2017 and up, the catch can is built into the PCV valve assembly. Look in the service manual. The oil drips into a baffle plate, then returns to the oil pan. Mazda already figured it out.
Hello, was the assembly updated for 2014 BM SkyActiv engines also? Looking to replace it on mine with PE01-13-570 while doing intake and valve carbon cleaning...
I installed a catch can a while ago on my Mazda 3, there are kits but they had the hoses running all way round engine bay. Glad to see you installed exactly as I had. Worth checking the hoses behind the manifold in a bit as the rubber on mine relaxed and started leaking a little on PCV side.
13:05 This would be a good location to put in a T-junction for valve cleaning. The down part of the T branches to the catch can, the top part connects a cleanout port with the intake manifold. The cleanout port should have a straight shot into the intake manifold without a bend. Use the cleanout port to shoot in your favorite GDI cleaners such as CRC GDI IVD Intake Valve Cleaner or Seafoam. Do the cleaning before each oil change and that may keep your valves clean. Cap the cleanout port after shooting the cleaner to prevent vacuum leaks.
Peace, mercy and blessings of God A beautiful and useful channel for Mazda owners, and you have good skill in maintenance, I am one of your followers in the Kingdom of Saudi Arabia, and I have published your channel widely here in order to benefit from your experiences, and thank you for everything you provide 💐🌹
Surely the point is to prevent oil vapour getting into the inlet manifold, the way it's done on tuned old school Ford engines is to block off the hose to the inlet manifold and then run the the hose our of the catch can into a small air filter low down in the engine bay, known as "venting to atmosphere", which is technically an emissions violation, but not actually tested by anyone anywhere.
Great vid Felix! What a co-incidence. I just got all my items and about to install. Your vid has saved me lotsa time for cracking my head where to mount the tank! Thanks. Btw, I got myself a Carbing oil catch tank and Samco 10mm hose. All fake stuffs btw. LOL.
Hahah yeah it took me sometime to figure this mounting area . So it looks sorta oem. Its all good as long it does the job. Should be alright. Mine is a copy of MshMoto. Hehe.
Hi, so I followed your other video on cleaning intake valves. Great video it helped me a lot I replaced the pvc valve with a new one and added a oil catch can on my 2016 Mazda CX-3 at 68k. The catch can has baffles, I paid almost 400 usd with shipping, My question is, how long, how many km before I start to see oil collected? Keep the videos coming 👍
Well done Felix. Been waiting for this vid. maybe you can do a follow up vids on how well the catch can performs, I'm curious how much oil got trapped.
I would probably fit the oil catch can to the right side somewhere in between the battery and head lamp. I'm getting old and stretching all the way back to the firewall to work on something gives me a pain in the back. Especially if you'll need to check the oil catch can periodically.
Hehe , Yeah definately possible to mount near by the battery / air intake area for easier access. Otherwise with mine one its just sometimes a pain to get to due to minimal working space.
How many times did you need to drain the oil catch can , how often and how much? Indonesia has hot humid weather just wondering thanks! Keep the videos coming. I'm a fan and subscriber.
Muchas gracias amigo por este video,trataré de comprar el kit ,ahora a esperar que subas el vídeo de cuánto aceite acumula el oil catch can y en cuántos kms.
isn t it easier to connect the oil catch can inbetween the hose that you detached first ? the one on the top that connects the camshaft cover to the intake ?
so in this video we r installing OCT kit to prevent carbon build ups within the intake. If you were to attach OCT kit to the rocker cover breather hose it would rather do things differently maybe cleaner TB port instead of preventing the intake valves from carbon build up.
question, my mazda 6 have a oil where the pcv valve is in, can you tell me the name of the little black box the pcv valve is plug into? the gasket on mine is worn it seems causing me to leak engine oil
Hi Felix, sorry again for one more question because I am plan to install OCC to my '21 cx5 so I would ask the expert like you to make sure I will do it correctly because I have never done it myself. Is it correct that you connected input(occ) to pcv and output(occ)to air intake manifold? In order to do that you have to took out factory tube that came connected from pcv to air intake manifold? Lastly, there is no other tubes that left open that needs to plug it or seal in close? Thank you very much :) I am appreciate you advice!
Hi, May I ask you...Do you know if your engine size vs. 2021 cx5 2.5 cc. NA (I have 2021 NA)are the same layout? Also am I correct that you connected input(occ) to pcv and output(occ)to air intake manifold? So in order to do that you have to took out factory tube that came connected from pcv to air intake manifold? Lastly, So there is no other tubes that left open that needs to plug it ? Thank you very much in advance.
you should try installing one as i was surprised what i caught there, i just did another basic service after 5000kms ive collected a good amount approx 60 ml to 70ml of oil.
