Man... every day I find another one of your videos and learn something new again. I had to replace one of these marker lights on my 2018 F150... I ended up taking pretty much the whole mirror apart by following some other guy's video. So easy man...
Your supposed to feed the bulb wire adapters back into the light housing, and then seal the hole with the factory light bulb holders. As it is water, dirt, dust, ect will get into the housing and bulb sockets and either corrode or otherwise short everything out.
Super crazy that I just bought these last week for my F-350. I must say I plugged them in and didn't regret buying them. If you get these in the smoked out cab lights it literally changes the whole look at the truck.
After floor mats this was the second thing I did. Though my running lights on the mirrors are white and the turn/flasher lights are amber. Thinking about adding a light on the bottom side of the housing to have rear visual turn signals on the bottom of the mirrors. Mine are singular though not like the ones you have. Yours are better.
Thanks ARod for the cool mode to my 2015 F350 Platinum PStoke! Easy Peasy to install after watching your vid and tips. Thanks man and great job helping us out.
Pretty dope! I added some LED bulbs to mine (the orange colored ones) and tinted the lens with VHT Nite Shades. I did this for my cabs roof markers also
I've had these on my 11 for about a year and they are nice but I wish it would stay Amber on there running light. The white just looks off when on with the clearance lights
I just had discount tire install those same Cooper Discoverer AT3 XLT tires on my F350 this past weekend. Love them. They are so much better than those stock Michelen AT2s
I have these on my truck, but they are the Morimoto ones and one burned out in about 2 months, they are on back order until May…..looks like I’ll just buy these to hold me over until my warranty replacement comes in.
I have a 16 F250 and the ride is hoppy on the freeway or regular roads. I bought Bilstein 5100, I lower my tire pressure and installed Sulastic Shackles. Thinking it would ride better. My coworker has a 2020 F250 and it rides very stable and doesn’t hop like mine. I need help 😣
Good stuff, thanks for the how to. Do you have any videos on repairing the mechanism for the mirrors? My 2011 won't telescope anymore and has gotten much slower for folding. I would like to pull mine apart and see if it needs replaced or maybe needs lubed up?
Purchased these and installed them on my 2015 F350 couple months ago. They hyper flash and they flash from white to amber erratically when I use the turn signals. Need to install resistors for each mirror but not a lot of room and no place to mount the resistors, unless I trace the wires back into the truck its self. Another words these are a pain in the ass to get them to work correctly. So for now I just have the running light plugged in, so its white all the time and no flashing amber when I use the blinkers.
@@PowerStrokeTechTalkwARod I just purchased these from your link due to your video. Does the above comment mean their not plug and play or will I need more parts? Great videos, keep them coming.
I just installed these and there junk. They work fine when the truck is not running but after starting the engine they no longer work and only 1 segment flashes when signals are on. Im going to return them and see if the next pair works.
I'm not sure if this is the right place to ask this question. Is it possible to put F350 overload Springs bump 350 stops on a F250? If this is not the place to ask this question could you point me in the right direction. This is on a 2022 Thank you
Ford recently did a recall on the 2019 Super Duty truck for the DRL being to bright. I took my truck in for service and the dealer added the recall to my service and now the DRL are much dimmer. Does you know how to make them bright again?
This is off topic Arod but I know you are the man to ask. Is running cetane boost in your power stroke a good idea ? I do know that Ford actually sells it so I can only assume that Ford wants us to use it. Will it make your truck regen less ? I just don’t know why we need it. Please help, thanks.
Motorcraft cetane booster was on sale at my local dealer parts counter, check yours, $8.99 for 20oz bottle beats anyone on the net. My local performance shop recommends Stanadyne as well.
@@PowerStrokeTechTalkwARod I agree, some things that Ford does is absolutely incredible, other things are better left to the private community. But I do still like the OEM look, fit and finish as much as possible.
I just bought the same brand but the triple row for my 15 and they will be sequential when key on but when the truck is running only the front leds flash amber and ideas?
I have the recon lights similar to these except they’re completely white, anyhow. I can’t get the running light feature to work. Any idea? I tested all my wires with a multimeter and all wires have power. Any help would be greatly appreciated!
@ They’re brand new so I’m not sure why they’re not working properly I have the amber set as well and they’re the same way. I’ve flipped the wires and still nothing
I just installed some morimoto LED markers on my truck today, they look great. Does anyone know what the part number is for the rubber weather gasket that goes around the bulbs ? Mine are both cracked and about to fall apart.
After reading some of the comments below now I’m worried that they’re not plug and play. Will these need some type of resistors to make them compatible with my stock system??? I used your link and ordered them already but I’ll cancel if not plug and play. Thanks in advance. Keep the vids for this mod year coming. 👍🏼
I just tried installing them on my 2012 and they didn’t fit. I’m thinking they are defective or something because they almost fit. I tried for 30 mins. Yes, I tried the other one just to be sure. There’s a small tab that aligns when you’ve got the correct one on the correct side.
