Nice repair. Your solder repair will be good for the remainder of this washer’s life. How much do you get for this type of washer in your area? Thanks.
Appreciate it. I always try to do a thorough job. This sort of machine will typically sell in a day at the $220-$240 range. My goal is clear inventory as fast as possible so I can bring more in and do more videos for the people!
Man.....blessings to you good sir....this saved me a lot of money and headache...I had a lil metal hairpin get stuck in my water drain motor....after taking it apart ...thank you so much
This was great video! Samsung wanted $350 to just come and take a look, then they sad my washer was to old, I should get new one, I followed this video and found sick in the intake of drain pump, so issue is solved. Thank you again!
Interesting with this washer I had a Samsung many years ago and it did the same thing .. seems these models do these things especially without the agitator. Several things went wrong eventually the warranty covered a new one they never did figure it out . Good going !
Thank you so much for this video. ❤The washing machine was filled with water and when I took the pipe off all of the water came out and it’s back working.😅. I thought I was going to have to buy another machine. Thanks again!
I've got a draining iss that is intermittent, about every 3rd time we run the machine. Got a 5C code on diagnostics and also a 4c but water pressure looks good. Will take the steps in this video to check. Could a vacuum locked drain line possibly be a cause also?
Yes, improper installation of the drain pipe can lead to issues. There are plenty of resources online how deep the drain pipe should be inserted into the drain. Could also he a partial blockage somewhere in the system.
When I reached my finger into the Intake of the drain pump to make sure it was clear there is a plastic thing in there that blocks it. It seems like it is supposed to be there like a drain stop? Is that right?
Great video , I have the same problem with control board being disconnected . What type of wire did you use to splice black /yellow wires together ? Speaker wire ?
nice to see you got your machine working my Samsung top loader the pump was packed up and replaced with the older machine I used to have now the water pump keeps running what must I do to fix it.
Try letting the pump run for a few moments. It may be in flood mode and need a few minutes to clear up. I would let it run for 5 minutes and see if it stops
Hi I’m wondering could you give me advice . My amana washer is broken. My washer agitator is making a grinding noise and is not moving at all. In addition the wash gets stuck rinse . That is how I realized it’s not even moving the clothes .
You will have to go in the back to remove panel. Then maybe tip it on the side & have a look under washer Are you able to remove the center agitator? Reply with your email address here if you need more assistances.
To drain the water out of the tub when the pump will not pump it out, just lower the drain hose into a bucket or whatever. Lower the drain hose lower than the water level in the washer and it will drain out quickly.
My son over loaded ours and it comes on but it wont start a cycle . Has a little bit of water but i was wondering if you could tell me how to set it to drain ? Maybe try to set it to a cycle?
ATG & I suggest to use the Dry & Wet Vac. Or run a hose (about 7+ feet) into the tube & suck the other end to a bucket. You will have to disable or unluck (open) the lid to get hose into the tube.
Just purchased, and had this same machine installed yesterday. After ONE load, it’s already giving me fault codes, and won’t drain. Run as far away as you can from these machines. I should have know better. I’m convinced the positive reviews that Samsung appliances receive are all fictitious. Never again.
The water jet pre wash feature on my samsung top loader won't dispence water. The rest of the washer works fine . It fills with water but nothing comes out of the water jet. I can't seem to explain that to you tube or Google. Any ideas how I can fix this without calling a repairman?
Thank you! That was very helpful!
You're welcome! Glad to help!
Bucket
Nice repair. Your solder repair will be good for the remainder of this washer’s life.
How much do you get for this type of washer in your area? Thanks.
Appreciate it. I always try to do a thorough job. This sort of machine will typically sell in a day at the $220-$240 range. My goal is clear inventory as fast as possible so I can bring more in and do more videos for the people!
Man.....blessings to you good sir....this saved me a lot of money and headache...I had a lil metal hairpin get stuck in my water drain motor....after taking it apart ...thank you so much
Awesome! Great Job on the fix!
This was great video! Samsung wanted $350 to just come and take a look, then they sad my washer was to old, I should get new one, I followed this video and found sick in the intake of drain pump, so issue is solved. Thank you again!
@gevorgn5143 You're welcome! I'm glad I could help!
Thank you so much for this video. I had a bunch of cloth stuck in the drain. You’re the best.
Glad it helped!
Interesting with this washer I had a Samsung many years ago and it did the same thing .. seems these models do these things especially without the agitator. Several things went wrong eventually the warranty covered a new one they never did figure it out . Good going !
Thank you so much for this video. ❤The washing machine was filled with water and when I took the pipe off all of the water came out and it’s back working.😅. I thought I was going to have to buy another machine. Thanks again!
Most likely, there was a clog in the system. Glad I could help
Very good video!! Lots of information delivered in a down to earth, easy to understand delivery👍👍👍
I've got a draining iss that is intermittent, about every 3rd time we run the machine. Got a 5C code on diagnostics and also a 4c but water pressure looks good. Will take the steps in this video to check. Could a vacuum locked drain line possibly be a cause also?
Yes, improper installation of the drain pipe can lead to issues. There are plenty of resources online how deep the drain pipe should be inserted into the drain. Could also he a partial blockage somewhere in the system.
