ULTIMATE EASY Router Table Build!
Вставка
- Опубліковано 24 тра 2021
- We broke our old router table, so we build this super simple Easy Router Table. This project goes super fast, and is very easy to assemble. With basic joinery and and techniques, a heavy top, and tons of storage, it would make for a great addition to any shop!
BASIC WOODWORKING ROUTER TABLE PLAN - bit.ly/JM_RouterTable2023
NEW ROUTER BUNDLE- SAVE $10 - bit.ly/JM_RouterBundle
SQUIRRELLY STICKS - bit.ly/JM_SquirrellyYT
SPONSORED BY WOODCRAFT - bit.ly/JM2021_Woodcraft
If you like this project you should check out these other shop projects!
- 3 LEVELS of Shop Carts - DIY to PRO Build - • 3 LEVELS of Shop Carts...
- 3 LEVELS of Sawhorses: DIY to PRO Build - • 3 LEVELS of Sawhorses:...
- ULTIMATE Woodworking Workbench Build with INSANE Geared Vices! - • ULTIMATE Woodworking W...
- ULTIMATE Shop Storage Cabinet Build - • ULTIMATE Shop Storage ...
If you love the channel, check these videos out too!
- 5 EPOXY Tips I Wish I Knew As A Beginner! - • 5 EPOXY Tips I Wish I...
- 10 EPOXY Mistakes Beginners Make - • 10 EPOXY Mistakes Begi...
- I Make a Guitar From BULLETS & EPOXY for Mat Best - • I Make a Guitar From B...
MERCHANDISE - shop.johnmalecki.com/
PLANS - www.johnmalecki.com/digital-p...
SAFETY GLASSES - geni.us/4h6xaM (Amazon)
Proudly Supported By:
Woodcraft - bit.ly/JM2021_Woodcraft
Timberland PRO - bit.ly/JM_TimberlandPRO
PIT BOSS - bit.ly/30Q9AeB
Lincoln Electric - bit.ly/JM_Lincoln
MAVERICK ABRASIVES - bit.ly/Maverick_JM. SAVE 10%- CODE: MALECKI10
BITS & BITS - bit.ly/JM-Bits CODE - MALECKI15 = 15% Off
My Top Tools and Product Affiliates
Woodworking Tools - kit.co/JohnMaleckiBuilds/wood...
Metalworking Tools - kit.co/JohnMaleckiBuilds/meta...
Favorite Finishes - kit.co/JohnMaleckiBuilds/fini...
My Camera Gear - kit.co/JohnMaleckiBuilds/came...
#RouterTable #EasyShopProject #BasicWoodworking - Навчання та стиль
You know why this video is great is because we see all your mistake and the fact you didn’t edit them out. It’s just a great reminder that no matter how good we are mistakes do happen. I believe this is what is missing in a lot of wood working videos today as sometime it’s better to see the error yow guys make so we can use that as a guide line for other projects in the future . I love your channel enjoy the build and looking forward for many more like this.
Each video you guys do gets better and better! Very entertaining and not just some boring walkthrough. Keep it up guys. Much love from the UK.
Panhead screws from the backside of the lamination work well for laminations like this. Thanks for the great content!
I really appreciate that you keep doing project videos along with your other stuff. The mix up of all kinds of different content makes this my favorite channel!
Fantastic work on this one!
can't wait to see another one like this.
Thank you
Awesome work, John! Really fantastic looking router table! 😃
Stay safe there with your family! 🖖😊
John is in so much better of a mood now that the kitchen is done. I feel that on a spiritual level.
Very nice video this week boys. Project Turned out very well. Hopefully it gets great use out of it boys. Hopefully more above average coming soon. Keep up the great craftsmanship and hard work boys. Keep Making. Stay Squirrely. God Bless.
It looks extraordinary for being so simple!
I have just started searching for after a router table and this idea, will change everything. The size, cost, the look ,just everything. Great work you guys and thanks for the great content
love your chanel and projects. keep it up 😄
Glad we could help Jonatan
this looks awesome! I've made plenty of mistakes like the backwards bit drawers but it would drive me crazy every time I opened it.
Te quedo muy bueno!!