Did this mod about 6 months ago, now the right mirror turn signal stopped working. Parking lamp works, all lamps on left mirror work. Tried a regular bulb on right mirror, still does not work. Any clue as to next steps?
Gotten 2 pairs of these suparee lights, neither pair worked right. Fit up just fine, clipped in serurely, blinker didnt work right on either pair. Woukd glitch and flash white for a few seconds before going back to blinking orange.
Man... every day I find another one of your videos and learn something new again. I had to replace one of these marker lights on my 2018 F150... I ended up taking pretty much the whole mirror apart by following some other guy's video. So easy man...
Your supposed to feed the bulb wire adapters back into the light housing, and then seal the hole with the factory light bulb holders. As it is water, dirt, dust, ect will get into the housing and bulb sockets and either corrode or otherwise short everything out.
Good thing it was a prop....
Good tip!
Super crazy that I just bought these last week for my F-350.
I must say I plugged them in and didn't regret buying them.
If you get these in the smoked out cab lights it literally changes the whole look at the truck.
Awesome!!!!
I love it I know I’m 2 years late but I am going to buy these right now and get them installed. Mine don’t even work right now!
That really adds some coolness to the truck. Looks really sharp.
After floor mats this was the second thing I did. Though my running lights on the mirrors are white and the turn/flasher lights are amber. Thinking about adding a light on the bottom side of the housing to have rear visual turn signals on the bottom of the mirrors. Mine are singular though not like the ones you have. Yours are better.
I bought these after watching this. Cool cheap upgrade. 😎
Thanks ARod for the cool mode to my 2015 F350 Platinum PStoke! Easy Peasy to install after watching your vid and tips. Thanks man and great job helping us out.
Pretty slick lil upgrade
Pretty dope! I added some LED bulbs to mine (the orange colored ones) and tinted the lens with VHT Nite Shades. I did this for my cabs roof markers also
I have those same ones and they are amazing
These are exactly what I was looking for!~ Thanks ! JUST ORDERED!
I've had these on my 11 for about a year and they are nice but I wish it would stay Amber on there running light. The white just looks off when on with the clearance lights
I just had discount tire install those same Cooper Discoverer AT3 XLT tires on my F350 this past weekend. Love them. They are so much better than those stock Michelen AT2s
Great job sir. Those are neat lights!
I have these on my truck, but they are the Morimoto ones and one burned out in about 2 months, they are on back order until May…..looks like I’ll just buy these to hold me over until my warranty replacement comes in.
Can't wait to do this mod on my 2014 350 lariat
Nice lookin truck even nicer now
Ordering! To cool, thanks. Keep them mods coming
Just ordered a set. Thanks for the great work you do!
Awesome
Those are pretty dope. My Ebays just burnt out on me too.
Wow those are nicer then the putco's l have in. Thanks ARod
Pretty slick.
Love those! Another great video, thanks!!!
I have a 16 F250 and the ride is hoppy on the freeway or regular roads. I bought Bilstein 5100, I lower my tire pressure and installed Sulastic Shackles. Thinking it would ride better. My coworker has a 2020 F250 and it rides very stable and doesn’t hop like mine. I need help 😣
Get rid of the Bilsteins and go with Fox 2.0s.
I wonder if these would be legal in places with the white lights on? I'd sooner just have it amber the whole time. Wonder if they do have that option?
Check em out
Good stuff, thanks for the how to.
Do you have any videos on repairing the mechanism for the mirrors? My 2011 won't telescope anymore and has gotten much slower for folding. I would like to pull mine apart and see if it needs replaced or maybe needs lubed up?
No i dont. There r no serviceable parts thru ford...ud have 2 replace..
Cool upgrade 👍🏼
Nice where did you pick those at ?
Read description...
Do you have a good led clearance lights set to recommend for my '16 f250? Thanks for all the great work!
Recon maybe...
Pretty cool bud.
Nice job
That's is pretty cool!
Purchased these and installed them on my 2015 F350 couple months ago. They hyper flash and they flash from white to amber erratically when I use the turn signals. Need to install resistors for each mirror but not a lot of room and no place to mount the resistors, unless I trace the wires back into the truck its self. Another words these are a pain in the ass to get them to work correctly. So for now I just have the running light plugged in, so its white all the time and no flashing amber when I use the blinkers.
Forscan & IDS ur best friends pal....🤷♂️
@@PowerStrokeTechTalkwARod I just purchased these from your link due to your video. Does the above comment mean their not plug and play or will I need more parts?
Great videos, keep them coming.
@@PowerStrokeTechTalkwARod will I need the Forscan & IDS you mentioned to make these work??? Thanks in advance.
No but to fix hyper flash yes
I just installed these and there junk. They work fine when the truck is not running but after starting the engine they no longer work and only 1 segment flashes when signals are on. Im going to return them and see if the next pair works.
