Honda Pioneer 1000/1000-5 Alignment with SuperATV Arched A-Arms
Вставка
- Опубліковано 21 жов 2024
- T-shirts, hoodies, long sleeve shirts, mugs, and stickers available here:
teespring.com/...
Join the Riders on
facebook: / appalachianmountainriders
Instagram: / appalachianmountainriders
Twitter: / appmountriders
Support my channel and get access to exclusive content by becoming a Patron:
/ appalachianmountainriders
My Patreon Supporters:
Mike B.
Jeremy W.
Jacob B.
My Gracious Sponsors:
hondasxs.com/
Some of the links above may be affiliate links that I receive a small commission from. This helps support my channel and enables me to continue to make enjoyable quality content.
Thank you for showing the internet this simple method and not using any high priced specialty tools.
I’m too cheap for all those tools…lol. Amazing what you can do with a tape measure!😁
As I pioneer 1000 owner who has beat the living hell out of my sxs all over alaska I love your videos!
Greetings from Warren county,pa.I just bought a pioneer 700-4 and I love it. It's good to see good videos like yours for good info.
I bought a Champion Dual fuel generator. The DB level is 72db. I ran gas during the day. Then when it ran out, I would turn the knob to propane. press the button and go to sleep. No pouring gas in the middle of the night.
Generator....my Dad bought a Harbor Freight (Predator) 7 give or take years ago now that they use to run the entire house when the power goes out (a couple of times a year). We also use it to run tools, lights, etc out by the gun range or at various places around the property when the need arises. It comes in handy, but it isn't a highly used piece of equipment for us either. No trouble with it. It works and is SIGNIFICANTLY cheaper than the Honda. Probably burns more fuel and is louder than what the Honda would be. That said I have a honda snowblower and lawn mower and honda powered pressure washer and all honda atv's/dirt bike's/sxs so I could definitely appreciate if you went Honda. Just one guy's experience for what it is worth.
I’ve been eyeing up a predator actually. You can get a 3500watt (the minimum we need to run everything) for less than what a 2800watt Honda or Yamaha generator would cost. Might have to check them out more closely now. Thanks for sharing!
Good video. Gotta do a arms soon
and as a follow up to the first question, why the A-Arms vs. wheel spacers??
Thanks for this video!!
May be a stupid question but how did you find the center point?
Excellent video
I need to do it
Honda by far is the best however I’ve learned in the 15 years off running a small engine repair shop and working on all kinds off generators I’ve learned what’s the top generators are. So with that said I bought a Briggs n Stratton generator they to are made in Japan so my advice is anything made in Japan you’ll be happy man. Lots off cheap Chinese junk out there cheap n don’t last rings bearings ect are made from junk metal melted down appliances just my opinion and they do vary hope this helps happy trails from West central Pa
hope atv dealer repair work or upgrade are as efficient as you.... Wa La
My wife pre-watches something we DVR...no big deal. I pre-watch something we DVR...I'm in trouble. Just the way the world works.
The non-Bluetooth Ryobi 2200 watt generators are awesome and half the price of the Honda. (I have both versions of the Ryobi and the Honda 2200. I prefer the Honda) 2 with the parallel kit will run 2 single AC campers at the same time unless both AC units come on at exactly the same time. One by itself will run a single AC camper if you trick it by running the microwave and starting the AC right when it goes off. (Starting the AC compressor requires a ridiculous amp load)
Good job 👍
Did the arms give you more clearance? If so, how much did it raise? I'm asking because I'm running into the same thing as you on fitting inside a toy hauler. I've got 28" tires on mine a I get a little rub on left hand turns and was looking for something to stop that.
Todd L the Superatv a-arms don’t increase the ride height any. They are just forward swept 1.5”. They should take care of the rub with no additional increase in height!
Think you are going to have tie rod problems when adding this angle?
Lots of people have been running these arms for a while and have had no issues with the tie rods. That's with a lot of them running 30"+ tires!
Are you still running the stock steel wheels
I was but the inside of the rim will rub on the a-arms BAD if you don’t have spacers. I manage to get a good deal on some 14” stock deluxe rims and that should take care of the problem.
Super girl > Wonder Woman > Bat Girl .... (Super) Natural talent > Tools of the trade
I have a 2016 pioneer 1000-5, and the a arms are welded, how am I supposed to align it?
You can only align the toe angle with stock a arms, the camber angle is not adjustable. The arms in the video are aftermarket.
just watching you clip here and you asked about a gen set!! I have a 35 foot toy hauler and I am running a 2400 yam inverter and it at it max out with the A/C on. I also have a 3000 watt the works great with running everything. I like you videos as I am 1000 owner also so keep putting them out. Mike Alberta Canada
I ended up getting a 3500 watt harbor freight generator at it works great!
My opinion would be that you appropriately previewed a modern movie in order to ensure said movie did not contain any offensive content prior to sharing it with your bride and son.....Right??????
whats the tallest wheels for p500 without changing the stock wheels and running gear ?
PREDATOR 3500 SUPER QUIET YOU GET THEM AT HARBOR FREIGHT I HAVE ONE AND I MUST SAY I LOVE IT BANG FOR YOUR BUCKS
That is what I ended up getting. Been using for two years going on three now and it’s awesome!
Old video but...I was gonna say yeah the predator as well. Excellent price and high quality. I change the oil once a year. Been going 4 years strong and still on the original battery.
That’s what I ended up getting!
I would buy a Honda
At least your wife (telisa) helps you a bit with your sxs work. My wife (lauren) could care less about the work being done to it.
All the time. Haha. I watch movies well before the wife. Just dont tell her before you watch together if its something she might wanna watch too. Im sure you know if she would watch it or not. At least i do.