@@iuppiterzeus9663 You just need the BMW cable, which I ordered on amazon for 30 EUR And BMW standard tools software, I got it from bimmer geeks website, but it seems germans did a german thing a decided to be super not cool about it and forced them to pull it down. I got it on an ooold notebook somewhere who knows where, sorrz, but it must be on the intranets somewhere or on some warz site.
Thanks for making this video. Quick question regarding the chasis selection . I have a 2009 5dr hatchback 116i (E87) and noticed in your video when selecting chasis it doesn't show E87 (it skips from E85 to E89). Does this mean it won't work on E87?
Hi, I'm very happy to hear that my information helps you. Regarding your question, for E87 you need to select E89. E89 is for (E81, E82, E84, E87, E88, E89, E90, E91, E92, E93). So in conclusion will work also for your car. 😊
Great video, exactly what I need to do. This is the first time I use NCS Express, when I try to select FRM I get an error (COAPI-2000). But, when I select CAS it loads the VIM properly. Is there anything I must do to be able to access the FRM? Thanks!!
Hi, thanks for your comment, there is no special thinks which need to be done to access FRM, should work similarly with CAS, please check if you cable is set on D-CAN or on K-CAN (if you have a switch there in cable). Please check if something from here can help you www.bimmerfest.com/threads/ncs-expert-vin-is-faulty-error-please-help.1400175/
Also didn’t have the same profiles as you in NCS EXPERT (0:37 time) I added the 01.expertenmode_ver_3.0.pfl but get the error while trying to launch it “prufsumme falsch!” Even if I use another profile, the “Start” option on F1 doesn’t show. Instead “FG/ZCS/FA shows (0:41) And if I were to choose “Chassi” that shows up in F2, and choosing car model, no FRM options shows up. Are my files correctly installed?
Is not mandatory to have there FRM, also is ok if you have any module with "expert" in name, if you don't have FRM, you can select CAS, or something else, this selection is used only to take some coding information about the car 😀
@@BMWEMS thanks for a quick reply! In my NCS expert I can load profiles, but after that my F1 button doesn’t change to “start”. But “chassi” appears, and after choosing my chassi, no other pop up window appears, where I can choose ECU (Cas, frm or nrfm). So I can’t continue; l can not “process ECU” and search for the radio module. Is my NCS EXPERT set up as it should?
Try to reinstall ncs expert, download standard tool from here : www.bimmergeeks.net/downloads and inside the archive there are some instructions about how to install this tools 😀
Hi so i have the Problem now that i cant find after "choose ECU" the 1Rad module There is just: 43BMO, ABG, CAS, DSC, FRM, FZD, IHK, JBBF, KOMBI So what is my Problem? 😅
Hi I have pre lift ‘99 e46 with business cd from 2004 supporting aux that I installed but when I connect my car to ncs expert there is no RAD module so I can’t program the aux, can you help me?
Hi, I do not have experience with updating one of the car modules yet, but I assume what can help you. I assume somehow you need to update the year of the car using NCS expert and from what I know you have 2 modules where the year is stored (you can search on Google how to do this, I didn't do this until now, so I do not know exactly the procedure) and if you have a new RAD module from an 2004 car, I assume you need to change the yer at 2004. I sow somebody doing this with an e60 or e90 with an FRM module, I can't remember exactly now. You ca try this, and after changing the yer I assume the car will be capabile to identify this new RAD. Is just an assumption, maybe you can read also on forums other opinions. 😊
Hi, I knew at some point that you can reset ECU by flashing an empty .MAN file, but if somethink like this is not working please try this (I found this on a forum): 1. Load NCSExpert. 2. Load Profile and select Expertmode 3. F1 (VIN/ZCS/FA) 4. F3 (ZCS/FA f .ECU) 5. Choose E89 (for the E9X) 6. Select CAS 7. F6 (BACK) 8. F4 (Process ECU) 9. Select the Module I want to Revert back to Stock. 10. F2->Choose "SG_Codieren->ok 11. F3->to start coding the ecu with factory settings according to the vehicle VO.
I have this same issue, if I was to buy a professional HU and swap my business cd with the new one would I still have to do this? Or would it fix the problem?
Hi, this depends by your new Radio, but if you will do an upgrade I assume the new one will already have this configuration. Also if you want to enable AUX this is an very easy job and maybe you can found somebody in your city who can enable it. 😊
@@BMWEMS hi thank you for ur reply! Yes I’ll buy the cable and give it a go. Do I have to pay the software or is it free online? My vehicle is pre lci and I was also wanting to code the lci dongs to my vehicle using the newer HU
You are welcome. You will fond the software on the internet, some people are giving you also the software with the cable. Also I recommend you to buy a cable with switch for D/K protocol, to be able to use it on all models until 2011/2012 (all before F series). Somethink like this: m.aliexpress.com/i/32947962169.html
Unfortunately I do not know this procedure, if you know how to do it please let me know and I can explain this in video description for other people which has this issue.
Hola , tengo un BMW X3 E83 , con esa misma radio y no consigo poner el auxiliar, me podrías decir qué programa utilizas para poder cambiarlo y que me hace falta para hacerlo?? Un saludo y muy buen vídeo.
Hello, I will answer you in English since is more easy for me. I'm using NCS Expert and NCS Dummy with bmw INPA cable. Here is my first video were I'm presenting cable and applications : ua-cam.com/video/J5z3xtBHkys/v-deo.html
Oi amigo sou brasileira preciso de sua ajuda eu quero usar o pendrive no auxílio com um conversor de áudio P2 fêmea como faço na bmw e90 bmw 2010 320ia ???? Tenho função auxiliar mais não está funcionando como faço?
Hi, yes, you are right, but please take care to open "FSW_PSW.trc" since there are more files with. trc extension. NCS Dummy is only an easy readable interface over that "trc" file. 😊
Hi, I didn't use this tool, I checked on internet and I observed that this tool can be also used for coding.You can check if you have RAD component there and check what can you code for RAD module.
@@BMWEMS Hey, just an update. Didnt manage to get it started at first, cable wasnt detected until I change port setting to COM1. Ignition and Cable now detected. I did all the steps but had no RAD1, had RAD2 instead. I used that. Followed all the step just to see that AUX was active in NCSDummy. Unfortunately, the radio still doesnt display AUX - just TUNER, CD, USB (which I cant click too). Whats the best step forward? Any thoughts on what the problem is?
Hi, so you found RAD module (RAD2 should be also ok, depend on RAD variant), you found there AUX, you set it on aktiv but is still not visible in the menu? Can you check again if the settings (set to aktiv) were taken?, maybe this configuration was not flashed in module.
@@BMWEMS Yes, same as your vid. It was already set to aux (2nd option). Tried it two times. Reset the whole process and same results. Still not active on the radio. Radio works good btw, CD and Tuner works fine.