Thank you for uploading the video. I am in the process of installing a catch can on my CX9, 2.5 turbo. I noticed the inlet on the intake manifold is the same. Not sure about PVC outlet. Please let us know how much oil you capture in the can. I have 53kilo on my CX9 already.
Thanks bro seller nya ini Beli Elbow nepel selang 1/2 x 3/8 drat luar elbow hose kuningan tokopedia.link/zGDTx9eepgb di toko distributor pneumatic Rp25.850
@@oaog7 hi , ive post short video about it . I have not got any issue or leaks whatsoever on it. still running it without any problems. ua-cam.com/users/shortsUVLjdQswD2c?si=XyUp_hpG5cmiFsNV
@@xdejablu3x or you can find small piece of reducer tube from 3/8 to 1/2 just attach small piece of tube coming from the pcv then add the reducer to it the use 1/2 hose up top.
@@FelixDanGarasiAuto I'd have to buy a 1/2 hose regardless because I currently have only two 3/8 hoses on hand. I'll keep it in mind though for future projects. I'm just going to return the hose for a 1/2. I never ran a oil catch can with two different hose sizes before. Hopefully no issues arise with pressure on two different hoses.
Felix Dan hi I have mazda 6 year 2016 . Where is the transmission oil pressure sensor located ? And also what is the difference between the pressure sensor and pressure switch.? Thank you sir.
Great video I have a few questions (my tb is at the front in mine 2.2d . Firstly where did you get the torque specs from ? (A manual maybe ? If so which one ) . 2nd what was it running like before you done the intake clean? I have so much more to remove as my air intake goes to the turbo which is cooled then the tb/intake . Great mode many say its a good thing and I'm sure my pcv (which I'm guessing it's connected to - not taken all video in yet due to kids lol) I'm sure my pcv is at the rear left of the exhaust pressure sensor
nope not possible. The PCV system allows for cleaner exhaust, prevents blowby at seals and gaskets, removes crankcase gasses generated by the combustion process that will sludge up and destroy the engine if left unchecked, and allows the engine to run more efficiently thus creating better fuel mileage.
i just checked i caught about 10ml. just done about 3500kms since the install. not many . i found a small leak on my fitting had to retighten it. i will do another post once reach to 5000ks for my next service. :) stay tune.
@@taichihead42 very much identical. Well many users also dont mind not having oil catch can added to their car which is fine. Just use a good fuel and service your car regularly with good engine oil will be just fine. But if you want to add one like on this video you can do it too so you get a peace of mind that the intake valves are not caked up with carbons as before without oil catch can.
Hello Felix , I am planning to buy a Mazda cx5 petrol 2.0 skyactiv engine manual transmission how would you rate this car ... i have seen a lot of your videos and subscribed to your channel ... please can you give your opinion or suggestion on this model would highly appreciate it .. Thanks
@@absonndlovu2923 PO442 you have a leak somewhere within the P0442 could be anything in the evap system: loose/faulty gas cap, purge solenoid, vent solenoid, charcoal canister, vacuum leak in any of the many hoses.
i just checked and im surprised it collect some oils within the catch can. :) i can confirm it is working as it should be. i Will do a follow up video for us.
i dont think this is the proper way to do it, the catch can is suppose to be lower than the pcv valve, i know this because i have catch can on my mazda 3 and bmw and it science that the the oil in the pcv cannot travel upwards
@@oktaviowibisono8379 bisa potong sedikit 2cm selang yg aga kecil diameternya buat nge ganjel adapter di pcv valve nya. Jadi pas masuki selang 0.5 inch bisa di clamp dengan padat. Soalnya memang aga kecil ukuran pcv valvenya. 2500 cc sama pcv nya sperti 2000 cc.
You did it Felix!!!!!! Thanks for uploading the video, please don’t forget to update us with results on oil accumulation on catch can.
Take care....
You r welcome. Yep i will update again once i reach another 1000ks.
@@FelixDanGarasiAuto hello Felix any update about oil accumulation on catch can ?
@@amnon3267 will update soon. Just have to get more kms.
Any update?