It's nice to see your Woodpecker tools scratched and used, not just in a case as so many youtubers are!
Nice to watch a pro work so smoothly with such nice results.
having those bit drawers open to the outside instead of the inside where I would be standing would drive me crazy. I love the channel and this won't stop me from watching. Now if only I could get a shop to start playing with wood like you guys.
I'm liking the punch sound effects in the background music.
Awesome build. Thank you for the inspiration for my next two projects: A workbench and a mini kitchen island.
Great build. Love it.
ive used thos draw slides on my work bench, love em
Thank you for this brother! Semper Fidelis!
Great video! Thank you!
Thanks!
Huge fan John love watching your videos
Super Nice Build Brother!
So... Did Jordan quit because he got tired of you throwing him under the bus?
this was awesome and learned a few things... thanks
My ocd can’t handle that the vertical drawers are on the wrong side 😂
or no dust collection... it's flaring up big time
Will definitely ve making this and few other plans you have when I get my workshop back up and going. Just sold my old house and having to put in a new building at my new house, not been able to make anything for months now and about to go crazy lol.
You get me through study hall every Week
HUGE FACTS
Can we please get a "Dammit Jordan" t-shirt? Also is Jordan ok? We haven't seen him in a bit.
Cool router table. Thats my project for the winter comming. Yes, winter IS comming.....
Love the big guy, with the big top spreading all that glue with the tiniest roller I've ever seen!
Sweet build...!!! Thanks for the video...!!! Semper Fi Brother...!!!
Perfect upload timing John. I’m about to start doing basically this but hanging from my table saw wing. Gonna steal some ideas.
an english dude called rag and bone brown recently did one so it could use table saw fence, might be worth a look
Love it!!
That is a great build.
Great content thanks for sharing
youre the coolest person i know.
youre skills are crazy, i really do enjoy your content!
Entertaining build. I appreciate that you understood your audience, knowing (hopefully) that we know which side of the tape measure to read. Also appreciate that you left a goof or two on the video...makes you mortal, and not some perfect woodworking gawd.
The table itself is as good as any I've seen or built. Solid construction, stable materials and my personal choice for tabletop material. I do tend to use shellac for sealer...on all surfaces, top, sides and bottom...using a half-strength wash (equal parts shellac and alcohol) for the first coat, then two more coats straight from the can. Wax hell out of it, and top it off every now and then and that top will last as long as you will.
Great job, crew. Thanks!
I hope “Fix This Build That” Brad sees this video with the clamp trick. He’s gotta be tired of his stuff falling all the time. 😂 You guys and Brad are great. Keep it up. 👍
Those look a lot like KV drawer slides. They're great. Almost as nice as blum, but way less finicky.
Beauty Build Gentlemen!
Nice job!
OMG I need a squirrel-shaped "Stay Squirrely" wood pusher!
I think that it is very impressive, that despite you haven't been a dad for long, you have already mastered the "DAD DANCE"!!!
I haven't had nearly enough "Meat Sweats" this summer. CONGRATS ON THE HOUSE AND OURDOOR OASIS!
It's 'Do you remember the 21st night of SEPTEMBER" yinz!
Thanks @T West!! I was wondering what the heck 21st of DECEMBER was all about, now it makes sense hahahaha!!! :)
Nice project
Great build. When you get your other table fixed. I'll give ya $10 for that one. It looks like it only took you 18 minutes to build but I know casters can get pricey. lol
that is a nice piece! might make me one of those....
Good stuff dude.
Love your videos , can you please tell me how to set up 3 legs on an epoxy table I have made ???measurements an spacing mostly?
I love this! Are you going to put some hardwood trim on the edges of the MDF top to prevent it from getting damaged?
I'm 3 min into the video and all I can say is I love your energy. I can't really concentrate because I'm laughing so hard. Thank you for all the tips and info. ❤😊
If it were me and took the time to make it that nice, I'd have used Formica for the top vice sealing it with water lox. Once its down you'll have a hard slick surface forever.
"its a woodshop" - best quote of the year
Great video - thanks. What kind of router fence/fence mounting hardware did you use?
New shirt idea. "Measure Twice, cut once, cut again." Or, "Measure Twice, cut once, blame Jordan!"
