channels on the upper plastic casing though. That would be easier if you do the box trick (flip the unit upside down and sit it with the pedals inside a box and the plastic resting around the edge), then remove all screws and base plate so you have only the upper plastic and individual pedals sitting within it.
Yeah unfortunately I only discovered that a couple weeks after I posted this video but that trick is really good
This works okay for a while but the problem will return. To achieve a long term result the potentiometers need to be removed, dismantled and cleaned with a circuit board cleaner and cotton bud. Then a light layer of dialectric grease (non electrically conductive grease) needs to be applied to the contact mating surfaces. This will greatly extend the life of the potentiometers and give trouble free operation for quite some time. I did this six months ago and have had no trouble since.
Great addition to the video! That's a really good way to fix it long-term :D
What if you spray it like every once in a week or a month? Will the problem keep returning more often or something?
@@muhammadrazzanputra8121 I started off doing that but it reaches a point where spraying doesn't work anymore. The contact surfaces wear down and get dirty. So the best option is to dismantle, clean thoroughly and apply a light coat of dialectic grease.
This is the best answer cause i sprayed maybe couple of times. Each time the effect was less. Last time it only took 2-3 days to flicker again. Deadzone is not working too cause some flickers are reaching 50%.
I have this problem both in my brake and throttle. I think i need to dismantle it. I'm afraid of broking it but it's not playable like this. Especially in iracing. DRS closing in straights.
@ just logitech being shit man im in same situation. had them apart so many times, i use half pedal travel to aid this and still have flickering. after 2 years, ive bit the bullet, get some different pedals dude, logitech is fucking garbage.
Hi, I watched this clip one night, I noticed that the accelerator pedal sometimes flickered and it was annoying to play. I looked at this tutorial as I didn't have a special solution and I came up with engine oil and it works perfectly!
Yup that worked for me as well i took the pedals apart and then sprayed some WD40 into those small circles and deep cleaned everything else
I had this issue with my brake pedal since I bought my G29. I sent it back a couple of times to fix it during warranty, but they sent it back saying it works perfectly fine. So I used the clutch pedal as brake for years. I followed your method and now it works as it should have been in the first place. Thank you very much!
I was a bit sceptical when watching the video. But then I tried out and it worked perfect. I will never say again: "Alcohol is no solution". Thank You very much.👍👍👍
Thank you, very nicely explained and easy to follow! The pedals feel like they are fresh out of the box - hopefully it stays like that for a long time :D
Hey. How long did it stay like that for? :)
Nice, easy to follow and i fixed it, having heavy flickering problems with clutch and throttle for about 3 months, maybe even more, thought it was done for, but now it's feel brand new. Ty mate.
Dude thank you so much! I did exactly what you did on my 5 years old logitech and pedals seem brand new. I’m so happy, I was afraid I had to waste a couple hundreds for a new wheel but you saved me!!
Thank you very much ! I really hated this problem. I use my g920 every day to improve my Racing skills, so it's terrible to have something like this. Now I know how to fix it. Keep up this great work :)
Yes!! I found out mine had this problem during a race, when the car just wasn't keeping up with the lap times, it seemed to be slower on the straights... then I discovered the brake was ghosting and that made me slower. I'm happy to help!
I had the same problem as you but my pedal was the clutch
@@carkids460same bro I press 1 thing down all pedals activate
Only been experiencing this for around a year but i got fed up with it, did this and works like a dream again!
thank you very much it fixed my brakes braking by itself
I haven't done it yet... but I'm gonna tomorrow because of all the comments saying it works like the pedals are new came fresh from the box,thank you so much
did it work?
And ?
Thanks for the help! I scrubbed off the gears that roll when the pedals are depressed too.
thanks for the help, fixed my g29 pedals, the gas pedal was sending wrong values and now it's working perfectly fine!
brother, THANK YOU! my pedals where flickering a lot and now thanks to you they're like brand new
Thanks so much dude. My accelerator was flickering and making drifting impossible. I dabbed some metholated spirits on the motor with toilet paper while pumping the throttle and the accuracy came back within minutes. Great stuff!
hey man thank you so much. What sort of products can i use to clean the potentiometer? Like alcohol or compressed air or something
Yes, rubbing alcohol 99% (no water) is recommended, maybe contact cleaner if it doesn't have oils.
oh wow this worked! ive had this issue for years and thought my pedals were broken, this fixed it and they feel brand new thankyou!
Thank you man I just fixed the pedals now. There was a whole bunch or animal hair in the potentiometers, the gears and there was packing foam in the brake pedal! As soon as I cleaned then out, they were brand new. Thanks!
Having this issue after 5 years of use, my brakes dont do this very often but I might check on the pedals soon, thanks!