@@suciul will make update soon on this :)
2017 and up, the catch can is built into the PCV valve assembly. Look in the service manual. The oil drips into a baffle plate, then returns to the oil pan. Mazda already figured it out.
cool glad they fixed tht issue ;)
Hello, was the assembly updated for 2014 BM SkyActiv engines also? Looking to replace it on mine with PE01-13-570 while doing intake and valve carbon cleaning...
Really ?. Cool. Do you know where I can find that info ? I don't a service manual.
I saw a video where someone removed it and shows that not 100% of the oil is catched and some of it makes its way to the intake
@@VictorGarcia-gy8yvthat’s better than nothing
I installed a catch can a while ago on my Mazda 3, there are kits but they had the hoses running all way round engine bay. Glad to see you installed exactly as I had. Worth checking the hoses behind the manifold in a bit as the rubber on mine relaxed and started leaking a little on PCV side.
Will do. Thanks bro.
13:05 This would be a good location to put in a T-junction for valve cleaning. The down part of the T branches to the catch can, the top part connects a cleanout port with the intake manifold. The cleanout port should have a straight shot into the intake manifold without a bend. Use the cleanout port to shoot in your favorite GDI cleaners such as CRC GDI IVD Intake Valve Cleaner or Seafoam. Do the cleaning before each oil change and that may keep your valves clean. Cap the cleanout port after shooting the cleaner to prevent vacuum leaks.
True that and noted.
I couldn't find a video for a 2013 Ford Focus se. I'm so glad I stumbled onto this!
Thank you i really appreciate it :) Glad this video helps many car owners.
Peace, mercy and blessings of God
A beautiful and useful channel for Mazda owners, and you have good skill in maintenance, I am one of your followers in the Kingdom of Saudi Arabia, and I have published your channel widely here in order to benefit from your experiences, and thank you for everything you provide 💐🌹
Thank you brother. I Really appreciate that :)
Surely the point is to prevent oil vapour getting into the inlet manifold, the way it's done on tuned old school Ford engines is to block off the hose to the inlet manifold and then run the the hose our of the catch can into a small air filter low down in the engine bay, known as "venting to atmosphere", which is technically an emissions violation, but not actually tested by anyone anywhere.
yeah ive heard about venting to atmosphere. Installing OCT kit just make it cleaner for the environment. 😁
I like your custom made bracket!
Thanks man. Appreciate that :)
I wonder if this bracket works on mazda 3
@@Babyvipe it should work. Just trace it with a piece of paper and get it made up. :)
Great vid Felix! What a co-incidence. I just got all my items and about to install. Your vid has saved me lotsa time for cracking my head where to mount the tank! Thanks. Btw, I got myself a Carbing oil catch tank and Samco 10mm hose. All fake stuffs btw. LOL.
Hahah yeah it took me sometime to figure this mounting area . So it looks sorta oem. Its all good as long it does the job. Should be alright. Mine is a copy of MshMoto. Hehe.
Pak Felix, kalau senggang dan sempat mhn share cara cleaning catalytic converter dan purging injector Pak 🙏.
Agak langka untuk mazda tutorial nya
ok nanti di usahakan ya
Hi, so I followed your other video on cleaning intake valves. Great video it helped me a lot
I replaced the pvc valve with a new one and added a oil catch can on my 2016 Mazda CX-3 at 68k. The catch can has baffles, I paid almost 400 usd with shipping,
My question is, how long, how many km before I start to see oil collected? Keep the videos coming 👍
Nicely done , i would just check it every 5000kms or empty every oil change.
Well done Felix. Been waiting for this vid. maybe you can do a follow up vids on how well the catch can performs, I'm curious how much oil got trapped.
Cheers. Yes i will do follow up review on this catch can.
I would probably fit the oil catch can to the right side somewhere in between the battery and head lamp. I'm getting old and stretching all the way back to the firewall to work on something gives me a pain in the back. Especially if you'll need to check the oil catch can periodically.
Hehe , Yeah definately possible to mount near by the battery / air intake area for easier access. Otherwise with mine one its just sometimes a pain to get to due to minimal working space.
this mans mazda is going to last to a million miles
hehe yess definately . Still going strong here .
I wish people would state the model year they are working on & the milage it's at.
2013 mazda CX 5 . About 40k or more kms
How many times did you need to drain the oil catch can , how often and how much? Indonesia has hot humid weather just wondering thanks! Keep the videos coming. I'm a fan and subscriber.
i empty the oct every oil change / 5000 to 6000kms.
Awesome videos thank you. 2nd time watching one of yours so I made sure to subscribe!
