Great job! Note that "adaptive contrast" is only relevant for the automatic mesh generation. It will not do anything for the uniform mesh. Other than that very nice training.
bruh I appreciate this video so much! A helpful tip for you, when you use sound effects like the glitch SFX. Make sure that its a lot lower than your voice. I personally aim for -15 to -20 depending on how the file was recorded. This will add to your video while not scaring people with the abrupt sound effect. I hope this doesn't come off bad. I just want to help if possible :)
Hello sir,,, I am trying too many to track using meshwrap but it's dosn't work. The many problem is when I import track in after effect,,, the track don't move. Please help
@@vfxworldrsb This not bug,, l am sure because the system is formatted yesterday and then I tried that. Can I send you video what kind of problem I am facing???
hi bro, thnx for video. When I try to place a label on a moving elliptical object, click generate mesh and click track, and after a few seconds the dots enter each other and the dots move outside the elliptical object. What can I do for this in Powermesh. Thanks for your answer
Did the tutorial to the "T". After tracking for about 10 minutes and saving, when I went back to AE it crashed and I lost everything. I hope they stabilize their application, soon. Both Boris and Adobe.
@vfx world please help, i installed mocha pro 2021 seperately but in after effects its showing the older version of mocha and i am using after effects 2021..please help..🙏
i followed everything exactly, but when i precomposed and put the tatoos in the clean plate and turn of the reference frame, nothing shows on the body of the man in the main composition. kindly guide. thanks
@@pierre.a5324 i found the solution, you need to render the clip, dont use the actual cutting from dynamic link, render the clip and it have his own duration, i think this is bug of duration that make the cutting clip miss match
@@Wahyuvisual thank you for your fast response. Yeah I think it’s a bug because if I do not trim the clip before working on it everything works fine .So I will just trim it before launching AE.
@@pierre.a5324 no problem man, i hope u understand my word, because English ia not my main laguange, i try my best, here the simple solution,if you want the tracking work you need to make that tracking clip has been cutted and rendered as a solid clean clip, not a cutting clip like you cut with razor tool in premier and do dynamic link with ae, you need to render that clean cut, even in my case pre comp doesn't work if you trying not to render because lazy to render, hope that work ☺️
Great tutorial these is really nice thanks for these everything that's amazed ..Also how to show alpha and add blur in rotoscoping in mocha pro? How to install ofx for borris fx mocha pro 2021 in Nuke x?? Any cool tip please
Heads up that the step to Stabilize with Unwarp, inside Mocha Pro is unnecessary. You can simply go to AE and then select Render -> Stabilize: Warp and you should be good to go!
Very nice tutorial.. Loved it.. Can you help with one thing, after installing Mocha Pro 2021 its not showing the option #mocha pro in after effect timeline.. How to active that?
I noticed this has been asked several times before but there is no solution. Can you PLEASE explain in a comment or a very brief tutorial how to setup the nodes to get powermesh working in Davinci Resolve. Iam working with powermesh happily in After Effects but can not get the nodes figured out to get it done in Davinci Resolve. I know its simple but nobody has explained it in a brief step by step way. Thank You very much :)
Very nice tutorial. Can you make the same thing for the premiere pro? I can do it with after effects as you have shown here, but I got stuck with how to do that with premiere pro without after effects.
Can you please do one on mocha pro that I can import camera and bulls from data on mocha pro cause when I try to get the camera data I can't find past camera data in after effects
If you are pasting 3D camera track from Mocha Pro into AE, then you need this free plugin: borisfx.com/downloads/?&product=Mocha%203D%20Track%20Importer
@@vfxworldrsb please help, i installed mocha pro 2021 seperately but in after effects its showing the older version of mocha and i am using after effects 2021..please help..🙏
@@vfxworldrsb I fixed problem. I have cracked mocha and by this,texture starting on the random frame,so I need to find the frame,when I started tracking and find the starting frame of animation texture and on the timeline compare both elements
Great job! Note that "adaptive contrast" is only relevant for the automatic mesh generation. It will not do anything for the uniform mesh. Other than that very nice training.
