👏👏Thanks for that support! The screw set is extremely durable with this kit. Best part is you'll be able to replace the arms if needed by just that one screw.
Hola felicitarte con tu video porque es sencillo directo y de facil comprension para alguien novato como yo en este hobby.....te queria preguntar como podria utilizar o configurar en PNP para aproechar mi fpv controller2? me suscribo a tu canal ,gracias.
Excellent build, but it seems like the GPS should have a clear line of sight with the sky, and also the LED wires on the bottom and the LED lights themselves are going to get destroyed.
how did you setup betaflight and blheli for the mamba stack and the motors ? also are you running the motors at slow speed when you are doing the hover test in home ? If you do a bit more detailed video on how you setup the software side of things for this exact setup that would be helpful.
It’ll be a beast when you do ! Right in the middle of ESC and FC, the shield will help where most interference is. TBS receivers are what got me started, when I tried ELRS, WOW I felt more live with the quad. Very responsive but not snappy and my flow if there was any, haha was easier to get into. Packet rate is way higher. Module are coming out with up to 1w in power bringing it up for longer range. Thanks for the question!
Hi mate, I wonder if the GPS under the O3 camera has ever given you a GPS fix? I would definiyely move it on the top (maybe linked to a battwry strap).
surprisingly well, the end of the video shows sats getting picked up right away but I cut off the video pretty quick. I also mention in the description that it was relocated to the top, when the weather clears up that should be a great time to test how well it holds those sats.
Watching 'till end is so satisfying. 🤩🤩🤩. Building one soon 😁😁😁
👏👏Thanks for that support! The screw set is extremely durable with this kit. Best part is you'll be able to replace the arms if needed by just that one screw.
Nice clean solder 👍🏼
Thanks for the comment 💪 TBS solder offers a good lead to flux ratio
NICE VIDEO NICE BUILD . TOTAL COST PLEASE ?
Beautiful quad
Great Job. Nice build 🙌🏽🙌🏽
🙏🙏 Much appreciated, thank you for watching and commenting. I was planning on flying outside but we been blessed some rain, which I don't mind at all.
Exelente trabajo amigo y un saludo respetuoso para usted.
Nice build! However one trip into tree branches and Those exposed LED wires would get shredded
nice build, Thanks for the video!
Hola felicitarte con tu video porque es sencillo directo y de facil comprension para alguien novato como yo en este hobby.....te queria preguntar como podria utilizar o configurar en PNP para aproechar mi fpv controller2? me suscribo a tu canal ,gracias.
Excellent build, but it seems like the GPS should have a clear line of sight with the sky, and also the LED wires on the bottom and the LED lights themselves are going to get destroyed.
GPS is on top of the quad and the wires have survived plenty of crashes in trees already. I’m guessing they are low profile to the frame and luck
Great job 👏, how did you wire up the buzzer, it has three wire ryt, and you have connected gnd to tx ? And how did you configure on BF.
Absolutely next level bro!!!
Hey Nice Job. Please tell me do you have an issue with the OSD with your Mamba Stack and the DJI O3
Awesome video! Mind if I ask the total cost to build this? I want to do my first
Great content
Thanks! 💪
Woaaahhh LEDSSS
👽👽Programable to various colors, all primary colors for sure and the settings can be changed to work with a switch on your transmitter.
how did you setup betaflight and blheli for the mamba stack and the motors ? also are you running the motors at slow speed when you are doing the hover test in home ? If you do a bit more detailed video on how you setup the software side of things for this exact setup that would be helpful.
I have the same stack you do but have not build my quad yet. Does the ESC go shield up or down or does it matter? How do you like expresslrs?
It’ll be a beast when you do ! Right in the middle of ESC and FC, the shield will help where most interference is. TBS receivers are what got me started, when I tried ELRS, WOW I felt more live with the quad. Very responsive but not snappy and my flow if there was any, haha was easier to get into. Packet rate is way higher. Module are coming out with up to 1w in power bringing it up for longer range. Thanks for the question!
Might be a stupid question but can it hold a GoPro?
Yes! I’ve been flying it recently has a super strong punch to it 👍
Very nice job on the build and video production. The last song is by what artist? New Sub also.
- What amount of solder do you need to build a quad?
- YES
🤓
Hi mate, I wonder if the GPS under the O3 camera has ever given you a GPS fix? I would definiyely move it on the top (maybe linked to a battwry strap).
Is this mamba stack which is used in this build is good one ?
Does the gps antenna work fine at this position without free view ?
whats the thing under the heat shrink called
Motor wire protector , I buy it on Pyrodrone.com
18:54 whats that tool you are using to hold your motor as you tighten the prop nut on top ?
How well does the GPS work inside the frame like that?
surprisingly well, the end of the video shows sats getting picked up right away but I cut off the video pretty quick. I also mention in the description that it was relocated to the top, when the weather clears up that should be a great time to test how well it holds those sats.
Speedy bee has plug in LEDs
Yes they do! But I couldn’t find any in stock that have a continuous input for a series of LEDS
You could save a few grams on motors wiring
This isn’t a build where weight is a big deal.
Will it be able to hold gopro 9?
Oh yeah it can! They included a 3D printed mount
build Rx ELRS but take off with TBS :)))
Trump/Tulsi 2024
😂😂😂😂 ❤
Hey man do you sell these by chance? If you dont you should. And if you do HMU with a price on this build complete BNF(bind and fly)
Would be interesting to put up for sale, I will let you know! thank you 🦾