😀 thank you very much appreciated.
cool
I like the way you work on your car. Meticulous.
thank you sir
Muchas gracias amigo por este video,trataré de comprar el kit ,ahora a esperar que subas el vídeo de cuánto aceite acumula el oil catch can y en cuántos kms.
Vaciaría la lata de captura de aceite cada cange de aceite a 5000kms
@@FelixDanGarasiAuto ok amigo , muchas gracias
The catch cans are not advised in cold climates because of freezing condensate...it's -32C here today...would you agree?
give it a go n see if its worth to install or not hehehe.
Spot on mate
Thanks brow.
Hi Felix ! Great video, thank you!
Next video is about cleaning injectors :) ?
Great suggestion!
isn t it easier to connect the oil catch can inbetween the hose that you detached first ?
the one on the top that connects the camshaft cover to the intake ?
so in this video we r installing OCT kit to prevent carbon build ups within the intake. If you were to attach OCT kit to the rocker cover breather hose it would rather do things differently maybe cleaner TB port instead of preventing the intake valves from carbon build up.
question, my mazda 6 have a oil where the pcv valve is in, can you tell me the name of the little black box the pcv valve is plug into? the gasket on mine is worn it seems causing me to leak engine oil
oil catch seperator assy. You can buy the whole assy online.
Hi Felix,
sorry again for one more question because I am plan to install OCC to my '21 cx5 so I would ask the expert like you to make sure I will do it correctly because I have never done it myself.
Is it correct that you connected input(occ) to pcv and output(occ)to air intake manifold? In order to do that you have to took out factory tube that came connected from pcv to air intake manifold? Lastly, there is no other tubes that left open that needs to plug it or seal in close?
Thank you very much :) I am appreciate you advice!
Yes correct sir :) theres no other tubes ,just that 2 tubes .
Thanks bro udah upload videonya sangat membantu, berarti reservoir/oil separator stock dari mesinnya masih tetap digunakan ya?
Btul bro. Masih di gunakan. Ini hanya menambah alat supaya lebih bersih lagi di dalam intake valve nya jadi seperti filterasi.
Hi, May I ask you...Do you know if your engine size vs. 2021 cx5 2.5 cc. NA (I have 2021 NA)are the same layout?
Also am I correct that you connected input(occ) to pcv and output(occ)to air intake manifold?
So in order to do that you have to took out factory tube that came connected from pcv to air intake manifold? Lastly, So there is no other tubes that left open that needs to plug it ?
Thank you very much in advance.
Yes it is still the same layout for the 2021 engine.
Ugh im a bit anoyyed you need to take the manifold off to instal a better catch can, but i guess that gives am excuse to clean it all out..
should add it this engine loves it and this type of oct works very well . 👍🏼
Hello felix! May i ask whats the size of the hose? The pcv side is 10mm and the intake manifold side is 12mm right?
yep thats right pcv side is smaller hose in diameter.
Do you have a video after this install? To check if it's working and after how many months?
yes i have post a short video on it please have a look on the video list. 👍🏼👍🏼
What year is the engine? I thought the modern 2.5 liter Mazda engines didn’t really need a catch can? Am I wrong? I ask because I have a 2018 Mazda 6…
you should try installing one as i was surprised what i caught there, i just did another basic service after 5000kms ive collected a good amount approx 60 ml to 70ml of oil.
Молодец 👍
thanks bro.
What about that last hose that goes to the Top of the Intake hose by thr throttle body? Wouldn't oil go through there as well?
That has its own catch seperator so we dont need it.
Halo... setelah setahun pakai OCT, apakah di intake manifold, bagian belakang katup throttle body, dan map sensor jadi bersih dari oli?
fungsi dari OCT hanya memperlambat kerak karbon dari mesin direct injection. Tidak memperbaiki kebersihkan pembakaran pada mesin.
Hi Felix
My CX5 raves just gone and check engine appeared
@@absonndlovu2923 time to check with obd scan tool to check what error codes the car haveZ
Thank you for uploading the video. I am in the process of installing a catch can on my CX9, 2.5 turbo. I noticed the inlet on the intake manifold is the same. Not sure about PVC outlet. Please let us know how much oil you capture in the can. I have 53kilo on my CX9 already.
No problem. i will update soon after it reach certain Kms
Keren instalasinya bro 👍, utk elbow pakai ukuran berapa? Ada rekomendasi seller elbow di toped?
