How to Replace Spark Plugs 2011-2018 RAM 1500 (3.6L V6)
Вставка
- Опубліковано 7 лют 2025
- Buy Now!
New Spark Plug Set from 1AAuto.com 1aau.to/ic/1AET...
This video shows you how to install new spark plugs on your 2011-2018 RAM 1500 3.6L V6. Spark is one of the four required components for an internal combustion engine to run. If your spark plugs are failing, worn, or dirty, you may experience rough starts, rough idle, poor performance, or poor mileage.
This repair was done on a 2016 Ram 1500 SLT 3.6L Crew Cab Pickup 4-Door 4WD Automatic and the process should be similar on the following vehicles:
2011 Ram 1500
2012 Ram 1500
2013 Ram 1500
2014 Ram 1500
2015 Ram 1500
2016 Ram 1500
2017 Ram 1500
2018 Ram 1500
🔧 List of tools used:
• 10mm Wrench 1aau.to/o9h/1AX...
• 10mm Socket 1aau.to/obzc/1A...
• 8mm Socket 1aau.to/obzc/1A...
• Air Blow Gun
• Air Compressor
• 1/2 Inch Ratchet 1aau.to/oayr/1A...
• 1/4 Inch Ratchet 1aau.to/obzc/1A...
• 3/8 Inch Drive Ratchet 1aau.to/obV2/1A...
• Torque Wrench 1aau.to/oa3A/1A...
• Gloves 1aau.to/oaNW/1A...
• Safety Glasses
Subscribe: / @1aauto
Check out our playlist:
Ram 1500 3rd Generation 2011-2018: • Ram 1500 3rd Generatio...
For More Info visit us at 1aau.to/h/fGZ/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Visit-1AAuto
√ Do it Yourself
√ Save Money
This video convinced me to bring it to the shop. 😂 Ain't nobody got time for that.
Kept waiting for, and last of all, remove engine mounts and remove engine.
Great video - easy to follow. Took this neophyte 2 hours to finish, but well worth the time. Can't imaging what I would have had to pay a shop to do this.
Imagine - stupid fat fingering
Great video! Just replaced these with my dad following your instructions. Huge help.
Everyone is a critic and knows more. Yet they didn't make a video to help people out.
If you need a person to hold your hand & break down verbal commands as if your a child. I " strongly recommend " you don't DIY this. Pay to have it done.
Thanks for the video.
A great video looks easy enough. The shop gave me an outrageous quote to replace plugs
awesome video. this will get more views soon. all these rams about to need replacement plugs. lol
Thanks!
Awesome Dodge Videos, keep it up! Thanks guys
What a wonderful video, very accurate, step by step manual even for those who never touched the wrench. Thanks so much and good luck. 👍
Wow, what happened to just pulling the boots off the plugs and taking out a spark plug? What a PIA this looks like. throwing P0304 #4 cylinder code for plug and/or coil.....not looking forward to this debacle to dissemble for what should take 5 minutes on a normal older vehicle....So how long is the process for a typical billed change? Looks worth it to have if its only 1 hour charge.
Thank you for this helpful step-by-step video.
Thank you!
Thanks for the video.. my son and i just replace spark plugs and coils on my ram 1500 just watching your video..thanks a lot.
this hose that hose is really confusing. please try to be little specific next time like coolant hose, fuel hose and also the reason why are we disconnecting them. and same for the bolts, "loosen these 8mm bolts on left of the alternator" will be more helpful
Should I replace the coils on each one?
What about gaps? How do I make sure the plus have the right gap?
They make some real complicated junk these days if you ask me.
I did exactly that and now I have. A heck engine light and the truck idles a bit more than usual. It’s a misfire but what did I do wrong. I know the plugs are correct because I wouldn’t have been able to screw them all the way in. Any thoughts will help.
So no coolant runs through the intake cool got it, thanks.
Is it recommended to replace the gaskets for intake?
Is this video applicable at all to the 2019?
Really need to zoom out to see where the heck you're working
Sheesh! "Remove cover.....remove throttle body.....remove intake manifold....drain coolant.....remove crankshaft and pistons......remove left door.....remove dash and instrument cluster......remove headliner.....remove back glass.......remove fuel tank.......remove license plates and license lamp bulbs.....and finally, remove the passenger rear brake caliper and rotor."
We get it, Dodge. We get it. "A + purple = barbecued flavored lugnut toast"
Well explain, thank you!
Bro I just wanted to change plugs not coils
I would of done the spark plugs on my 76 Chevy already
looking for another video. why not just say start taking off things until you can see the spark plug. It would be about as clear as what the video showed
"You can see right underneath. Push that" *is completely blocked by hand*.
I think it’s a 3.7 or atleast my 12’ is
Ridiculous amount of work to just change spark plugs. Designed to discourage the home mechanic to do maintenance work on a work truck.
You have one out there replacing the coils you should have just did a double single video when replacing coil show us how to get a spark plugs all in one.
Once again should have used the V8
Ram was already suffering incompetent engineering
Labor equals $