Hi. BMW E90 318i 2007. My AUX port is working, but it has a pretty low volume compared to the FM radio. Do you know any solution to make it louder? Thanks.
@@BMWEMS I think I solved it now. There is the user manual how you can do it: www.e90post.com/forums/attachment.php?attachmentid=55323&d=1169133185 6th page, “Adjusting the volume for external audio sources.” Try it out. 🙂
@@BMWEMS Cool, be sure to let me know if it worked for you. 😁 It might also worth a video upload, because it was quite hard to find a solution for this.
I tryed today and is working, thanks 😁 I will try to do an short video about how to change the volume for AUX, I think will be useful also for other people 😊
I'm this case you need somebody with an OBD to code it in Radio module, you can do an search on internet, maybe you can found somebody in your area, also if you want, you can buy an OBD for you and to do it on your own😊
@@BMWEMS Thanks for reply, I managed to get it from some site 8months ago and got it working somehow. I had bit more issues with not reading chassis but your video helped nevertheless, thanks bro!
Hi, I didn't try with other tools, I tried only with NCS expert, but if you have acces at radio module configuration, I assume you ca do it with any type of tool. 😊
@@BMWEMS Thanks for the answer, i have try with Carly and bluetooth adaptater. Seems to not have the radio module, may be bluetooth adaptater will work with ncs expert.
Update: bmwtools doesn't work with bluetooth i have buy a Dcan Cable on amazon and it's perfect i have aux on my E90 now :) Thanks my friend and happy new year😃✌
Can someone help me with this problem like hes.i have bmw e90 2005-2006 whith a bmw business cd and i don’t show the aux please someone help me and were did this person get this app
Hi, if you want somebody to enable this option for you, you need to search for somebody in your are who can do diagnosis for BMW and ask him to enable this, If you want to do this alone, you need to learn some basic coding for BMW. You need an BMW obd "INPA" diagnosis cable, an pc with this applications installed on it (NCS DUMMY and NCS expert). You can see in my firs video about programing what you need to start programming. 😊
Hi Michele, I do not know exactly what is configured inside, but I can put here what is inside my expert profile and where are the profile list :). So, you need to go where is installed NCSEXPERT and then to go in to PFL folder and there you have more profile, my recommendation is to create a copy for one of them and rename this copy as "01_expertenmode_ver_3.0.pfl" and change what is inside (you can edit the file with Notepad) with the following: [HEADER] ProfilFormatVersion=3.0 ProfilBezeichnung=Revtor's NCS Expert Profile ProfilKommentar=NCS Expert profile by revtor ProfilTag= ProfilMonat= ProfilJahr= ProfilPruefsumme=0066 [FGNR_ZCS] FgNrEingabeModus=1 ChecksummeBerechnen=1 LoeschenVorEingabe=0 FktZcsEingeben=1 FktZcsAusSteuerdatei=1 FktZcsAusFahrzeug=1 FktBrAuswahl=1 [ASW] AswLesenModus=1 AswTrace=1 AswLeseDatei= [FSWPSW] FswPswLesenModus=1 FswPswTrace=1 FswPswManipulieren=1 FswPswLeseDatei= [NETTODATEN] NettoDatenLesenModus=1 NettoDatenTrace=1 NettoDatenLeseDatei= [SGET] SgetLesen=1 FktSgAuswahl=1 FktSgetEingeben=1 [CODING] ZcsutLesen=1 ZcsSchreibenModus=3 ZcsVorCodierungLoeschen=0 ZcsNurAktuellesSg=0 FktSgCodieren=1 FktFzgCodieren=1 FktCodierJobAendern=1 FktSgAuslesen=1 KonvertierenFswPsw=1 FktKernfunktionen=1 SpezialJobName= SgCodFktText= FzgCodFktText= CiFromSg=0 [INDIVID] CheckIndividTrace=1 FktIndivid=1 FktKernfunktionen=1 [VERIFIKATION] CodierungEin=0 VfpEin=0 ZutEin=0 SteuerFileName= [APPLIKATION] AppKennung=SERIE
Hi, first you can try with ISTA D to see if you have correct communication, also an idea is to check all data from. MAN file, this should be empty before starting, if you have something there delete it. 😊
Hi, is exactly like mine, I used it on bmw e87, for E87 you need to select e89, e89 means more car types, you can see in this video al minute 1:30, when I'm starting NCS Dummy that there are in "(" different models and also e87 here is a video with applications and cable ua-cam.com/video/J5z3xtBHkys/v-deo.html
Hi, no, it will not work, for f10 you need another type of cable, is an ENET cable an you need another type of application, I think the name is "E-sys". 😊
Hello, I have done this tutorial, for me shows that the Aux is already active so I don’t need to coding. But on my Prof. Radio I just get the options Radio, Cd and USB. I lost Aux while installing a Android head unit 10,5 inch on my dashboard. Now I lost a lot of money for it and I can’t use because is necessary to be connected on Aux. You know what can be the problem? I hope you can help me. Thx bro.
Hi, let see if I understood correctly. So you changed your BMW radio with an aftermarket radio with Android, right? or somehow android unit is connected at your BMW business/professional radio?