Thanks bro seller nya ini Beli Elbow nepel selang 1/2 x 3/8 drat luar elbow hose kuningan tokopedia.link/zGDTx9eepgb di toko distributor pneumatic Rp25.850
@@FelixDanGarasiAuto siap, langsung order, sungguh sangat membantu.
@@unclebean8367 sama sama :)
@@FelixDanGarasiAuto terima kasih banyak atas bantuannya, bro.
Hello Peter, how are you!! Please video cleaning Injectores.
Hi sir, im well thank you. Ok will do it soon.
What was the diameter of the pcv valve hose going to the catch can? And the hose going to the intake manifold?
pcv valve is 3/8 . intake manifold is 1/2 .
Can you make a video on how to change the injectors if you have time
Ok will do.
Do you have any video on how to replace fuel injectors on Mazda CX5 2.0 gas engine?
havent got the video yet but stay tune for our next video :)
Thanks Felix!
For US Mazda CX-5 what is the solution to mount the OCC? Something simple that i can do myself and not have to pay a shop to do it?
you also can find a good mounting spot under the intake box.
Hi Felix what is the size of the fuel hose did you use? I already purchased the Catch can same as you! Thank you!
1/2" fuel hose. It would be better if can get the one size smaller.
@@FelixDanGarasiAuto cheers bro! 👍
Thanks for the good tutorial with clear instructions. Can we have an update on how much oil you have "catch" since you installed the OCC?
Sure i will make another update soon. Stay tune on the next vid. ✌️
what about crankcase pressure? aren’t you worried about building it up and the gases escaping from somewhere else or worse, mixing with the oil?
nope not an issue here and still running this setup until now. it works like a charm.
@@FelixDanGarasiAutoany updates on the OCC affecting the crankcase pressure? Or any oil leaks that happened after the installation of the OCC?
@@oaog7 hi , ive post short video about it . I have not got any issue or leaks whatsoever on it. still running it without any problems. ua-cam.com/users/shortsUVLjdQswD2c?si=XyUp_hpG5cmiFsNV
@@FelixDanGarasiAuto thank you!
Awesome video! Do you think it's okay to use a 3/8 hose instead of a 1/2 hose for this catch can setup on these non turbo Skyactiv engines?
Yes the one for the pcv line can use smaller hose 3/8 , the intake valves use the bigger hose 1/2.
@@FelixDanGarasiAuto Awesome. Thank you. Got to run back to the store and return it now and exchange for a 1/2 hose.
@@xdejablu3x no worries mate
@@xdejablu3x or you can find small piece of reducer tube from 3/8 to 1/2 just attach small piece of tube coming from the pcv then add the reducer to it the use 1/2 hose up top.
@@FelixDanGarasiAuto I'd have to buy a 1/2 hose regardless because I currently have only two 3/8 hoses on hand. I'll keep it in mind though for future projects. I'm just going to return the hose for a 1/2. I never ran a oil catch can with two different hose sizes before. Hopefully no issues arise with pressure on two different hoses.
Felix Dan hi I have mazda 6 year 2016 . Where is the transmission oil pressure sensor located ? And also what is the difference between the pressure sensor and pressure switch.? Thank you sir.
Its located inside the transmission drain pan control valve body. Theres transmission oil pressure sensor A and B.
Great video I have a few questions (my tb is at the front in mine 2.2d . Firstly where did you get the torque specs from ? (A manual maybe ? If so which one ) . 2nd what was it running like before you done the intake clean? I have so much more to remove as my air intake goes to the turbo which is cooled then the tb/intake . Great mode many say its a good thing and I'm sure my pcv (which I'm guessing it's connected to - not taken all video in yet due to kids lol) I'm sure my pcv is at the rear left of the exhaust pressure sensor
torque specs are from the Mazda CX 5 service guide manual book.
@@FelixDanGarasiAuto only manual I can find is an online 1 ? That what you have?
@@kevinhancock4064 Yes the one online i use for reference.
@@FelixDanGarasiAuto aw ok brill thank you I m may invest I think I've seen it for around 28 quid
Beuh gw baru nyadar situ orang Indo pas ngeliat ada tulisan Rp. 350.000 hehehe.. salam kenal bro..
Salam kenal juga
The container should be placed below the level of the fumigation rolling
@@rhdbbcb3408 ok mate
My car is 2016 mazda3,Can I just block PVC valve directly?This way you don't need an oil catch can.
nope not possible. The PCV system allows for cleaner exhaust, prevents blowby at seals and gaskets, removes crankcase gasses generated by the combustion process that will sludge up and destroy the engine if left unchecked, and allows the engine to run more efficiently thus creating better fuel mileage.
