Very nice video, just not ready to build one yet, still on sim. Though as a total beginner I need even more details on the choices you made when buying. Would love to see an extended video cause the way you show it is very nice!!
Thank you! For beginner i would recommend to take any popular BnF drone on the market. They all pretty good these days. Best choice is tiny whoop for sure. You'll get a lot of fun and practice.
nice bro amazing build and amazing soldering the only thing i would change it first to solder the xt60 and motor then fit everything but other than that this is amazing
I think its genius to shield your cables with copper foil against interference. I haven’t seen that anywhere else yet maybe some should tell bardwell about it to make a video. P.S: don’t heat the shrink tube with an open flame its a great way to light your wires on fire rather use a hairdryer or heatgun if you have. most hairdryers should be more than sufficient for most shrink tubes
I have several build videos on my channel. This build video is great. Dig the edit. You did a great job on this video and its impressive sir. Well done Cheers. I liked and subbed up.
what is that xt60 connector called exactly, that you used instead of the one that came on the cable? A link to it would also be great! But great build overall ;)
Hey man nice build. I’m trying to power up the O3 but is not communicating with the fc. A lot of people says that the pins are wrong. But i don’t know how to read the diagram
Best way is to find some local guys and they will help you. Other options is make a post with your problem somewhere in Facebook or Reddit. There is a lot of FPV people there. And don't forget to make some photos and name components. Cause it can be anything
The mount is designed by me and i haven't upload it anywhere. But if you looking for this type of XT60 connector his one called XT60E-M. I bought pack of them on AliExpress some time ago.
I have following doubts, 1. Which motor did you choose 1960KV/2450KV 2. Does the Goku f722 pro is better than Gperc Taker f745 3. Can you please share the part no. of smoke stopper/tester
1. 1960kv with 6s battery and 2450kv for 4s battery. I'm using 6s battery so 1960 my choice 2. I think they both do their job perfect. GOKU has switch on 10 BEC so i can turn off DJI O3 while I'm waiting GPS fix. Less noise and less heat. 3. Smoke stopper is Vifly Short Saver V2
super clean build but I dont recomend the mk5 frame it is not durable at all in my experience. Right after it broke after a minor crash I switched to the speedybee Mario 5 and it has been holding up far better
Thank you! I have completely opposite experience with Mark5 frame. My main freestyle drone is MK5 for the last 1,5 year. I'm not great pilot and i crashed a lot. Tree, ground, concrete. I manage to destroy a lot of props, 2 GPS, few antennas but frame is okay. I have few flight videos on my channel and also video how i clean this drone.
I get it as a kit here: flywoo.net/products/flywoo-fpv-quad-tool-kit-multimeter-solder-iron-w-tool-bag?referral_code=3JBR5K9JK5LC&slt=sales_plugin_af&source_type=sales_plugin_af&srsltid=AfmBOoq6j_yNdDkQNDBVZzub4bZqYHlQ_Cijzjzs9-vkPbvK2JgZ8mKF
Was searching for video to watch before bed and this came up on my fyp. Great Timing!
I was hooked by the straight to the point, visual demo. thank you
Bro the build is so clean
Nice clean build.
Fantastic soldering, bravo!
Very nice video, just not ready to build one yet, still on sim. Though as a total beginner I need even more details on the choices you made when buying. Would love to see an extended video cause the way you show it is very nice!!
Thank you! For beginner i would recommend to take any popular BnF drone on the market. They all pretty good these days. Best choice is tiny whoop for sure. You'll get a lot of fun and practice.
very clean and impressive 🫡 Respect
Nice! About to build my first X frame quad as well with this frame. This helped a lot.
Have fun!
BRO WY IS THIS SOOO CLEAN
Finally a person who doesn’t yap all through the build
nice bro amazing build and amazing soldering the only thing i would change it first to solder the xt60 and motor then fit everything but other than that this is amazing
How does it hold up have you crashed it and please upload some flight footage also can you please share the 3d mounts
I think its genius to shield your cables with copper foil against interference. I haven’t seen that anywhere else yet maybe some should tell bardwell about it to make a video. P.S: don’t heat the shrink tube with an open flame its a great way to light your wires on fire rather use a hairdryer or heatgun if you have. most hairdryers should be more than sufficient for most shrink tubes
Thank you! You’re right about shrink tube. A few time I melted wire a bit. I need to by something better than lighter
for 03 it makes no sense. Its good idea to shield gps in walksnail system, but the way he shielden gps wire ( no connection to ground) make it useless
I have several build videos on my channel. This build video is great. Dig the edit. You did a great job on this video and its impressive sir. Well done Cheers. I liked and subbed up.