My gas pedal used to flicker from time to until it won't get full throttle when my foot is all the way down so I watch your vedio and it worked way better than I thought it would and I just wanted to say thanks bro
Worked for me and saved me a lot of trouble seeing as this was the first video that popped up on my search, So the first thing i tried. i honestly didn't even think those ground wires were even really needed
Thank you so much. Fixed my G25 pedal box in minutes... after spending an HOUR trying to get the rounded allen screws off the pedals :P Legend!
same, I struggled just to get those allen screws off
I’ve been trying to get this damn screw for an hour. It’s still there.
Hey guys, if this didnt work for you, then try taking off the pedals and deep clean it all. Then remove dust and shit, and then spray some WD40 in those small circles on the side of the pedal, into the small gap. That fixed it for me!
This is just a quick fix to make them good again they need a complete strip down clean and di electric grease applied before reassembly i think you might be able to use silicone grease as an alternative
Love the video production, this worked for me. Also while I was in there I took out the rubber stopper for the brake pedal. Thanks!
U r a saviour brother 🙏🏼🥲
Thank you for your help! I think this video helped me to solve the stucking gas pedal issue.
can you use normal alcohol?
I used a spray can of electrical contact cleaner. I sprayed it into the pots while pushing the pedal. Fixed it right away.
Thank you bro, I was over dramatic thinking I gotta buy way better equipment 😆
How do i fix my pedals, because all of them don’t work at all
Thank you very much brother I try to follow you. From the beginning, the swing brake pedal graph After doing that, I'm still.👍❤️
Can you also make a video to fix shift paddles? The left shift paddle of my G27 doesnt work anymore :(
This video will help me a ton to fix my pedals which have exactly this issue and it looks like its overloaded with dust, because you can see tons of dust between the pedals already with the case still on.. You explained it really well and with very good camera too. Thank you.
My brakes flickered every now and then when I was on forza motorsport 6 just driving cars around. Is there any way that the brakes can continue to get damaged if not fixed?
Will try this my 2nd-hand G29 pedals. Hope it works.
Thanks. Will give it a try and come back for an update.
Hi, can i use contact spray for contacts 4:22
Hey man I've had this issue come up in the past but I've always been able to fix it doing this exactly! But now it seems to only stop it for about 2 laps of drifting and then it comes right back. It's my day off and I'm just tryna drift man! Lol any help is appreciated :)
Make sure to use 100% (or 99%) isopropyl alcohol to prevent short circuits. Some have only 70% and the rest 30% are water (isopropyl alcohol is non-conductive but water is).
Can I use 70%-91% isopropyl if I am mindful to wipe up the excess fluid left behind with a paper towel?
Just did it and my pedals are working again! Thank you very much for this video!
Amigo,
Valeu demais pelo vídeo! Os pedais voltaram a funcionar normalmente!
💪🏁
This actually worked, brake pedal acted as half a clutch and clutch was not responding at all, squirted some alchohol slammed the pedals and shes new again!
I have an issue where I will be driving in a game and when pressing the accelerator the brake will apply. Often when I let go and apply the accelerator again it will still show brake lights. Checked mapping, all seems fine. It’s not until I touch the brake pedal again that this stops for like 5 minutes. Would you recommend this video for this issue?
Thank you man your a life saver just fixed it for me !!!
this is helpful, i have a prototype racing chassis that has some rough wiring. thanks for the video!
I bought a brand new g29 racing wheel and the clutch aint even giving signals of life, neither the stick, any help?
Thank you very much. I've been looking for this quite long. I got the DFGT instead of the G27 and I thought G27s don't have this issue. I'll try it when I got the time.
Going to check on friday, thanks!
My accelerator is just always on even under braking causing me to longer my braking distance
"braking", it doesn't brake 😂
Hey man I accidentally broke the thing you pushed in on your gas pedal with the black wire any way to fix that?
will this fix the accelerator only going to 90% when pressed down fully?
This one is great i tried with alcohol first time and it was great, but there is second video of guy doing it with WD-40 and yeah second time i clean it with WD-40 and it passes 6 months and still working perfect so this method is great but cleaning potentiometers with wd-40 had better result for me. Cheers great video tho!
I cant control my car in forza ,i have a Logitech g29 ...and even drifting i cant ..can You help me with some settings of tips? Thanks
Thanks for the video! Is it ok to use wd40 to clean the connections instead of using alcohol?
I bought the wd40 electrical verson for computer parts etc. I don't think the normal one would be healthy for this 👍
Greatest tutorial ever. Thank you so much
I finally got this issue after 6 years of use on my g29. Went to go open it up, turns out someone previously put red threadlock on the pedal screws. Could only get two out before absolutely destroying the little hex key and the screw heads. Time for a wheel upgrade I suppose.
you get a new wheel?
It fixed my pedals too. Thanks for the video! :D
I LOVE YOU❤ I was going to sell it but you came in clutch🎉
I appreciate the help but it seems that the potentiometer in the brake pedal itself in my G29 is completely busted and registers input when me and my Dad put it back together. Going to buy a G923 to replace this aging thing as I've had it since early 2018.
