I always like to tap bearing in first a ways before using a press , if it starts going sideways its too late when using a press , not as much control when starting off with a press , especially soft Can Am aluminum spindles , theres no room for error , helps if ya freeze bearing too
Hi there, Where can I get the PROPER tool for greasing my 2018 pioneer 1000. Have ordered two already from Amazon and in both cases, the tool is too small to fit over the axle but OK in the bearing bore...Pls help..
What are your thoughts on the use of anti seize, in this video ua-cam.com/video/cCNQqRD5WMg/v-deo.html they recommend reducing the torque from 20-30% when using anti seize.
There is nothing wrong with antiseize but you really don't want to put it in places that you really don't want a faster backing off, ie lug nuts, brake caliper brackets, or suspension pivot points. As far as the torque I've always heard drop 5% but who knows that's probably one of those "old wives tales" situations. I usually follow the torque spec regardless of antiseize or loctite ans havent had an issue.
I have drilled and installed grease fitting on both top and bottom arms.it really helps the bushings to last better.
I always like to tap bearing in first a ways before using a press , if it starts going sideways its too late when using a press , not as much control when starting off with a press , especially soft Can Am aluminum spindles , theres no room for error , helps if ya freeze bearing too
Thanks for sharing, very useful! Looking forward to more of your videos.
Great video 😊
Where can I get the wheel bearing Gresser that would fit on m'y Honda Pionnier 1000 2017
What is the part number for the bearing?
🏆🏆🏆👍🇺🇲🙏
SUBSCRIBED
Thank you for sharing
What size is the grease tool for front and rear wheel bearing
40mm od
Hi there, Where can I get the PROPER tool for greasing my 2018 pioneer 1000. Have ordered two already from Amazon and in both cases, the tool is too small to fit over the axle but OK in the bearing bore...Pls help..
tiger tool 40 mm works on mine perfect , goes over axle have one o ring and seals perfect , 2017 pioneer 1000
What are your thoughts on the use of anti seize, in this video ua-cam.com/video/cCNQqRD5WMg/v-deo.html they recommend reducing the torque from 20-30% when using anti seize.
There is nothing wrong with antiseize but you really don't want to put it in places that you really don't want a faster backing off, ie lug nuts, brake caliper brackets, or suspension pivot points. As far as the torque I've always heard drop 5% but who knows that's probably one of those "old wives tales" situations. I usually follow the torque spec regardless of antiseize or loctite ans havent had an issue.