@@BMWEMS no, I still have the bmw prof radio installed, it’s just a android display for the dash, it’s connected on Bmw Radio and needs to be connected on Aux to listen to music. But now I have no Aux anymore whit or without android head unit on the dash. I hope you understand me
Ok, I understood, is veary interesting what is happening there. I heard people who tell me that the AUX was missing after some works, but it was disabled form coding. If in your case, in the RAD module on NCS expert/dummy is still there, I do not have an soution, but maybe you can try to check all conections from the BMW radio, maybe there is an Hardware check for AUX. Also you can try to disconnect all wires(wich are connected to BMW radio) of Android unit and check again the menu and also the coding to see if is still set to active. Also you can try to set it to inactive, to code it and then to set it again to active and to code it. :)
@@BMWEMS hey bro thx for your advice, the Aux cable was not plugged in correctly, now I can listen to music. I have spent so much time and money for nothing. But now I know how to coding my BMW😂👍🏽
Hi, I assume will not work with default profile. But I have here in comments of the video a discussion regarding how to create this profile. Also I copied that message here, try to follow this instruction : I will put here what is inside this profile, maybe is benefic and for other people if they want to see what is inside. So, you need to go where is installed NCSEXPERT and then to go in to PFL folder and there you have more profile, my recomadation is to create a copy for one of them and rename this copy as "01_expertenmode_ver_3.0.pfl" and change what is inside (you can edit the file with Notepad) with the following: [HEADER] ProfilFormatVersion=3.0 ProfilBezeichnung=Revtor's NCS Expert Profile ProfilKommentar=NCS Expert profile by revtor ProfilTag= ProfilMonat= ProfilJahr= ProfilPruefsumme=0066 [FGNR_ZCS] FgNrEingabeModus=1 ChecksummeBerechnen=1 LoeschenVorEingabe=0 FktZcsEingeben=1 FktZcsAusSteuerdatei=1 FktZcsAusFahrzeug=1 FktBrAuswahl=1 [ASW] AswLesenModus=1 AswTrace=1 AswLeseDatei= [FSWPSW] FswPswLesenModus=1 FswPswTrace=1 FswPswManipulieren=1 FswPswLeseDatei= [NETTODATEN] NettoDatenLesenModus=1 NettoDatenTrace=1 NettoDatenLeseDatei= [SGET] SgetLesen=1 FktSgAuswahl=1 FktSgetEingeben=1 [CODING] ZcsutLesen=1 ZcsSchreibenModus=3 ZcsVorCodierungLoeschen=0 ZcsNurAktuellesSg=0 FktSgCodieren=1 FktFzgCodieren=1 FktCodierJobAendern=1 FktSgAuslesen=1 KonvertierenFswPsw=1 FktKernfunktionen=1 SpezialJobName= SgCodFktText= FzgCodFktText= CiFromSg=0 [INDIVID] CheckIndividTrace=1 FktIndivid=1 FktKernfunktionen=1 [VERIFIKATION] CodierungEin=0 VfpEin=0 ZutEin=0 SteuerFileName= [APPLIKATION] AppKennung=SERIE
I have BMW 320d 2007, finally I activate the AUX, now on screen I can select AUX, but still aux doesnt work when I plug aux wire to my android phone. (Aux female plug is good) pleaseee help me
Hi, if AUX is visible on the screen then should be only an connection issue, maybe the connection cable from AUX connector to the Radio is broken, you can check the connections
Hi, I didn't try to change something about PDC in RAD1, I will check when I have access to the laptop to see if there can be something configured for PDC and I will let you know. 😊
Hi, I checked today the RAD1 setting an here is what I found regarding PDC in RAD12.C10: - PDC_ON_OFF - I asuume used to enable/disable PDC; - VOL_PDC_MIN/MAX_RAD - I do not know for what are this SETTINGS (maybe this settings are about volume depends on shape of the car) but there you can select the chasy type, so I suggest you to not change something here; OFFSET_ENT_PDC_RAD - here I assume is difference of sound between volume of radio ond volume of PDC sound; DELTA_PDC_ENT_RAD - here I saw you can decrease rad volume during PDC on, but I do not know what value should be there; PDC_ADAPTATION_F_R_RAD - Heare are also setting regarding the chassy shape, so I recommend you to not change something here; These are all options found by me regarding PDC. I didn't try to change something from there. 😊
Hi, basically you receive a part of programs when you buy the cable, if not you can search on Google what type of program you need. Here is a link from where I think you can found some programs www.bimmergeeks.net/downloads. If you don't know what you need, see my first video with: What you need to start BMW coding.
I think no, at least no without an device connected to OBD connector, because you need to change this from Radio memory. (from what I know there are also some device which are working with mobile phone, but I think the question is if is possible to do this from on board menu or something like this) 😊
Hello mate I've managed to get the coding for aux sorted but now I am having problem, my brake pad sensor is showing after playing about on ncs and I can't get it to go off, I am having the 5de1 and 5de0 error codes show. Any help will be appreciated
Hi, I assume this errors has no connection with coding of the AUX since this are different modules. Maybe your service interval reached value 0 for break pad or you have an issue with brake sensor, maybe there is a bad wire connection or the sensor is damaged (can be damaged even if is looking good outside). First maybe you can try to reset service interval for brake pads (rear and front) and after that maybe in the second step you can check the sensor. 😊
I think it is down to me playing around on nscexpert not knowing what I'm doing😂 the service interval for the brake pads is showing _ _ _ _ _ and reset does nothing, think I'm just going to remove the brake pad sensors tbh 😂
Yes, I think is a good idea to check the sensor, you can also try to do an power on reset to the ECU (by removing and reconnecting one of the battery terminal), also you can try to reverse the changes, there is a procedure te recover default data in a module but with this procedure you will lose all configuration done until now 😁. But if you are seeing there - - - - when you are trying to reset the interval I assume is something wrong with the brake pad sensor. But is only an assumption. 😉
@@BMWEMS I have already disconnected negative terminal and I'm going to leave overnight, if this doesn't do the trick how would I go about reseting to default module as I've kinda figured out how to use ncs and would be able to code the aux back in. Thanks
I do not remember correctly the entire procedure but I will search on forums were I found this, but you changed only in RAD module, because I'm almost sure that this module will not impact the brake system, maybe only if you changed something in other module.
Normally you can receive it with the cable or if not, you can search on forums for this applications and I'm sure you will found some version for free. I received them with the cable.
@@BMWEMS When trying to load the chassis e89 (and specifically I need for e87) in ncs dummy, the option is not there. In the log it says that it has only loaded files for e39 and e46. Could you please upload your SP-Daten file for e89 to the onedrive? It should be in C:\NCSEXPER\DATEN. If it is not there then I don't think the tutorial will work for other people who need e89 etc - maybe putting a disclaimer in the description about this could help too. Thank you!
Hi, I download it with ncs EXPERT application, but this was ~2 years ago so I don't remember the name of source, I sow something on this forum "mhhauto.com/Thread-Need-NCS-revtor-s-expert-profile" but I don't know what exactly is inside, maybe if you can't found it I will try to open it and tell you what is inside.
@@zohaib445 yes, basically the BMW has almost the same modules on all cars, I think all series 1 and 3 has the same modules from 2005 to 2011 (sometimes there are small differences in the name, for e.g. FRM on older and NFRM on newest, but is the same module with some updates). In ncs Dummy you have there (e89) and under this you can see all cars which are included in this series.
@@zohaib445 yes and no, you will select e89, but depend on what you want to do you will select a different module. For e.g. in this video is RAD (radio) module selected to activate AUX, you can follow exactly the steps from the video an will work. You can see that in first steps you need to select a module from where ncs Expert to read some identification code of the car, there is the step where I selected FRM, but you can select each one you want form that list (there are only 3 modules on the list on my car).
Hi, I'm using an OBD2 diagnosis cable. And for coding I'm using NCS Expert and NCS Dummy applications. If you want you can see in my first video (ua-cam.com/video/J5z3xtBHkys/v-deo.html) what I'm using. Have a nice day. :)
Thank you!! Perfect Worked on BMW E91 2007/4 First time i tried the software NCSexpert and NCSdummy. (didn´t have exactly the same layout in mine NCSExpert) but with your movie it was easy! Thanks!! Recommed!!
Is interesting, you should have an TRC file, in that TRC file are read the data from the car when you do read ECU. Did you perform read of the ECU from ncs expert?