Uff Rajat bro is pride of Indian vfx content creators
Is it free
@@IslamicStorytimez I'm afraid not, but there's a free version built in after effects called "Mocha ae" which is the lite version of mocha pro
Thanks so much bro tumne aache se bataya Maine kitne sare tutorial dekhe but thumara sabse best aur helpfull nikla
Thanks ❤❤❤❤
Единственный нормальный и понятный туториал. И не важно,что на ломаном английском. Все четко и по факту обьяснил! GREAT JOB MAN,I LOVE YOU!!!
thank you so much
bruh I appreciate this video so much! A helpful tip for you, when you use sound effects like the glitch SFX. Make sure that its a lot lower than your voice. I personally aim for -15 to -20 depending on how the file was recorded. This will add to your video while not scaring people with the abrupt sound effect. I hope this doesn't come off bad. I just want to help if possible :)
yeah the glitch transition was a bit too loud for me too
Мой любимый индус озвучивает))) Английский тяжело понимать но индусский английский идеальный )
Really Awesome Video
I'm Fallen in love with this tutorial of afte effect
Thanks for the compliments
Mesh is awesome, lot's of potential uses.
Thanks for the compliments
May I Ask what to press for rotating image like you rotating tattoo to adjust
Awsome bro & Is it inbuilt plugin or we need to download & install it separately?
I keep doing this over and over and it never tracks it just sits still
Bhai mujhe aftereffects chalana bhi nhi aata bss aapki video dekhkr mja aaya😁
Hello sir,,, I am trying too many to track using meshwrap but it's dosn't work. The many problem is when I import track in after effect,,, the track don't move. Please help
May be it's a bug ...i am not sure what exactly happened with your product
@@vfxworldrsb This not bug,, l am sure because the system is formatted yesterday and then I tried that. Can I send you video what kind of problem I am facing???
hi bro, thnx for video. When I try to place a label on a moving elliptical object, click generate mesh and click track, and after a few seconds the dots enter each other and the dots move outside the elliptical object. What can I do for this in Powermesh. Thanks for your answer
Check any light is changing or not
@@vfxworldrsb i will try it, thank you.
Did the tutorial to the "T". After tracking for about 10 minutes and saving, when I went back to AE it crashed and I lost everything. I hope they stabilize their application, soon. Both Boris and Adobe.
Thank you! Well presented tutorial, sub'ed!!!
Thanks for the feedback
@vfx world please help, i installed mocha pro 2021 seperately but in after effects its showing the older version of mocha and i am using after effects 2021..please help..🙏
This is a bug.. I am also facing same issues.. Wait for next update
@@vfxworldrsb please share the plugin activation key it will be very much helpfull..
Thank you
thanks bro it was really helping.
i followed everything exactly,
but when i precomposed and put the tatoos in the clean plate and turn of the reference frame, nothing shows on the body of the man in the main composition.
kindly guide.
thanks
It’s very helpful ❤
I'm so glad!
Sir! I followed exactly how you did it. But my object is not sticking to the subject. Plz plz help me sir 🙏
ya me too same problemn
any solution ?
@@pierre.a5324 i found the solution, you need to render the clip, dont use the actual cutting from dynamic link, render the clip and it have his own duration, i think this is bug of duration that make the cutting clip miss match
@@Wahyuvisual thank you for your fast response. Yeah I think it’s a bug because if I do not trim the clip before working on it everything works fine .So I will just trim it before launching AE.
@@pierre.a5324 no problem man, i hope u understand my word, because English ia not my main laguange, i try my best, here the simple solution,if you want the tracking work you need to make that tracking clip has been cutted and rendered as a solid clean clip, not a cutting clip like you cut with razor tool in premier and do dynamic link with ae, you need to render that clean cut, even in my case pre comp doesn't work if you trying not to render because lazy to render, hope that work ☺️
thank you !!!
