I have the same headlight as the red dyna , I was sent the MEB9892 extension block which does not seem to line up with the headlight. I’ve been trying to get answers out of customer service but not hearing back.
just purchase memphis shade for my 08 suzuki boulevard C90T the instructions was send with kit are kind hard to figure out , anybody know any complete step by step mounting instructions [ video or audio].Thank you
Hi Philipp I am just buying a windshield. It is a pain in the ass. These video's make it sound easy it is NOT easy. It is only easy for people that live in the USA for all other people in the world it is back and forward to eBay until you get one that will fit. I ended up getting one that came close and then I altered the mounts my self to get a good fit.
7316bobe i ended up buying a 1/4 Fairing with a Laminar Lip. No measuring for that badboy. But now I have a similar problem with my riser and handlebar setup. 9.5” riser but do I take a low bend (12” rise total) or medium bend bar (13.5” rise total). I’ll never now. All I can do is order and cross fingers
i'll just measure my nose to the ground while sitting on the seat. then i will transfer that to the front of the bike and allow 3/4 of an inch above the headlight. simple math will quickly give me the windshield height and i will not need any assistance in doing so.
I got a rio grande on my dyna. It’s a little too tall and would like to angle it backwards (toward me). That being said how do you angle it back? If I loosen only the top clamp and rotate it backwards the bracket gets pulled out of the bottom clamps
These video's make it sound easy but it is NOT easy. Kennedy said we aim to go to the moon not because it is easy but because it is hard. Well harder than going to the moon is trying to buy and fit a windshield that does the job and does not look like a piece of crap stuck on the front of the motorcycle.
How do I size up if I have Memphis shades Road warrior?
But how do I decide which one of your windshield heights I need without the measuring guide windshield used in this video?
I have the same headlight as the red dyna , I was sent the MEB9892 extension block which does not seem to line up with the headlight. I’ve been trying to get answers out of customer service but not hearing back.
just purchase memphis shade for my 08 suzuki boulevard C90T the instructions was send with kit are kind hard to figure out , anybody know any complete step by step mounting instructions [ video or audio].Thank you
Do i take the measurement with the headlight extension block already mounted or with the stock headlight positioning? Asking for my FXDL
Hi Philipp I am just buying a windshield. It is a pain in the ass. These video's make it sound easy it is NOT easy. It is only easy for people that live in the USA for all other people in the world it is back and forward to eBay until you get one that will fit. I ended up getting one that came close and then I altered the mounts my self to get a good fit.
7316bobe i ended up buying a 1/4 Fairing with a Laminar Lip. No measuring for that badboy. But now I have a similar problem with my riser and handlebar setup. 9.5” riser but do I take a low bend (12” rise total) or medium bend bar (13.5” rise total). I’ll never now. All I can do is order and cross fingers
What to do when the Road King windshield fastener doesn't hold?
i'll just measure my nose to the ground while sitting on the seat. then i will transfer that to the front of the bike and allow 3/4 of an inch above the headlight. simple math will quickly give me the windshield height and i will not need any assistance in doing so.
I got a rio grande on my dyna. It’s a little too tall and would like to angle it backwards (toward me). That being said how do you angle it back? If I loosen only the top clamp and rotate it backwards the bracket gets pulled out of the bottom clamps
What if we got one way too tall?
I'm a 6f how tall r u or ur friend Matt ? so u chose 17in or 18in?
I chose 17in
You should put a small pad under the sizer so you don't have to stick your finger under it.
But then I like easy because I am lazy
Can u send me a sizing guide !
Very useful indeed.
matt is shy
Have you ever wondered what windshield is best for you? We help eliminate the guess work with this video!
#DIY #MotorcycleParts #cruiser_motorcycles
I should see this video before buying 😂😂😂 Too late
These video's make it sound easy but it is NOT easy. Kennedy said we aim to go to the moon not because it is easy but because it is hard. Well harder than going to the moon is trying to buy and fit a windshield that does the job and does not look like a piece of crap stuck on the front of the motorcycle.