Hi I’ve connected my car with inpa cable. The car is connected and i checked in inpa. When i load profile in ncs expert. Select chassi and frm. It gives me this error FA-Fehler COAPI-2000: Fehler in EDIABAS oder in SG- Beschreibungsdatei BIP-0001: Zu langer Job- Parameter oder String-Register-Zugriff FRM 87 COAPI-2000: Fehler in EDIABAS oder in SG- Beschreibungsdatei FA READ COAPI-2000: Fehler in EDIABAS oder in SG-Beschreibungsdatei FA_READ: A_PL2FRX
@@BMWEMS unfortunately I’m getting same error. I tried getting lates sp daten also. I checked in inpa in radio module and it says my aux is off. But I cannot connect with ncsexpert. Any help?
Man thanks a lot!! My 330i E90 didn't display AUX menu on head unit but now with your help i succeed to make it works!
Thanks you very much for your comment! 🙂
Thanks dude, very helpful, works perfectly on e87, 118d.
Thanks you! 😊
how did you do it? I have no idea where to get this software and what hardware I need …
@@iuppiterzeus9663 You just need the BMW cable, which I ordered on amazon for 30 EUR
And BMW standard tools software, I got it from bimmer geeks website, but it seems germans did a german thing a decided to be super not cool about it and forced them to pull it down.
I got it on an ooold notebook somewhere who knows where, sorrz, but it must be on the intranets somewhere or on some warz site.
Hey man, just wanted to let you know this still worked on a 2005 318i. Big thanks!
Hi, thanks you very much! I'm very happy to hear that!
How did you connect your laptop with your car bro
Obd2 port
k + dcan cable
Via OBD2 port, there is a video on my channel about this.
Very helpful description. Worked fine!
Thx a lot
Thanks for your feedback. I'm glad to hear that.
Thanks for making this video. Quick question regarding the chasis selection . I have a 2009 5dr hatchback 116i (E87) and noticed in your video when selecting chasis it doesn't show E87 (it skips from E85 to E89). Does this mean it won't work on E87?
Hi, I'm very happy to hear that my information helps you. Regarding your question, for E87 you need to select E89. E89 is for (E81, E82, E84, E87, E88, E89, E90, E91, E92, E93). So in conclusion will work also for your car. 😊
@@BMWEMS great thanks for getting back to me.
Hello, its the only way to recovery aux mode, or we have possibilities in another way? Thanks a lot
Hi, this is the only way from what I know, only to code if from sw via diagnosis.
What Software are you using to do this. And also how did you connect your laptop to your car?
Software are NCS EXPERT and NCS Dummy and I have an INPA bmw cable wich is connected to the OBD2 connectors of the car and to the laptop.
@@BMWEMS can you please tell me where can I download this?
@@bmw318iyu Hi, from what I'm remember I downloaded the SW from here 😊 www.bimmergeeks.net/downloads (standard tools)
Great video, exactly what I need to do. This is the first time I use NCS Express, when I try to select FRM I get an error (COAPI-2000). But, when I select CAS it loads the VIM properly.
Is there anything I must do to be able to access the FRM?
Thanks!!
Hi, thanks for your comment, there is no special thinks which need to be done to access FRM, should work similarly with CAS, please check if you cable is set on D-CAN or on K-CAN (if you have a switch there in cable). Please check if something from here can help you www.bimmerfest.com/threads/ncs-expert-vin-is-faulty-error-please-help.1400175/
Also didn’t have the same profiles as you in NCS EXPERT (0:37 time)
I added the 01.expertenmode_ver_3.0.pfl but get the error while trying to launch it “prufsumme falsch!”
Even if I use another profile, the “Start” option on F1 doesn’t show.
Instead “FG/ZCS/FA shows (0:41)
And if I were to choose “Chassi” that shows up in F2, and choosing car model, no FRM options shows up.
Are my files correctly installed?
Is not mandatory to have there FRM, also is ok if you have any module with "expert" in name, if you don't have FRM, you can select CAS, or something else, this selection is used only to take some coding information about the car 😀
You can also try why is wrote hire: mhhauto.com/Thread-Need-NCS-revtor-s-expert-profile
@@BMWEMS thanks for a quick reply!
In my NCS expert I can load profiles, but after that my F1 button doesn’t change to “start”. But “chassi” appears, and after choosing my chassi, no other pop up window appears, where I can choose ECU (Cas, frm or nrfm).
So I can’t continue; l can not “process ECU” and search for the radio module.
Is my NCS EXPERT set up as it should?
Try to reinstall ncs expert, download standard tool from here : www.bimmergeeks.net/downloads and inside the archive there are some instructions about how to install this tools 😀
hello I have a z4 e 85 and I also need to activate the AUX. can you tell me where you find the software and wiring to do this job? a big thank-you
E85 doesn’t need coding. It only needs the correct cable.
Hi, you can try on ebay, I buy it from a guy in my city and he gave me also the sw.
Hi at first thank you very much!
I have a question: when i click FRM there come the Error "VIN is faulty"
What is my Problem? 😅
Hi, you are welcome! This is available only for FRM? Or also for other modules?
Hi so i have the Problem now that i cant find after "choose ECU" the 1Rad module
There is just: 43BMO, ABG, CAS, DSC, FRM, FZD, IHK, JBBF, KOMBI
So what is my Problem? 😅
Can you try to perform an diagnosis with ISTA+ and to check there if you have all modules visible with green or yellow in diagnosis interface? 😁
Hi I couldnt find the Problem 😞
Did you try to read errors using ISTA+?
Hello, good morning, could you send me the link to download that software and be able to activate the aux?
Helios good morning,coludirse you debe me the link yo downloand test software and be vale yo actívate the aux
Hi, I download them from here: www.bimmergeeks.net/downloads
ola amigo voçe podia me explicar como codificar habilitar para por o gong e o pdc no radio igual ao seu bmw 320 e 91
?
Hi, PDC are added by factory throught radio on e90 LCI, unfortunately I do not know how to do this.
Hi I have pre lift ‘99 e46 with business cd from 2004 supporting aux that I installed but when I connect my car to ncs expert there is no RAD module so I can’t program the aux, can you help me?
Hi, I do not have experience with updating one of the car modules yet, but I assume what can help you. I assume somehow you need to update the year of the car using NCS expert and from what I know you have 2 modules where the year is stored (you can search on Google how to do this, I didn't do this until now, so I do not know exactly the procedure) and if you have a new RAD module from an 2004 car, I assume you need to change the yer at 2004. I sow somebody doing this with an e60 or e90 with an FRM module, I can't remember exactly now. You ca try this, and after changing the yer I assume the car will be capabile to identify this new RAD. Is just an assumption, maybe you can read also on forums other opinions. 😊
Sirve para un bmw x3??
Como conectaste la computadora al estereo?
Hi, yes, can be also done on BMW X3, you need an INPA BMW cable to connect the car with pc 🙂
Hello, I have a 2006 e90 320, if I do exactly the same thing, will it work?