I would recommend to install OCT with any direct injection engine vehicles.
@@FelixDanGarasiAuto Thank you
what size diameter pipe you use for the catch tank (for mazda cx5 2.5)?
you can choose 3/8 hose for better fitment (for pcv side) this video i use 1/2 hose.
@@FelixDanGarasiAuto 10mm and 14mm?
@@agungsedayu3862 10mm and 12mm
I purchased a id 1/2 and 3/8 should that be fine? And which hose goes to which if you remember?
smaller ones goes to pcv unit and the larger hose goes to intake manifold
Hi Felix. How much oil/gunk has the tank caught so far?
i just checked i caught about 10ml. just done about 3500kms since the install. not many . i found a small leak on my fitting had to retighten it. i will do another post once reach to 5000ks for my next service. :) stay tune.
Is the Mazda 2 build date 2018 direct injection also?
Yes all generation mazda skyactiv is a direct injection engine.
@@FelixDanGarasiAuto So will I end up in the same situation as you? I have driven 23,000km. What should I do?
@@taichihead42 very much identical. Well many users also dont mind not having oil catch can added to their car which is fine. Just use a good fuel and service your car regularly with good engine oil will be just fine. But if you want to add one like on this video you can do it too so you get a peace of mind that the intake valves are not caked up with carbons as before without oil catch can.
Hello Felix , I am planning to buy a Mazda cx5 petrol 2.0 skyactiv engine manual transmission how would you rate this car ... i have seen a lot of your videos and subscribed to your channel ... please can you give your opinion or suggestion on this model would highly appreciate it .. Thanks
it is a very good reliable car for me. Fuel economy. Very zippy. i would rate 8 out of 10. Engine and transmission is very good.
1:33 why did you need to modify the fittings? I thought the fittings that came with the can is dia 1/2"? What's the ID of stock hose?
I had to modify the fitting to elbow due to it is hitting the battery and some part of the engine. The id of the stock fitting is 12.9mm.
@@FelixDanGarasiAuto Thanks, Felix. Did you mean OD of PCV fitting?
@@mtay65 ohh the od of the pcv is smaller i forgot to measure it but i can confirm it is smaller .
I have got myself a Samco hose with 10mm ID. I think it doesn't fit.
@@mtay65 maybe try using some kind of reducer ?
om dudukan oil catch nya dijual ga?
bisa buat mazda 6 kan
untuk dudukan nya tdk dijual. seharusnya bisa untuk mazda 6 juga. :)
What is the ID of the rubber hose?
ive wrote it in the description. 😁
Would size 3/8" hose work?
Yeah it will work just match it with your inlet outlet fitting.
What is it for that customized part??
Just a mounting bracket for the oil catch can to sit in the engine bay.
Mazda Cx5 codeP0122 and Code0222 and U0442
@@absonndlovu2923 PO442 you have a leak somewhere within the P0442 could be anything in the evap system: loose/faulty gas cap, purge solenoid, vent solenoid, charcoal canister, vacuum leak in any of the many hoses.
Where can I get that exact mount?
Have to get it custom made.
Da resultado o no?
i just checked and im surprised it collect some oils within the catch can. :) i can confirm it is working as it should be. i Will do a follow up video for us.
@@FelixDanGarasiAuto ok estaré atento a los futuros vídeos , muchas gracias
i dont think this is the proper way to do it, the catch can is suppose to be lower than the pcv valve, i know this because i have catch can on my mazda 3 and bmw and it science that the the oil in the pcv cannot travel upwards
mine is fine n works it catches some oil in it will show you very soon on my next video. but if u want to install it lower area you can.
Pakai selang 0.5 in min??
Iya selang 0.5 atau 0.25 jg bs.
@@FelixDanGarasiAuto oiya, kan ukuran yang di manifold sama pcv kan beda, misal pake ukuran 0.5 bisa pas di dua" nya? Mesin 2.5L kan?
@@oktaviowibisono8379 bisa potong sedikit 2cm selang yg aga kecil diameternya buat nge ganjel adapter di pcv valve nya. Jadi pas masuki selang 0.5 inch bisa di clamp dengan padat. Soalnya memang aga kecil ukuran pcv valvenya. 2500 cc sama pcv nya sperti 2000 cc.
@@FelixDanGarasiAuto siap min, trims infonya
@@oktaviowibisono8379 sm sm.