I got the kit purchased from Fairway Ford and the SKB3J-19B532-AA number is on the bottom of instruction to install the kit. Fog light kit BC3Z-15200-BA. Planning on installing next week.
Can these type of knobs like this light switch be bought for the 2011-2016's and installed in the 2008-2010 Ford Super Dutys with the smaller switches? I would like to change my 2010 Super Duty switches to these larger type for my lights, auto 4wd, and the 12 volt port. Thanks.
I'm sorry, but I have no idea. My best guess would be no, unless it was aftermarket to be an upgrade to make it look like the newer one but fit in the existing spot.
I don't recall as it was a long time ago, but I know others have videos that explain FORScan much better than I do, that is why I didn't dive to deeply into it on my channel. I know when to let others do a better job teaching!
What if I want to install an original bumper( the one that have fog lights), can I plug the fog lights straight to the harness that is in my truck? Or i still need the harness?
@@CallMeColtLLC my truck is a 2020 f350, and the switch is a little different( newer stile) you think is going to be the same you did? Thanks for the response
@@juanr5806 2020 is the newer generation than this, so it's going to be different. I can't imagine the process will be a whole lot different, but wire harnesses, switches, and possibly enabling it in the Body Control Module would be different. Not sure if it would require the auto lamps sensor as well, if the newer trucks don't all have them.
I have an 2012 Xl that comes with the harness but no autolights. I received just the foglights as a gift Can i just get the harness for them to work or can i just tie them in with the yellow running lights?
Get the harness and the switch. If you put them into the circuit with the parking lights, it will cause issues with faults more than likely due to increased ampure draw.
@@CallMeColtLLC okay thank you 🙏🏻 I’ve seen online about the bcm and some people needing to bring it to the dealer. But from what your saying if i dont want the auto lights its just that simple
@@spencer2.032 If for some reason you needed to enable them via the BCM, you can get ForScan for free and a $15 USB cable and do it yourself, along with the ability to do many other useful things. If you have no heard of ForScan, look into it. Great tool to have and once you understand it, very helpful!
I found that part number SKBCSJ-19B532-AA to not be good, maybe out dated or obsolete. One they say will work is BC3Z-15200-BA for a 2015 F250 XLT. (COMPLETE FOG LIGHTS) I hope I am giving out good numbers. I will know more later, I ordered one from Fordparts.com and not received it yet.I did find it cheaper elsewhere. After I ordered. Good luck.
You would need to change the switch like I did but also add the light sensor on the dash. One of the others here in the comment showed a part number for the entire kit. I think it comes with the sensor, switch, wires, & fog lights. If you didn't want the fog lights, you'd need to get the other stuff all separate.
I got the kit purchased from Fairway Ford and the SKB3J-19B532-AA number is on the bottom of instruction to install the kit. Fog light kit BC3Z-15200-BA. Planning on installing next week.
Thanks again I installed the Ford Kit BC3Z-15200-BA. It works great. I did find out key must be in accessory or run mode.
Great to hear!
Thank you for the details and part numbers. It will help me with my xl
Great video, great detail, great help! Thank you!
Glad I could help.
Glad it helped you out!
Awesome video. Thank you
No problem 👍
Great Tips, Good Stuff 👍 Thanks!
You're welcome
I appreciate your video it’s just help me knock mine out on my 2019 f250
Cool!
Does this harness work for 2020 and what exactly did you have to buy
Can these type of knobs like this light switch be bought for the 2011-2016's and installed in the 2008-2010 Ford Super Dutys with the smaller switches? I would like to change my 2010 Super Duty switches to these larger type for my lights, auto 4wd, and the 12 volt port. Thanks.
I'm sorry, but I have no idea. My best guess would be no, unless it was aftermarket to be an upgrade to make it look like the newer one but fit in the existing spot.
Great job,
Great job on video bud.
Thanks!
I want to order this kit and some fog lights for my 2011 F250. What does the auto lamp do? mine doesn't have that.
Auto is so it will turn the lights on automatically when it is dark out.
what section in forscan is the bambi mode? what do you have to change it to?
I don't recall as it was a long time ago, but I know others have videos that explain FORScan much better than I do, that is why I didn't dive to deeply into it on my channel. I know when to let others do a better job teaching!
What if I want to install an original bumper( the one that have fog lights), can I plug the fog lights straight to the harness that is in my truck? Or i still need the harness?
If the wires coming off the bumper are there, go ahead and plug them in. You will still need to change the switch.
@@CallMeColtLLC my truck is a 2020 f350, and the switch is a little different( newer stile) you think is going to be the same you did? Thanks for the response
@@juanr5806 2020 is the newer generation than this, so it's going to be different. I can't imagine the process will be a whole lot different, but wire harnesses, switches, and possibly enabling it in the Body Control Module would be different. Not sure if it would require the auto lamps sensor as well, if the newer trucks don't all have them.
A set of Baja Design lights are about $300 and worth every penny. Ive tried so many cheap china led, they all sucked.
I'm happy with the Harbor Freight Tools ones. For the price, they do what I need them to do.
To get both the high beams and fog lights going to the body module and change the control to enable Bambi mode
I learned this after making the video. ForScan in a great tool.
I have an 2012 Xl that comes with the harness but no autolights. I received just the foglights as a gift Can i just get the harness for them to work or can i just tie them in with the yellow running lights?
Get the harness and the switch. If you put them into the circuit with the parking lights, it will cause issues with faults more than likely due to increased ampure draw.
@@CallMeColtLLC okay thank you 🙏🏻 I’ve seen online about the bcm and some people needing to bring it to the dealer. But from what your saying if i dont want the auto lights its just that simple
@@spencer2.032 If for some reason you needed to enable them via the BCM, you can get ForScan for free and a $15 USB cable and do it yourself, along with the ability to do many other useful things. If you have no heard of ForScan, look into it. Great tool to have and once you understand it, very helpful!
@@CallMeColtLLC sure thing, thank you
Does the f150 with out fog lights come with the existing wire beneath? Or just the 250
No clue. Completely different truck from the Super Duty.
I found that part number SKBCSJ-19B532-AA to not be good, maybe out dated or obsolete. One they say will work is BC3Z-15200-BA for a 2015 F250 XLT. (COMPLETE FOG LIGHTS) I hope I am giving out good numbers. I will know more later, I ordered one from Fordparts.com and not received it yet.I did find it cheaper elsewhere. After I ordered. Good luck.
It is possible the revised the part a bit since I made the video. Good update, thank you! Let us know if it works.
@@CallMeColtLLC I will let you know how it turns out, when complete.
@@hermanboyd3367 Any update with the new part number? Was it the right kit?
@@jonasj333 Yes it was the correct kit and it works great. BC3Z-15200-BA for a 2015 F250 XLT
How i can add autolights on my f350 2013
You would need to change the switch like I did but also add the light sensor on the dash. One of the others here in the comment showed a part number for the entire kit. I think it comes with the sensor, switch, wires, & fog lights. If you didn't want the fog lights, you'd need to get the other stuff all separate.
You rock!
Thanks!