I do not recommend buying the g923 as the pedals have potentiometers as well. From experience my g923 pedals started flickering after a few months of use from buying them brand new and I took really good care of them as well. I tried this method on them only for the same issue to come back a couple days later. I do recommend upgrading to load cell or Hall effect pedals since they will offer you more reliability in the long run
@@sevy169 Too late on that. Thankfully my Dad is going to take the G29's pedals and try to replace the potentiometers in them.
Mano se que el video es de hace rato. pero no basta con aplicar alcohol ipopropilico al potenciometro. tienes que limpiar por dentro del pedal la parte del engranaje que se mueve cuando lo pisas. ahi se junta polvo pelusas pelos de mascotas etc. tambien los pasadores de los pedales. y los conos de los pedales. el video sirve de guia esta super bien explicado . tenia ese problema por exceso de pelusones y pelos de mascota pero al limpiar me di cuenta que por dentro del potenciometro hay mucha basura que de seguro tranca el pedal si no lo pisas fuerte. tengo el mismo volante sabes de upgrades o cambio de componentes internos que lo mejoren? y otra pregunta la zona muerta del centro hay forma de corregir para que por ultimo le llegue fuerza?
My peddles are black where yours are red. Does that mean it might be different when I open it up? I don’t want to open it up and mess anything further. I have Logitech G920 for xbox x.
broooo thank you so much 1 try i did not clean and just vacum and then i came to this video and used antibac handgel and it got fixed
ahhhh thank you this fixed it for me. its been bugging me for so long
yooo it works, I have been fighting with this problem a whole year. Thank you my hero
I have one spare which is having issue gonna give it a try
hello thank you for the video can I use some of it in my video?
Is there anything else I can use instead of the alcohol ??
Do you have a link to a video that could help me open the potentiometer as I bought my steering wheeel second hand and I’ve had this problem a lot and I think dust and debris have gotten into potentiometer
the pedals pots are easier to just replace I think
Can I clean it using WD40?
Ok, I did it!!
Thanks very much🎉
some racing game now have pedal calibration setting, which save having a new replacement
Great tutorial! It really helped me!
I don’t have isopropyl alcohol what can I use instead ?
thanks bro i just unscruw back scruws and i clean all the dust from my pedals and bom all workinga.thanks agin
Legend
Magnificent, that's a lot dude. It worked like a charm, I wish I found this video earlier
Thank you for making this video it helped so much!
thanks man finnaly a good tutorial, my pedals work great now thanks😊👍
Was it your brakes. Mine are flickering like hell
Doin the Lord’s work. Thankyou! It works like new now.
Yep! Happy to help :)
Thanks man I had throttle flickering, switched the potentiometer of the clutch as I use the pads shifter. Had tried to clean but the flickering was there, anyway great video
Didn't work for me, followed the instructions.
Cables look good
Lubed it all
Cleaned the dust
Any ideas how to fix it?
The fix work Thanks for the post I improved my lap times by 2 or more seconds per lap great post 5 star post
Thank you!
I was so confused why the car RPM would start jumping up and down then I saw my clutch was the culprit. Now it's good
still helpfull in 2023 bravo
My dog ate my cable 😢 are there replacements available that you of ?
Worked like magic. Thanks dude!
Thank you for saving my pedals!
Got a new T-GT after this problem. Always wanted to fix this pedal problem though. And it looks like my buddy is gonna be racing with me soon :)
Slapped that like button like it owed me money! Thx man!
Edit: It fucken worked! :)
Still working? 😅
@@Stefano-YT yes it is! :)
thanks you i start to be crazy for this problem!
1:07 these nuts on my pedals are rusty any tips on how i can take them off?
This is the exact same thing that’s going on with mine
This is like gas pedal ASMR
i just got my g920 yesterday and im having a problem were it is roughly 40% accelerated always making it impossible to play and if i push down on the accelerator it wont accelerate anymore or any less i was wondering if this is still the same problem
I have this problem with the flickering and the pedals aren’t showing any inputs at all when I press them. Followed your tutorial but it hasn’t worked, is there anything else I can try
Have you found a solution yet? Facing the same issue
Mate, after i cleaned my pedals with connection cleaner my steering wheel began to turn off after connecting the pedals. Any solution?
if theres whater in the cleaner, it may be shorting out the circuit, check for any inverted connectors or short circuits
@@RacingLegendss , Oh, I forgot to make an update in my massage. So, where is a short because the alcohol from the cleaner didn't have time to dry, and then i just turned on the wheel. I fixed it by letting it dry. Anyway, thanks for your guide, it really helped me. Cheers!
There working again I hope 🙏 they stay this way thx brother
If i have my pedal floored it flickers to half throttle hope this works
oh my god it actually worked. thank you so much
Well they’re still just as broken but thanks for the good clear video :)
What should i do if the problem comes back after about a week?
I used electrical contact cleaner and I have done it 3 times with no luck, I may see if they are loose or something like that