Welcome
Great, Waiting for this tutorial
Thanks for the compliments
I noticed that your spline wasn't too intricate as far as the shape of bezier. Does it need to be intricate?
bro y apne mocha 2021 AE 2020 m kese install kia plzz btao bhot prob. ari h krne m
Great tutorial these is really nice thanks for these everything that's amazed ..Also how to show alpha and add blur in rotoscoping in mocha pro? How to install ofx
for borris fx mocha pro 2021 in Nuke x?? Any cool tip please
Really magic
some options are not showing in my Moca Pro Software like mesh and other options plz help me.
Heads up that the step to Stabilize with Unwarp, inside Mocha Pro is unnecessary. You can simply go to AE and then select Render -> Stabilize: Warp and you should be good to go!
I failed to understand how did you get that PNG?
Google
@@vfxworldrsb I meant into the Project, as you did't show that in the begining.
nice video! thank you! could this be used to attach CG objects i.e helmets or weapons to an actor please? using alembic?
how did you make the refernce frame?
Its just normal
@@vfxworldrsb I'm new to ae so idk what normal is haha 😅
Very nice tutorial.. Loved it.. Can you help with one thing, after installing Mocha Pro 2021 its not showing the option #mocha pro in after effect timeline.. How to active that?
Let me check
how do you remove a tattoo with mocha? is it possible?
Try using content aware fill and apply it to your track
Not working aaaaah!!! It drives me crazy... the last result my video is stratching following the warp ://////
Cool 😎
Great work!!
Kindly show us tattoo placement in nuke!!
Bro please also give project file of each video please bhai btw love you and one question is there why videocopilent is not active
Okayyy
can we do this in Premiere pro too?
I noticed this has been asked several times before but there is no solution. Can you PLEASE explain in a comment or a very brief tutorial how to setup the nodes to get powermesh working in Davinci Resolve. Iam working with powermesh happily in After Effects but can not get the nodes figured out to get it done in Davinci Resolve. I know its simple but nobody has explained it in a brief step by step way. Thank You very much :)
Super bhai
Thanks
Very nice tutorial. Can you make the same thing for the premiere pro? I can do it with after effects as you have shown here, but I got stuck with how to do that with premiere pro without after effects.
you can just make it with after effects then put the after effects to the premiere pro
에프터 이펙츠 에 만든거 프리미어에 넣면 됩니다
Nice
Thanks for the compliments
Can you please do one on mocha pro that I can import camera and bulls from data on mocha pro cause when I try to get the camera data I can't find past camera data in after effects
If you are pasting 3D camera track from Mocha Pro into AE, then you need this free plugin: borisfx.com/downloads/?&product=Mocha%203D%20Track%20Importer
Mokapro after effect 2017 m chalega sir
Yes definitely
how did u uploaded the rendered files into AE ? i couldn't find thim else broo
type that into google and you'll find it.
bro my image is not sticking to the track why????
Tracking issue
nice work
Thank you! Cheers!
🔥
can u show how to download crack version of mocha pro 2021 adobe plugin ?
360 rotation me kaise kare
NOT WORK SIR please HELP
But I cant install to my after effect
my proplem , applying mocha pro from after effect " apply matte ,? COPY AND PASTE ? no fonctionn my tes , shit
Man this is too hard to watch, I need to swap tab because I don't like anyone seeing me looking at Muscular man.
Green screen point track ka btao sir
Ok brother
@@vfxworldrsb thanks bro please waiting for all detail chorome point trackr
Shot link pettu bro
Mocha pro 2021 not showing in after effects
mocha pro 2021 is not provided on AE, you have to install mocha separately
@@vfxworldrsb please help, i installed mocha pro 2021 seperately but in after effects its showing the older version of mocha and i am using after effects 2021..please help..🙏
Not working
Doesn't working..
Why?
@@vfxworldrsb I fixed problem. I have cracked mocha and by this,texture starting on the random frame,so I need to find the frame,when I started tracking and find the starting frame of animation texture and on the timeline compare both elements
Uploaded more places
Ok
Everyone getting good output but myself worst why this fucking tool was so tough to me 😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭
Please someone help tracking is not working for me
while im copy and paste on clean plate its not working
Upload blender