Very good video. I prefer the relative color value. This way the running sequence is not turned off and I can use multiple temp buttons for the different directions the bump runs from.
Thank you for all your UA-cam Videos. Highly appreciated. Could you also make a tutorial how to ignite (discharge lamps) fixtures like Martin Macs remotely via MA3? Cheers
Which Martin Macs? For example with a Martin Mac 700 profile here's how you do it: Select the fixture > Beam Attribube > Shutter > Set to "91" or "Lamp On". Clear progrmamer, wait a moment for it to strike. Some lights have Lamp On located in the control channel, some in shutter, some even in dimmer curve. Consult the manual for each fixture accordingly if required.
@@Event-Lighting amazing thanks! Strange question but what would the syntax look like for that on an MA 2. I’ve tried it out but I can’t quite get it to work
Creating a sequence like this but using Recipes within the cue is more powerful. You can then make changes to multiple cues with a quick change to a MA Tricks pool. Very well explained tutorial keep them coming 👍🏼
I want the same thing but i want to make it a "flash type button" that i can hold If i release the button i want cue 2 to fire in this case, is that posible? Keep up doing the great work you do!
There's actually a more simple way to do this using a temp button. Using a temp button will also let you use the fade times set for the cue. as well, you can make a stack of colors, and change the reset for playback to "current cue". for example, I have a stack of colors, I use the "go to" command to pick a color cue, and then I can use that for my bump color.
Is there a way to do that with a temp button ? This would help me having the release whenever I want it without having to update the trig time everytime I want it to change.
I used it as a temp button, turned off tracking, gave it low priority and it kinda worked. Still new to ma, so no idea if it's an efficient way of doing it but it worked for me.
@@piminat0r Idk what tracking has to do with it ? What you have still depends of the trig time of the second cue. What I want is to disable it / not have it and having the release of my temp being the release of the fx. So far, if you disable the second cue, it just snaps release (as it's supposed to be, unless you have fade/delay in the offcue).
Very nice video, keep doing more !
Very good video.
I prefer the relative color value. This way the running sequence is not turned off and I can use multiple temp buttons for the different directions the bump runs from.
Thats the cool thing about MA, you can do it just the way you like it 😀 Thanks for watching and commenting 👍👍
Thanks, ive been doing this very wrong with about 10 extra steps😅
Thanks!
Best Chanel 👍💯💯💯 😊
Thanks Dommy 😀🙏
Thank you for all your UA-cam Videos. Highly appreciated. Could you also make a tutorial how to ignite (discharge lamps) fixtures like Martin Macs remotely via MA3?
Cheers
Which Martin Macs? For example with a Martin Mac 700 profile here's how you do it:
Select the fixture > Beam Attribube > Shutter > Set to "91" or "Lamp On".
Clear progrmamer, wait a moment for it to strike.
Some lights have Lamp On located in the control channel, some in shutter, some even in dimmer curve. Consult the manual for each fixture accordingly if required.
Second cue release set .I think same effect will get
Yes :-)
Thanks so much for this! At 5:35 if in MAtricks and wings of two would it sweep into the middle?
Yes it would 😀
@@Event-Lighting amazing thanks! Strange question but what would the syntax look like for that on an MA 2. I’ve tried it out but I can’t quite get it to work
How would I do this to start in the centre and go to the outsides.
2 pipes with 7 auras each
Creating a sequence like this but using Recipes within the cue is more powerful. You can then make changes to multiple cues with a quick change to a MA Tricks pool.
Very well explained tutorial keep them coming 👍🏼
How do you do the release part with recipes ?
@@DTRE_Torak You can store the color release values in a preset and reference it in the recipe
@@checkitup2004 thanks, but in a year span I figured it out haha
I want the same thing but i want to make it a "flash type button" that i can hold
If i release the button i want cue 2 to fire in this case, is that posible?
Keep up doing the great work you do!
I think thats a little more comlicated than that - i will explore that when i get the chance - Skiing with my family this week :-)
@@Event-Lighting have fun!
Can the new "offcue" feature be used for this? With a temp button.
There's actually a more simple way to do this using a temp button. Using a temp button will also let you use the fade times set for the cue. as well, you can make a stack of colors, and change the reset for playback to "current cue". for example, I have a stack of colors, I use the "go to" command to pick a color cue, and then I can use that for my bump color.
@@jakebylsma7641 I have the same question. I`ll try it.
Is there a way to do that with a temp button ? This would help me having the release whenever I want it without having to update the trig time everytime I want it to change.
I used it as a temp button, turned off tracking, gave it low priority and it kinda worked.
Still new to ma, so no idea if it's an efficient way of doing it but it worked for me.
@@piminat0r Idk what tracking has to do with it ? What you have still depends of the trig time of the second cue. What I want is to disable it / not have it and having the release of my temp being the release of the fx. So far, if you disable the second cue, it just snaps release (as it's supposed to be, unless you have fade/delay in the offcue).
ty