Hi, yes, these are my expectations if you have the same problem 🙂
my radio dosnt work cause my computer crash during the operation any advice on how to reset everything ?
Hi, I knew at some point that you can reset ECU by flashing an empty .MAN file, but if somethink like this is not working please try this (I found this on a forum):
1. Load NCSExpert.
2. Load Profile and select Expertmode
3. F1 (VIN/ZCS/FA)
4. F3 (ZCS/FA f .ECU)
5. Choose E89 (for the E9X)
6. Select CAS
7. F6 (BACK)
8. F4 (Process ECU)
9. Select the Module I want to Revert back to Stock.
10. F2->Choose "SG_Codieren->ok
11. F3->to start coding the ecu with factory settings according to the vehicle VO.
@@BMWEMS thank you very mutch i will try it tommorrow
My 330xi the aux has no sound just static only one speaker works on aux idk what do do can anyone help I have a 2006 bmw 330xi
Hi mate. You are great and very clear. I just activated aux on my car. Thank a lot.
Hi Michele, thanks a lot for your appreciation 😊. I'm very happy to hear that my information helps you.
So i need to “hack” the car to make it go to aux? We have an 2005 320, will this work or?
Yes, if you what to work AUX you need to enable it from the Radio module, there is no other posibility. I assume your car is an bmw e90.
BMW EMS ooh okay, thank you!
@@Iris-lz3hk you are welcome.
@@BMWEMS can I do this with 120d e87 I have aux input but no option for this mode on stereo?
Hi, basically yes, should be exactly the same procedure. 😊
I have this same issue, if I was to buy a professional HU and swap my business cd with the new one would I still have to do this? Or would it fix the problem?
Hi, this depends by your new Radio, but if you will do an upgrade I assume the new one will already have this configuration. Also if you want to enable AUX this is an very easy job and maybe you can found somebody in your city who can enable it. 😊
@@BMWEMS hi thank you for ur reply! Yes I’ll buy the cable and give it a go. Do I have to pay the software or is it free online? My vehicle is pre lci and I was also wanting to code the lci dongs to my vehicle using the newer HU
You are welcome. You will fond the software on the internet, some people are giving you also the software with the cable. Also I recommend you to buy a cable with switch for D/K protocol, to be able to use it on all models until 2011/2012 (all before F series). Somethink like this: m.aliexpress.com/i/32947962169.html
Ciao,
che modulo serve per collegare il pc al mio BMW E83 del 2006 ?
What if i would like to do the same operation in my E87? In NCS i cant see that model on the list.
Hi, yes, e87 has exactly the same modules like e90.🙂
@@BMWEMS thanks, im going to try
Hi friend could you please share the ncs programs and files you used?
I downloaded sw from here www.bimmergeeks.net/downloads
You can press some bottons on radio and it will reset it is very easy
How?
Unfortunately I do not know this procedure, if you know how to do it please let me know and I can explain this in video description for other people which has this issue.
How did you resolve this way?
thanks soo much, please i have a 2007 E87 with the same issue, is there a way you can share the softwares and files you used with me ?
Hi, from what I'm remember I downloaded the SW from here 😊 www.bimmergeeks.net/downloads (standard tools)
hey man they are taken down, could you share them with me?
Hola , tengo un BMW X3 E83 , con esa misma radio y no consigo poner el auxiliar, me podrías decir qué programa utilizas para poder cambiarlo y que me hace falta para hacerlo?? Un saludo y muy buen vídeo.
Hello, I will answer you in English since is more easy for me. I'm using NCS Expert and NCS Dummy with bmw INPA cable. Here is my first video were I'm presenting cable and applications : ua-cam.com/video/J5z3xtBHkys/v-deo.html
Thank you Very much for your fast reply! Your vídeo has Been a solution for solve the same problem in my Car! Merci beaucoup
Thanks a lot for your appreciation! 😊
I have an X3 E83 and I get an error when I try to do this
What type of error do you have, what is the message?
Oi amigo sou brasileira preciso de sua ajuda eu quero usar o pendrive no auxílio com um conversor de áudio P2 fêmea como faço na bmw e90 bmw 2010 320ia ???? Tenho função auxiliar mais não está funcionando como faço?
Hi, unfortunately I have also issue in connection with the RAD module for BMW E90 2010 😔 I think is something related speed of the cable.
so am i right? You open the "trc" file in NCS Dummy but you export the "man" file after that?
Hi, yes, you are right, but please take care to open "FSW_PSW.trc" since there are more files with. trc extension. NCS Dummy is only an easy readable interface over that "trc" file. 😊
@@BMWEMS yeah sure, Thank you! I will try it tomorrow and tell you the results :)
You are welcome! 😊
Would this work with a BMW Pro? Mine doesnt display AUX too.
Hi, I didn't use this tool, I checked on internet and I observed that this tool can be also used for coding.You can check if you have RAD component there and check what can you code for RAD module.
@@BMWEMS Thanks for the reply. Would be trying it now on an E90 320D. Will update you if it works.
@@BMWEMS Hey, just an update.
Didnt manage to get it started at first, cable wasnt detected until I change port setting to COM1. Ignition and Cable now detected.
I did all the steps but had no RAD1, had RAD2 instead. I used that.
Followed all the step just to see that AUX was active in NCSDummy.
Unfortunately, the radio still doesnt display AUX - just TUNER, CD, USB (which I cant click too).
Whats the best step forward? Any thoughts on what the problem is?
Hi, so you found RAD module (RAD2 should be also ok, depend on RAD variant), you found there AUX, you set it on aktiv but is still not visible in the menu? Can you check again if the settings (set to aktiv) were taken?, maybe this configuration was not flashed in module.
@@BMWEMS Yes, same as your vid. It was already set to aux (2nd option). Tried it two times. Reset the whole process and same results. Still not active on the radio. Radio works good btw, CD and Tuner works fine.
Hi. BMW E90 318i 2007. My AUX port is working, but it has a pretty low volume compared to the FM radio. Do you know any solution to make it louder? Thanks.
Hi, you are right, this is happening also in my car, unfortunately there is no solution to solve this from software (at least I do not know one) 😔
@@BMWEMS I think I solved it now. There is the user manual how you can do it: www.e90post.com/forums/attachment.php?attachmentid=55323&d=1169133185
6th page, “Adjusting the volume for external audio sources.” Try it out. 🙂
Very nice, I learned something new today, thanks 😁 I will try it also on my car 👍
@@BMWEMS Cool, be sure to let me know if it worked for you. 😁 It might also worth a video upload, because it was quite hard to find a solution for this.
I tryed today and is working, thanks 😁 I will try to do an short video about how to change the volume for AUX, I think will be useful also for other people 😊
My radio 1RAD won’t show up. I have a bmw e87 2005 116i. Pls help
Hi, your radio is not show AUX in the menu?