Great build! i want to buy the plans and make one myself but i dont know what parts to buy for the router mount and where?
Johns new father who is getting a lack of sleep is showing. Looks at backwards drawers that could just go on opposite sides and goes eh’ good enough.
If he switched the sides, the drawers would have to be flipped vertically which means he would lose a shelf of bit storage as it would be on the top where there is not enough room...
@@Bward216 just the face
@@MB12116 oh I see what you mean
Actually he did change it for the thumbnail of the video
Watching this on the 21st night of December. I will not forget.
Very good nice
superglue between the masking tape. nice.
I was paying close attention to this build because I didn’t want to Jordan anything up. And then you Jordan’d it up anyway!
My world no longer makes sense.....
2020 has just carried over to 2021, that's how it makes sense haha! :)
@@woodworksbygrampies1284 We aren't really moving on from 2020, we're just counting iterations of it. 2020-1, 2020-2....
Great channel Devil Dog!
You made a Hot Rod reference! I love you
Awesome to see a shop project, seems it had been a while since we'd seen one of these. The end product looks great, though there was a little hiccup during the build - nice recovery there. Is the fence made by Inca?? It's red... is it made by Woodpecker?? That thing looks hefty for a router table. Great video, keep up them coming! Have a good one :D
Nice video bro; Semper Fi!
I am starting to think that Jordan was never the problem....
Great build.
Were you reading my mind!? I was about to build one of these!!
K
Poop
YES. Already subscribed
Those drawers slides look exactly like the ones i make at Knape & Vogt
We finally get to watch John do some actual carpentry and he screws it up like 3 times 😂 Poor Jordan
Good thing is, he is honest about it showing his mistakes. DAMMIT, JOHN!!!
I really want that squirrel push stick ya got there
So I saw you rounded over the edges, is there a reason you decided not to frame the top with some cheap 1inch pine or poplar so the edges hold up better over time?
Awesome! Do you have plans for this on sale?
hey man awesome build! i hope you dont mind me asking, but i was really curious what router bits you would recommend? or maybe even a set that you trust?
I would like to see this video revisited as one of your "Good, Better, Best" videos.
What drawer slides did you use for this project?
What type of red bins do you have for your screws? On the lookout for new bins.
Like your router table. You’re channel was suggested to me by pfwoodturning because I live in Pittsburgh.
Wow you inspire me. Gonna BBQ a whole turkey this weekend. Why you ask.....because freedom!!! You're the best. Please let us know when those " BECAUSE FREEDOM" shirts come out.
How is the finish holding up on the router table. And nice video. Thank you for sharing.
hey man this looks awesome. could I retrofit these plans to cut everything out on my CNC router?
In spite of the comedy and theatre,great build.
Maybe can try to build a bedside table incorporating Knapp joint. I think it will be challenging. 😉
Semper Fi Bro and Merry Christmas
Located in 74 different states...I almost missed that. Love the confidence
I think we need some "Dammit Jordan" merch
Pro tip, never put any supporting pieces ie, blocks or in this case wheels, in the inside bottom panel of the cabinet. Always be sure at least 1/4 of an inch of the 3/4 side panel in on the wheel base.
template for Get Squirly Push Stick? That is Awesome LOL!
Awesome build, to bad you put the router bit slide in backward. My wife pointed it out(not me). lol
When you are standing there to change the bit you have to go around the slide to get the bit.
definitely gonna build this after I'm done with woodworking school 😩😇
New dad woodworking.
Man i have been on UA-cam since UA-cam came out. And ive never subscribed to a single channel. Not until i became a wood carver/turner/burner/builder. And im based out of PA as well. So you my friend are the first lol because of all the things we have in common.... keep up the good work and thanks for popping my cherry, ya f**king jerk haha
Drill press station next? Maybe like Woodshop Junkie?
Awesome video, good ideas, educational, entertaining, funny, great all around. 👍👍
What router bit did you use to cut out the recess for the router lift?
These builds make me so excited to the point where I get gassy! Might have to make this for my shop 👍🏼
in the shop i used the kreg forman
Are we just skipping the fact he said 21st night of December instead of September
a n g e r y
Thank you for this comment haha
Came here to say that