Thanks very well how to do. Thanks
I'm not sure if this is the right place to ask this question. Is it possible to put F350 overload Springs bump 350 stops on a F250? If this is not the place to ask this question could you point me in the right direction. This is on a 2022 Thank you
Yea. You shld have juss order the high capacity tow package in ur 250 & u wlda been all set
Ford recently did a recall on the 2019 Super Duty truck for the DRL being to bright. I took my truck in for service and the dealer added the recall to my service and now the DRL are much dimmer. Does you know how to make them bright again?
Forscan
@@PowerStrokeTechTalkwARod ok I will have to buy one. Thanks brotha
This is off topic Arod but I know you are the man to ask. Is running cetane boost in your power stroke a good idea ? I do know that Ford actually sells it so I can only assume that Ford wants us to use it. Will it make your truck regen less ? I just don’t know why we need it. Please help, thanks.
Yes brother you need to add it at every tank Look up on Google what it does it is very important
Motorcraft cetane booster was on sale at my local dealer parts counter, check yours, $8.99 for 20oz bottle beats anyone on the net. My local performance shop recommends Stanadyne as well.
I'm over the Motorcraft stuff. Use our code PTT on Hotshot Secrets site
@@PowerStrokeTechTalkwARod I agree, some things that Ford does is absolutely incredible, other things are better left to the private community. But I do still like the OEM look, fit and finish as much as possible.
What should I do if the sequentials only works when I turn hazards on while truck is off
Good luck 👍
Good Stuff, Great Tips👍🏿😀
Do they make these for a newer truck? I have a 2019 superduty
Not sure bud
Damn I tried looking for them but only came back to the ‘11-‘16
Did my 14 lariat. Awesome tyvm
What would cause the hyper flash with all halogen bulbs and all working?
Ahh bulb out
@@PowerStrokeTechTalkwARod but every bulb is working and it don’t hyper flash all the time.
There HAS to be a filament that is got to be bad
I just bought the same brand but the triple row for my 15 and they will be sequential when key on but when the truck is running only the front leds flash amber and ideas?
Havent a clue....
Do you know if they make that for a 2018 F450
Ya
I have the recon lights similar to these except they’re completely white, anyhow. I can’t get the running light feature to work. Any idea? I tested all my wires with a multimeter and all wires have power. Any help would be greatly appreciated!
Garbage lights that's y
@ They’re brand new so I’m not sure why they’re not working properly I have the amber set as well and they’re the same way. I’ve flipped the wires and still nothing
Do these hyper flash?
No
@@PowerStrokeTechTalkwARod ok cool gonna order then, no morimoto $100 mirror lights hyper flash
I just installed some morimoto LED markers on my truck today, they look great. Does anyone know what the part number is for the rubber weather gasket that goes around the bulbs ? Mine are both cracked and about to fall apart.
No
After reading some of the comments below now I’m worried that they’re not plug and play. Will these need some type of resistors to make them compatible with my stock system???
I used your link and ordered them already but I’ll cancel if not plug and play. Thanks in advance.
Keep the vids for this mod year coming. 👍🏼
@@AkJohn74 How do you download the program and where can I get it? Thanks in advance.
I just tried installing them on my 2012 and they didn’t fit. I’m thinking they are defective or something because they almost fit. I tried for 30 mins. Yes, I tried the other one just to be sure. There’s a small tab that aligns when you’ve got the correct one on the correct side.
I've done several have had no issues....
Did this mod about 6 months ago, now the right mirror turn signal stopped working. Parking lamp works, all lamps on left mirror work. Tried a regular bulb on right mirror, still does not work. Any clue as to next steps?
Gotta pin point test those circuits.
The guy that owns that truck either has a bulb out or needs some forscan to stop that hyper flash. But I really like those side markers. 👍
Bulb out
Fix it then for the video!!!!! 😆
Gotten 2 pairs of these suparee lights, neither pair worked right. Fit up just fine, clipped in serurely, blinker didnt work right on either pair. Woukd glitch and flash white for a few seconds before going back to blinking orange.
No probs here
@@PowerStrokeTechTalkwARod when truck is running they glitch, it's due to the 14 volts
That doesn't make sense
Anyone have problems with figment? Mine aren’t going in as easy
First fix that hyper flash so embarrassing. Then read instructions the wiring gets put back inside.
Any 2008 Content?
Nope, very little. All in playlists
Ordered 2 sets and both of them don’t fit at all
Man I love your videos.
I was going to order a set of these until I saw “MADE IN CHINA”!
Anyone make a set of these in AMERICA!? 🇺🇸🇺🇸🇺🇸
Thanks pal......😔 i knw
Why is the sequential so fast? Looks cheap.
Guy had a bulb out, that's why
The reviews on these are terrible!
So ive heard