@@BMWEMS no it does not show up
I'm this case you need somebody with an OBD to code it in Radio module, you can do an search on internet, maybe you can found somebody in your area, also if you want, you can buy an OBD for you and to do it on your own😊
Hi, do you have profiles for NCIS expert ?
Hi, I have downloaded the complete sw together with profiles, you can try to search here www.bimmergeeks.net/downloads
@@BMWEMS Thanks for reply, I managed to get it from some site 8months ago and got it working somehow. I had bit more issues with not reading chassis but your video helped nevertheless, thanks bro!
How do I find the program for my BMW 1 series 2008,?
Hi, should work with exactly the same SW like on 3 series. Is NCS expert with NCS Dummy used.
Interesting :) I was wondering if it's possible to do it with Carly or Bimmercode.... Because i have this problem
Hi, I didn't try with other tools, I tried only with NCS expert, but if you have acces at radio module configuration, I assume you ca do it with any type of tool. 😊
@@BMWEMS Thanks for the answer, i have try with Carly and bluetooth adaptater.
Seems to not have the radio module, may be bluetooth adaptater will work with ncs expert.
Hmm, from what I know, the NCS expert is working only with INPA cable and some ethernet cable... But you can try 😊
@@BMWEMS Thanks :)
Update: bmwtools doesn't work with bluetooth i have buy a Dcan Cable on amazon and it's perfect i have aux on my E90 now :) Thanks my friend and happy new year😃✌
Can someone help me with this problem like hes.i have bmw e90 2005-2006 whith a bmw business cd and i don’t show the aux please someone help me and were did this person get this app
Hi, if you want somebody to enable this option for you, you need to search for somebody in your are who can do diagnosis for BMW and ask him to enable this, If you want to do this alone, you need to learn some basic coding for BMW. You need an BMW obd "INPA" diagnosis cable, an pc with this applications installed on it (NCS DUMMY and NCS expert). You can see in my firs video about programing what you need to start programming. 😊
Hi dear. Do you know how create NCS dummy profile in NCS expert tool? Because now i have only two profiles :"manipulation" and "factory coding".
Hi Michele, I do not know exactly what is configured inside, but I can put here what is inside my expert profile and where are the profile list :). So, you need to go where is installed NCSEXPERT and then to go in to PFL folder and there you have more profile, my recommendation is to create a copy for one of them and rename this copy as "01_expertenmode_ver_3.0.pfl" and change what is inside (you can edit the file with Notepad) with the following:
[HEADER]
ProfilFormatVersion=3.0
ProfilBezeichnung=Revtor's NCS Expert Profile
ProfilKommentar=NCS Expert profile by revtor
ProfilTag=
ProfilMonat=
ProfilJahr=
ProfilPruefsumme=0066
[FGNR_ZCS]
FgNrEingabeModus=1
ChecksummeBerechnen=1
LoeschenVorEingabe=0
FktZcsEingeben=1
FktZcsAusSteuerdatei=1
FktZcsAusFahrzeug=1
FktBrAuswahl=1
[ASW]
AswLesenModus=1
AswTrace=1
AswLeseDatei=
[FSWPSW]
FswPswLesenModus=1
FswPswTrace=1
FswPswManipulieren=1
FswPswLeseDatei=
[NETTODATEN]
NettoDatenLesenModus=1
NettoDatenTrace=1
NettoDatenLeseDatei=
[SGET]
SgetLesen=1
FktSgAuswahl=1
FktSgetEingeben=1
[CODING]
ZcsutLesen=1
ZcsSchreibenModus=3
ZcsVorCodierungLoeschen=0
ZcsNurAktuellesSg=0
FktSgCodieren=1
FktFzgCodieren=1
FktCodierJobAendern=1
FktSgAuslesen=1
KonvertierenFswPsw=1
FktKernfunktionen=1
SpezialJobName=
SgCodFktText=
FzgCodFktText=
CiFromSg=0
[INDIVID]
CheckIndividTrace=1
FktIndivid=1
FktKernfunktionen=1
[VERIFIKATION]
CodierungEin=0
VfpEin=0
ZutEin=0
SteuerFileName=
[APPLIKATION]
AppKennung=SERIE
Thx verry much bro
I did this a while ago, but now I get: Error in CABI.EER and ERROR.LOG! and more text, what's up? What I can do?
Hi, first you can try with ISTA D to see if you have correct communication, also an idea is to check all data from. MAN file, this should be empty before starting, if you have something there delete it. 😊
Which software and cable I need to use for BMW e87 ?
Because at your NCS Expert I cant see E87
Hi, is exactly like mine, I used it on bmw e87, for E87 you need to select e89, e89 means more car types, you can see in this video al minute 1:30, when I'm starting NCS Dummy that there are in "(" different models and also e87 here is a video with applications and cable ua-cam.com/video/J5z3xtBHkys/v-deo.html
@@BMWEMS thanks mate
You are welcome! 😊
Hii, can i use this software to code for bmw f10 2010 model?
Hi, no, it will not work, for f10 you need another type of cable, is an ENET cable an you need another type of application, I think the name is "E-sys". 😊
@@BMWEMS oke i will search for it thanks 🙂
You are welcome!
Hello, I have done this tutorial, for me shows that the Aux is already active so I don’t need to coding. But on my Prof. Radio I just get the options Radio, Cd and USB. I lost Aux while installing a Android head unit 10,5 inch on my dashboard. Now I lost a lot of money for it and I can’t use because is necessary to be connected on Aux. You know what can be the problem? I hope you can help me. Thx bro.
Hi, let see if I understood correctly. So you changed your BMW radio with an aftermarket radio with Android, right? or somehow android unit is connected at your BMW business/professional radio?
@@BMWEMS no, I still have the bmw prof radio installed, it’s just a android display for the dash, it’s connected on Bmw Radio and needs to be connected on Aux to listen to music. But now I have no Aux anymore whit or without android head unit on the dash. I hope you understand me
Ok, I understood, is veary interesting what is happening there. I heard people who tell me that the AUX was missing after some works, but it was disabled form coding. If in your case, in the RAD module on NCS expert/dummy is still there, I do not have an soution, but maybe you can try to check all conections from the BMW radio, maybe there is an Hardware check for AUX. Also you can try to disconnect all wires(wich are connected to BMW radio) of Android unit and check again the menu and also the coding to see if is still set to active. Also you can try to set it to inactive, to code it and then to set it again to active and to code it. :)
@@BMWEMS hey bro thx for your advice, the Aux cable was not plugged in correctly, now I can listen to music. I have spent so much time and money for nothing. But now I know how to coding my BMW😂👍🏽
No problem 😁 I'm very happy that my advice helps you. 😊👍
How to know wich module the radio is?
Is RAD module. Is just an abbreviation from Radio.
how did you connect the bmw and the laptop?
