Hi, to code Welcome light you need to have FRM 3 on the car (I can't remember if FRM 2 is accepting this feature). I will take this in to consideration for future. Thank you!
hi, i have one question from JP! how is working when indicater lights on? side marker will be off? Or side marker is always on, and indicater will switch on and off? thank you for your good video
Hi, I have a video about DRL and how to enable/disable it, this is working if your FRM module allow you to do this (e.g. if you have FRM3 ) ua-cam.com/video/5HnFQaR6mgg/v-deo.html
When you are selecting chassis like in minute 2:02 after that you need to select a module, after you select the module "FG" and "FA" are filled with something like in my video (minute 2:25)?
Hi, any question is normal ;), the light knob should be in first position or set to low beam (I assume also should work if is in auto, if the lights are on). So basicaly all the times when you have the lights on, also the front indicator lights will be on. If the light knob is on zero, this front indicator lights also will be off. 😀
Hi, to activate us lights you can do exactly what I'm doing in this video, if you have an good cable, you need only to have installed NCS EXPERT and NCS DUMMY installed on your laptop, you can found how to install this software on google.
Hi, yes, the direction indicators are working normally. Because is an software change they are not affected, basically they will be on and off normally.
To be honest I don't know if is working with other tools, I know how to do this only with NCS EXPERT and NCS DUMMY and with this cable www.ebay.com/itm/BMW-USB-OBD-K-DCAN-DIAGNOSTIC-CABLE-GT1-EDIABAS-INPA-DIS-SSS-NCS-CODING-ISTA-/401995097738
Here I found a guide on internet about how to install NCS EXPERT, I didn't try it, but maybe can help you bmwcoders.com/forum/bmw-gt1-ops-opps-inpa-24/bmw-inpa-ediabas-installation-guide-software-328/
bro my car lights were ON before and i turn them off because i need paper work for my car and now I'm trying so much to turn them ON again but it's not working . you know why they are not turning on again...??
Hi, by your lights you are talking about this sidemarkers, right? So did you try to put SIDWMARKERS on aktiv and also you set the PWM_SIDEMARKERS to a value different than 0?
i turn them OFF before and it works super good ... but now when I'm trying to turn them ON again they are making problem. maybe i have to wait sometime to turn them ON again , i mean not immediately
Thanks, i didnt pass the vehicle inspection with corners, great tutorial:)
Thank you! :)
Best explanation . Thanks man !
Thanks, I'm very happy to hear that my video helps you. 😊
@@BMWEMS Make more 🥰
Hola ¿Puedes hacer un vídeo enseñando como codificar el BMW e90 Para las luces de bienvenida?
Hi, to code Welcome light you need to have FRM 3 on the car (I can't remember if FRM 2 is accepting this feature). I will take this in to consideration for future. Thank you!
hi, i have one question from JP!
how is working when indicater lights on? side marker will be off? Or side marker is always on, and indicater will switch on and off? thank you for your good video
hi, unfortunetly side markers are always on, they are switch off only when lights are completly switch off. Thanks for your question :)
hello I would like to know how toi activate thé daytime running lights with the Key?
Hi, I have a video about DRL and how to enable/disable it, this is working if your FRM module allow you to do this (e.g. if you have FRM3 ) ua-cam.com/video/5HnFQaR6mgg/v-deo.html
What model should I choose for the Europe lights? FRM i don't have
Do you have E9x( E90,e91,..e87.) ? Because in all E9x this is the name of module
This has also name like NFRM or FRM 2 or FRM3 or something similar, can you see something like this?
When you are selecting chassis like in minute 2:02 after that you need to select a module, after you select the module "FG" and "FA" are filled with something like in my video (minute 2:25)?
thanks for your response, can I do it with SSS PROGMAN
to be honest I don't know. :)
Will this work on a Pre-Lci E87 116i?
Hi, I assume yes, I assume is the same module like on e90 😊
I know it's a stupid question but should the light knob must be in the first position or zero. Thanks from me you have a thumbs up.
Hi, any question is normal ;), the light knob should be in first position or set to low beam (I assume also should work if is in auto, if the lights are on). So basicaly all the times when you have the lights on, also the front indicator lights will be on. If the light knob is on zero, this front indicator lights also will be off. 😀
@@BMWEMS thanks for your reply 🙂👍
You are welcome! 😉
Thank YOU bro
Thank you to for your comment! 🙂
I dit it like in this video but nothing happend
This is strange. Please read your coding again and check if the settings were written
HELLO i have inpa end i want us light is bmw E 91 how i do please
Hi, to activate us lights you can do exactly what I'm doing in this video, if you have an good cable, you need only to have installed NCS EXPERT and NCS DUMMY installed on your laptop, you can found how to install this software on google.
I dont see no frm but i see nfrm?
same, either one works
Hi, NFRM is the same with FRM.
I HAVE THIS EDIABAS 6.4.3 - 6.4.7 GT1 DIS version 44 GTI DIS version 57 SSS Progman
ok. :)
will is pass mot?
Hi, unfortunately I can't understand the question, can you please give me more details?
In Romania it's illegal. I m not sure about UK,but you can check with google
@@BMWEMSmot-ul e în Uk ,itp ul nostru
Am înțeles, mulțumesc de explicație!
Hello bro, the direction indicators are working or not?
Hi, yes, the direction indicators are working normally. Because is an software change they are not affected, basically they will be on and off normally.
@@BMWEMS thanks man i will try today😃
You are welcome! 😁
@@BMWEMS another question, which version are you using NCS-Expert (mine is 4.0.1 and not the same :-( ) Thanks
Hi, mine is also the same (4.0.1), what is not working on your side?
I HAVE THIS CABLE K+DCAN USB Premium Diagnose Set K-Line und OTG für BMW
To be honest I don't know if is working with other tools, I know how to do this only with NCS EXPERT and NCS DUMMY and with this cable www.ebay.com/itm/BMW-USB-OBD-K-DCAN-DIAGNOSTIC-CABLE-GT1-EDIABAS-INPA-DIS-SSS-NCS-CODING-ISTA-/401995097738
Here I found a guide on internet about how to install NCS EXPERT, I didn't try it, but maybe can help you bmwcoders.com/forum/bmw-gt1-ops-opps-inpa-24/bmw-inpa-ediabas-installation-guide-software-328/
bro my car lights were ON before and i turn them off because i need paper work for my car and now I'm trying so much to turn them ON again but it's not working .
you know why they are not turning on again...??
Hi, by your lights you are talking about this sidemarkers, right? So did you try to put SIDWMARKERS on aktiv and also you set the PWM_SIDEMARKERS to a value different than 0?
@@BMWEMS yes yes i did everything but they're not turning on. i don't know why
This is really strange, and what are the value when you are riding the data from module? The value are still set?
in FSW_PSW.MAN file yes it's say active and wert 03
i turn them OFF before and it works super good ... but now when I'm trying to turn them ON again they are making problem.
maybe i have to wait sometime to turn them ON again , i mean not immediately
thanks
You are welcome.
ncs dummy where to download with english language ?!
Hi, www.bimmerforums.com/forum/showthread.php?1553779-NCS-Dummy-Taking-the-expert-out-of-NCS-Expert.
Hello dear teacher, you are good. Thank you for all your efforts. Can you give me your WhatsApp number so I can get guidance from you?
Hi, please ask questions here in comments, maybe our conversation can help also other people 🙂