Thank you! I appreciate that!
Finally!!!!
Nice video! Just build the Quadmula Djinn 25! Almost the same configuration as yours.
Good choice!
Nice Build and good Video! Hopefully it will get as many views as your “it was satisfying” video
Thank you!
hermoso el drone
ประกอบยากรึปล่าวครับ
Could you do the Pavo pico next cuase I want to get it but a tutorial from your channel I would love it
what is that xt60 connector called exactly, that you used instead of the one that came on the cable? A link to it would also be great! But great build overall ;)
This one called XT60E-M. I bought pack of them on AliExpress some time ago.
👏🏻👏🏻👏🏻
Hey man nice build. I’m trying to power up the O3 but is not communicating with the fc. A lot of people says that the pins are wrong. But i don’t know how to read the diagram
Best way is to find some local guys and they will help you. Other options is make a post with your problem somewhere in Facebook or Reddit. There is a lot of FPV people there. And don't forget to make some photos and name components. Cause it can be anything
Can you please comment the link of the tx60 mount and nice video
The mount is designed by me and i haven't upload it anywhere. But if you looking for this type of XT60 connector his one called XT60E-M. I bought pack of them on AliExpress some time ago.
I have following doubts,
1. Which motor did you choose 1960KV/2450KV
2. Does the Goku f722 pro is better than Gperc Taker f745
3. Can you please share the part no. of smoke stopper/tester
1. 1960kv with 6s battery and 2450kv for 4s battery. I'm using 6s battery so 1960 my choice
2. I think they both do their job perfect. GOKU has switch on 10 BEC so i can turn off DJI O3 while I'm waiting GPS fix. Less noise and less heat.
3. Smoke stopper is Vifly Short Saver V2
@ thanks🤗
The 3d printed parts for the drone, can you pick the color or is it just green?
They have 2 colors - green and orange. You can check it on GepRC website
How much does this set cost?
Around 500eur
super clean build but I dont recomend the mk5 frame it is not durable at all in my experience. Right after it broke after a minor crash I switched to the speedybee Mario 5 and it has been holding up far better
Thank you! I have completely opposite experience with Mark5 frame. My main freestyle drone is MK5 for the last 1,5 year. I'm not great pilot and i crashed a lot. Tree, ground, concrete. I manage to destroy a lot of props, 2 GPS, few antennas but frame is okay. I have few flight videos on my channel and also video how i clean this drone.
how much does it weigh
I haven't weighed it, but I think it weighs about 400 grams without the battery.
What soldering kit are using? wire? iron?
I get it as a kit here:
flywoo.net/products/flywoo-fpv-quad-tool-kit-multimeter-solder-iron-w-tool-bag?referral_code=3JBR5K9JK5LC&slt=sales_plugin_af&source_type=sales_plugin_af&srsltid=AfmBOoq6j_yNdDkQNDBVZzub4bZqYHlQ_Cijzjzs9-vkPbvK2JgZ8mKF
I love the content! wish I had the money to build a drone 🥲
Where do you get your heat shrink from?
I bought it on AliExpress. I think you can find it in local stores
Where i cant buy the kit
You can buy ready to fly drone or buy it separately on GepRC website. The links is in the description
wahst the cheapest fpv drone o n amazon for 200$ prebuilt and comes witha controller
I think you need to check BetaFPV Cetus Pro - cheapest option i think
whats is the total price ?
Around 450 eur
how much for all of it
It is about 500-600 eur
Hm cost??
500-600eur
Can’t stand ASMR. Just build it. I don’t care what the package sounds like.
En serio me veo todo el video y solo muestra un vuelo de 4 segundos???
This video is about building the quad. I decided not to put flight footage here.
I am a FPV fan but don't have any drone😔
Please give away it to me🤣
Better use gloves
lol why
less feelings
Is this to avoid short circuits or my hands simply disgusting?