Hi, is connected through INPA cable (diagnosis interface cable)
@@BMWEMS thank you
You are welcome! 😀
Thank you so much. This is very helpful
Thank you for your feedback! 🙂
hello i dont have expert profile can i do with defeult profile for aux activitone?
Hi, I assume will not work with default profile. But I have here in comments of the video a discussion regarding how to create this profile. Also I copied that message here, try to follow this instruction : I will put here what is inside this profile, maybe is benefic and for other people if they want to see what is inside. So, you need to go where is installed NCSEXPERT and then to go in to PFL folder and there you have more profile, my recomadation is to create a copy for one of them and rename this copy as "01_expertenmode_ver_3.0.pfl" and change what is inside (you can edit the file with Notepad) with the following:
[HEADER]
ProfilFormatVersion=3.0
ProfilBezeichnung=Revtor's NCS Expert Profile
ProfilKommentar=NCS Expert profile by revtor
ProfilTag=
ProfilMonat=
ProfilJahr=
ProfilPruefsumme=0066
[FGNR_ZCS]
FgNrEingabeModus=1
ChecksummeBerechnen=1
LoeschenVorEingabe=0
FktZcsEingeben=1
FktZcsAusSteuerdatei=1
FktZcsAusFahrzeug=1
FktBrAuswahl=1
[ASW]
AswLesenModus=1
AswTrace=1
AswLeseDatei=
[FSWPSW]
FswPswLesenModus=1
FswPswTrace=1
FswPswManipulieren=1
FswPswLeseDatei=
[NETTODATEN]
NettoDatenLesenModus=1
NettoDatenTrace=1
NettoDatenLeseDatei=
[SGET]
SgetLesen=1
FktSgAuswahl=1
FktSgetEingeben=1
[CODING]
ZcsutLesen=1
ZcsSchreibenModus=3
ZcsVorCodierungLoeschen=0
ZcsNurAktuellesSg=0
FktSgCodieren=1
FktFzgCodieren=1
FktCodierJobAendern=1
FktSgAuslesen=1
KonvertierenFswPsw=1
FktKernfunktionen=1
SpezialJobName=
SgCodFktText=
FzgCodFktText=
CiFromSg=0
[INDIVID]
CheckIndividTrace=1
FktIndivid=1
FktKernfunktionen=1
[VERIFIKATION]
CodierungEin=0
VfpEin=0
ZutEin=0
SteuerFileName=
[APPLIKATION]
AppKennung=SERIE
What cable do you use to connect
Hi, a cable like this www.amazon.com/AntiBreak-Ediabas-Interface-Support-serials/dp/B07GRG44FP
I have BMW 320d 2007, finally I activate the AUX, now on screen I can select AUX, but still aux doesnt work when I plug aux wire to my android phone. (Aux female plug is good) pleaseee help me
Hi, if AUX is visible on the screen then should be only an connection issue, maybe the connection cable from AUX connector to the Radio is broken, you can check the connections
Hola buenas muy bien explicado donde puedo comprar el cable
Hi, you can search on ebay, I buy it from a guy in my city and he gave me also the sw.
Hi
There are any options in 1rad module about pdc ?
Hi, I didn't try to change something about PDC in RAD1, I will check when I have access to the laptop to see if there can be something configured for PDC and I will let you know. 😊
@@BMWEMS okey man waiting for you. Thanks 🙏
Hi,
I checked today the RAD1 setting an here is what I found regarding PDC in RAD12.C10:
- PDC_ON_OFF - I asuume used to enable/disable PDC;
- VOL_PDC_MIN/MAX_RAD - I do not know for what are this SETTINGS (maybe this settings are about volume depends on shape of the car) but there you can select the chasy type, so I suggest you to not change something here;
OFFSET_ENT_PDC_RAD - here I assume is difference of sound between volume of radio ond volume of PDC sound;
DELTA_PDC_ENT_RAD - here I saw you can decrease rad volume during PDC on, but I do not know what value should be there;
PDC_ADAPTATION_F_R_RAD - Heare are also setting regarding the chassy shape, so I recommend you to not change something here;
These are all options found by me regarding PDC.
I didn't try to change something from there. 😊
@@BMWEMS my pdc is already not working i will check those on off setting :) thank you so much 🙏
You are welcome 😊. You can also check with ISTA+ to see if there are visible. Maybe is a bad connection somewhere.
Brooooo! Where do I get those apps for the computer? I don't know a thing about coding
Hi, basically you receive a part of programs when you buy the cable, if not you can search on Google what type of program you need. Here is a link from where I think you can found some programs www.bimmergeeks.net/downloads. If you don't know what you need, see my first video with: What you need to start BMW coding.
Its possible without leptop or pc ??
I think no, at least no without an device connected to OBD connector, because you need to change this from Radio memory. (from what I know there are also some device which are working with mobile phone, but I think the question is if is possible to do this from on board menu or something like this) 😊
I do the same thing, what he does and it works perfect thanks bro great Job
Thank you very much for your appreciation! 😊
Hello mate I've managed to get the coding for aux sorted but now I am having problem, my brake pad sensor is showing after playing about on ncs and I can't get it to go off, I am having the 5de1 and 5de0 error codes show.
Any help will be appreciated
Hi, I assume this errors has no connection with coding of the AUX since this are different modules. Maybe your service interval reached value 0 for break pad or you have an issue with brake sensor, maybe there is a bad wire connection or the sensor is damaged (can be damaged even if is looking good outside). First maybe you can try to reset service interval for brake pads (rear and front) and after that maybe in the second step you can check the sensor. 😊
I think it is down to me playing around on nscexpert not knowing what I'm doing😂 the service interval for the brake pads is showing _ _ _ _ _ and reset does nothing, think I'm just going to remove the brake pad sensors tbh 😂
Yes, I think is a good idea to check the sensor, you can also try to do an power on reset to the ECU (by removing and reconnecting one of the battery terminal), also you can try to reverse the changes, there is a procedure te recover default data in a module but with this procedure you will lose all configuration done until now 😁. But if you are seeing there - - - - when you are trying to reset the interval I assume is something wrong with the brake pad sensor. But is only an assumption. 😉
@@BMWEMS I have already disconnected negative terminal and I'm going to leave overnight, if this doesn't do the trick how would I go about reseting to default module as I've kinda figured out how to use ncs and would be able to code the aux back in. Thanks
I do not remember correctly the entire procedure but I will search on forums were I found this, but you changed only in RAD module, because I'm almost sure that this module will not impact the brake system, maybe only if you changed something in other module.
Hello
Do you have the sw available?
Hi, unfortunately I can't remember exactly from where I taked them, but you can try from here www.bimmergeeks.net/downloads
Que programa es?
Y como se conecta el estereo a la pc?
Hi, please see this: ua-cam.com/video/J5z3xtBHkys/v-deo.html here you can see what type of cable I'm using and also what applications.