When I reached my finger into the Intake of the drain pump to make sure it was clear there is a plastic thing in there that blocks it. It seems like it is supposed to be there like a drain stop? Is that right?
Awesome! Thank you! I’m going to run through these diagnostics now and then decide if I can fix it myself or the pump is fried.
Good luck!
Great video , I have the same problem with control board being disconnected . What type of wire did you use to splice black /yellow wires together ? Speaker wire ?
I did not have to add wire, I just connected the two broken ends together with solder. If you feel uncomfortable soldering, just use butt connectors.
Would it be the same reasons for a front loader?
Thanks a lot, man. This was very helpful. Almost got charged an arm and a leg just to remove my kids' underwear from the inlet.
Glad to help! Some appliance guys probably would have charged $200 to do this
Thanks, just unplugged the drain. Back in business
The resistence of the drain pump is 4.9 ohms. Is that correct?
nice to see you got your machine working my Samsung top loader the pump was packed up and replaced with the older machine I used to have now the water pump keeps running what must I do to fix it.
Try letting the pump run for a few moments. It may be in flood mode and need a few minutes to clear up. I would let it run for 5 minutes and see if it stops
i get OC code, when I disconnect power, the things drains itself..which means no clogg and pump working, right? so why the drainn code.
Would a clog also make it super loud when entering drain cycle? Please tag me if you respond so I see your response!
Yes, it could definitely make the drain pump make loud noises
Great video! Thank you for sharing your knowledge 🎉
You're welcome!
Hi I’m wondering could you give me advice . My amana washer is broken. My washer agitator is making a grinding noise and is not moving at all. In addition the wash gets stuck rinse . That is how I realized it’s not even moving the clothes .
You will have to go in the back to remove panel. Then maybe tip it on the side & have a look under washer
Are you able to remove the center agitator?
Reply with your email address here if you need more assistances.
To drain the water out of the tub when the pump will not pump it out, just lower the drain hose into a bucket or whatever. Lower the drain hose lower than the water level in the washer and it will drain out quickly.
Thank you, Great video!
THANKS FOR THE VIDEO FINALLY FIX MY WASHER IT WAS A COIN ON THA WATER PUMP.👍👍👍👍😎😎😎
Awesome! Great job!
My son over loaded ours and it comes on but it wont start a cycle . Has a little bit of water but i was wondering if you could tell me how to set it to drain ? Maybe try to set it to a cycle?
I did your test cycle from another one of your videos and it says 51 so it lead me here .. ty for your help
Overloading wouldn't cause that..
Great job, very helpful!!
Thank you!
Fantastic video! Thanks for the help.
You're welcome!
I just replaced drain pump and its still not draining. Any ideas?
Are you getting the correct voltage to the pump when it is unhooked and the machine is in the drain and spine mode?
Drain hose clear, basin port clear, 120v to the pump, 23 ohms to the motor…going to replace the motor tomorrow 🤞🏻
Just took out the pump and the impeller inside was floating around. 😳
Need help with front loader
Right now my machine is almost full of water hw will i empty it😢
ATG & I suggest to use the Dry & Wet Vac. Or run a hose (about 7+ feet) into the tube & suck the other end to a bucket.
You will have to disable or unluck (open) the lid to get hose into the tube.
Vacuum
Same!
I went to Walmart and got one of those siphons for fish tanks!!!
what i did just now too i used a big dog bowl then a cup
Why it will stop and show the error sign later it will start and stop. Why .
Can you made why Samsung not spinning
Will try to cover that issue in a future video. In sha Allah!
My washer is not spinning properly how do I find out what’s wrong with it
Just to make it easy on you all you have to do is lay the black drain hose down all the water will drain out
Lower the drain hose til its lower than the water in the tub and it will run out.
My washer stayed full of water what I do to drain it out?
What I did was just get a bucket or large container or something and scooped all the water out. 😅
My washing machine don't stop draining after we replace the pomp
I'm hoping it's just clogged. I can hear my pump trying to run I thonk
Just purchased, and had this same machine installed yesterday. After ONE load, it’s already giving me fault codes, and won’t drain. Run as far away as you can from these machines. I should have know better. I’m convinced the positive reviews that Samsung appliances receive are all fictitious. Never again.
Wow. Take it back!
I've had mine for 8 years and got my first code today. I will always buy them
Took me yrs to get one error code... usually last 9+yrs...
Same I'm on my second machine, will get a different brand for washing machine and keep them just for phone.
Mine finally gave me a code. Been 8 years. Never had any problems.
The water jet pre wash feature on my samsung top loader won't dispence water. The rest of the washer works fine . It fills with water but nothing comes out of the water jet. I can't seem to explain that to you tube or Google. Any ideas how I can fix this without calling a repairman?
I have a WA50B5100AV error 9C8
Just shop vac the hose.
How about Samsung front loader
I only work on top loaders right now. The front loaders are just too heavy for me to move around
@@DuctTapeMechanic Heck the top load is not exactly light.
But you are correct the front load is way too heavy for me.
When I took off the drain pipe a lot of water came out of it. What do that mean?
No draining full water
3:25
Disposable Appliances. Samsung…😢
Hopefully I can help save a few from the landfill!
You will! 😌👍
and sadly there are others much worse
MI mashing is LG