Hello, I have the same problem but I don't understand it, can you help me please:(((((
Hi, unfortunately the only wey which I know is to enable it via diagnosis from sw.
is the program free for laptop ?
Normally you can receive it with the cable or if not, you can search on forums for this applications and I'm sure you will found some version for free. I received them with the cable.
Where do I plug the computer? Why didn't you explain that
Hi, please see ua-cam.com/video/J5z3xtBHkys/v-deo.html
For E90 passt ?
Yes, job is done on E 90 🙂
but did it work??
Yes it works, I have done this on my own car ! 🙂
the files are not available any more, could someone share them with me?
Which files you don't have?
@@BMWEMS When trying to load the chassis e89 (and specifically I need for e87) in ncs dummy, the option is not there. In the log it says that it has only loaded files for e39 and e46. Could you please upload your SP-Daten file for e89 to the onedrive? It should be in C:\NCSEXPER\DATEN. If it is not there then I don't think the tutorial will work for other people who need e89 etc - maybe putting a disclaimer in the description about this could help too. Thank you!
Hello, where to download this app?
Hi, you can check on this forum www.e90post.com/forums/showthread.php?t=1528803
How did you make the revtors NCS expert profile ?
Hi, I download it with ncs EXPERT application, but this was ~2 years ago so I don't remember the name of source, I sow something on this forum "mhhauto.com/Thread-Need-NCS-revtor-s-expert-profile" but I don't know what exactly is inside, maybe if you can't found it I will try to open it and tell you what is inside.
@@BMWEMS will it work on BMW 1 series 2007 e87 ?
@@zohaib445 yes, basically the BMW has almost the same modules on all cars, I think all series 1 and 3 has the same modules from 2005 to 2011 (sometimes there are small differences in the name, for e.g. FRM on older and NFRM on newest, but is the same module with some updates). In ncs Dummy you have there (e89) and under this you can see all cars which are included in this series.
so for my e87, I will choose the e89 chassis and frm ecu on NCS expert ?
@@zohaib445 yes and no, you will select e89, but depend on what you want to do you will select a different module. For e.g. in this video is RAD (radio) module selected to activate AUX, you can follow exactly the steps from the video an will work. You can see that in first steps you need to select a module from where ncs Expert to read some identification code of the car, there is the step where I selected FRM, but you can select each one you want form that list (there are only 3 modules on the list on my car).
Hi what program is this and what cable do I need?
Software are NCS EXPERT and NCS Dummy and I have an INPA bmw cable wich is connected to the OBD2 connectors of the car and to the laptop.
@@BMWEMS where can I get this cable from and what’s the link to this program?
Hi, I order this cable from internet (BMW INPA cable) and NCS expert and NCS dummy you can found them here :www.bimmergeeks.net/downloads
@@BMWEMS thanks so much
I have done this some times ago, but from what I'm remember you need booth of them, for SP daten you have all data for multiple BMW models. 🙂
Than You for Your time in creating these videos!
Thanks to You i started coding by own E87 and having so much fun with it :)
Thanks for your appreciation! I'm very happy that my video helps you! 😊
Very nice video btw very informative!
Thanks alot for your appreciation!
Holly molly thank you man, I love ya !
You are welcome!
Hi friend, Thank you and big respect for you
Hi, thanks a lot for your appreciation. I'm very happy to hear that my information helps you! 😊
C oubliger du mettre la valise pour activer aux
This is the only way which I know. :) I think unfortunately you don't have another option.
what you do to connect the laptop to the bmw?
Hi, I'm using an OBD2 diagnosis cable. And for coding I'm using NCS Expert and NCS Dummy applications. If you want you can see in my first video (ua-cam.com/video/J5z3xtBHkys/v-deo.html) what I'm using. Have a nice day. :)
I WANNA HUG U NOW THANKS SO MUCH
Friend can you share the PFL folder for profiles?
If you can send it to me by mail, I will take care of making a free online guide. thanx
Hi, sure, you can found the PFL foder in this link :
filebin.net/dnoyui6acga35oth
Muchas gracias, me sirvió
I’m glad you found it helpful! Your feedback means a lot to me. 😊
Ok can somebody explain to me why tf wouldn’t they enable this from factory
This is a good question, I think depend on the options of the car, but is not nice to have entire equipment and is only disabled 😁
@@BMWEMS i know Right
Thank you for your reply :)
Thanks you also for this conversation! 😊
Thank you!! Perfect
Worked on BMW E91 2007/4
First time i tried the software NCSexpert and NCSdummy.
(didn´t have exactly the same layout in mine NCSExpert) but with your movie it was easy! Thanks!!
Recommed!!
Hi Christoffer, thanks a lot for your appreciation. I'm very happy to hear that my video helps you! 😊
@@BMWEMS what do i have to download the ncs expert with inpa installation?
You can try this link to see if you will found exactly what you need www.bimmergeeks.net/downloads
hello thanks for the instructions it also works with a BMW 318 i E90 with BMW Business radio from 2006
Great. You are welcome and thanks for your feedback. :)
Thank you!!
You are welcome! 😊
Вкус Кам и маджыл?
Sorry, I can't understood your comment
Hi. I only have a file FSW_PSW.MAN in the folder WORK. I have not file FSW_PSW.TRC
Is interesting, you should have an TRC file, in that TRC file are read the data from the car when you do read ECU. Did you perform read of the ECU from ncs expert?
thx so much
You are welcome! 😊 Thanks you also for this comment!
lo puedes poner en español
Hi, unfortunately I do not know Español 😊
I have coding this but my quality is very Bad the CD Quality is much better
Hi, this may depend on your aux source and wire connections. To be honest, I do not know if quality is better than CD, but on my side for me was good.
I think its a 2006
Yes, it's e90 2005.
Hi
I’ve connected my car with inpa cable. The car is connected and i checked in inpa. When i load profile in ncs expert. Select chassi and frm. It gives me this error
FA-Fehler
COAPI-2000: Fehler in EDIABAS oder in SG- Beschreibungsdatei
BIP-0001: Zu langer Job- Parameter oder String-Register-Zugriff
FRM 87
COAPI-2000: Fehler in EDIABAS oder in SG- Beschreibungsdatei
FA READ
COAPI-2000: Fehler in EDIABAS oder in SG-Beschreibungsdatei
FA_READ: A_PL2FRX
My car is e87 2006
Hi,
I found this forum, seems that they solved by updating ncs expert, can you try this?
www.e90post.com/forums/showthread.php?t=618647&page=8
@@BMWEMS thanks for reply. I will try it
@@BMWEMS unfortunately I’m getting same error. I tried getting lates sp daten also. I checked in inpa in radio module and it says my aux is off. But I cannot connect with ncsexpert. Any help?
Can you connect ISTA+ with the car? Can you try this?
Boss info
I think this means is good 🤔
@@BMWEMS very good