DIY Budget Bookshelf / Desktop Speakers // Build Plans
Вставка
- Опубліковано 11 бер 2020
- Build plans for my bookshelf/desktop speakers:
erikdidit.com/shop/
/ erikdidit
Woofer: ndt5.net/c/?si=14570&li=16273...
Tweeter: ndt5.net/c/?si=14570&li=16273...
Amplifier: ndt5.net/c/?si=14570&li=16273...
Very easy to build and the components are easy on your wallet! They sound great with surprisingly deep bass.
Music:
Scott Buckley - Tears In rain
Spotify: bit.ly/2YCdx82
Soundcloud: bit.ly/2MYT8D
Iaio - Icaro
Spotify: open.spotify.com/artist/7sQgK...
Instagram: / iaio_official
Sappheiros - Embrace
Soundcloud: / sappheirosmusic
that indent on a cone breaks my heart...
First thing I noticed. I'm so anal-retentive I'd have bought a replacement before finishing the video.
I've fixed mine with a vacuum cleaner, a reduction cone and a straw to make enough suction to pull it back out. You just need to find the couplings to reduce it enough to around a 1/4" in diameter and it will suck it back out.
I think pc speakers are best done with full-range speakers. I recommend the "1 full-range speaker in one box" version. Because
the sound will be clearer and of better quality when we use one speaker that plays the entire frequency range.
@@garzez in the disgusting but true file, your mouth will work too. It'll still have a crease in it but it won't be indented. I dreaded this happening during the build, sorry to see it did. :(
Yh can be fixed with a hot glue stick by heating the end up then stick it onto the cone and pull slowly out and it should look like new again
use a vaccuum carefully to pull out that tweeter. awesome build, great workmanship and selection of speakers :)
I love those tweeters. I used them in my HT system. For the price you can't beat them.
Always buy extras of those tweeters, because inevitably somebody will show up and push them in. Enough damage to a metal dome can cause degradation of the frequency response, because it forms creases in the metal dome material that don't ever seem to be able to be flattened out. But those Dayton units have excellent high frequency extension, and metal domes in general give good dynamic impact. For many years Bowers & Wilkins sold aluminum dome tweeters without any grilles. Your cabinetry is beautiful.
Glad to see you use hex and torx screws. They're such a minor cost to reduce the risk of your screwdriver slipping out of a Philips screw and impaling a driver.
oh boy here we go! Finally the legend Erik did it back at again with some high quality speaker builds!
Heart melting video... Awesome.... Thanks...
Always outstanding 💯
Thx! :)
So much cool to see the build video, super like 👍👍👍
Very nice, looks awesome as normal
Thank you!
Perfeito amigo! Parabéns 🇧🇷
SMSL AD18 ? This is that i have and looking for diy small speakers 😆 Thank You for sharing. Great work!
Great Video and you are so talented! It is such a pleasure to watch it and to see the professionalism.
I would try myself to build the speakers, but surely I'm not equipped like you.
Hi quality job .. Love it .. thanks Erik
Incredibl sound
wow those swound great through my diy speakers. XD
it was great. it was creative
I said to myself. "oooh i can follow his plans and do that"........ then remembered i dont have a single woodworking tool. lol oops
You make quality speakers, I learned a lot from you, Along with audio enthusiasts. Well done
Finally, liked 👍
It's only been 10 months :D
Erik did it great job, Looks and sounds great
Try using a solder sucker to fix that tweeter dome, it worked for me
Dope, awesome build, I would love a pair of those in my studio! Glad to hear my track put to good use in a speaker test :D
Thank you! I'm so happy that you let us use your music, awesome work!
bravo!
Similar to Audiosmile....Very cool.
Looks pretty cool!!! I'm sorry to be the one to mention the damaged cone on the little speaker/tweeter..... again, look pretty cool regardless of that.
Very nice speaker build! Such a pity about that one tweeter tho;)
Yeah, I will probably replace it if I end up selling the speakers.
@@Erikdidit do you have a online shop or so? I am maybe interested in buying
Yeah, it's erikdidit.com
Looks like a variant on the Dynaco A series ( A10/A20) a-periodic speaker design. These were the best bookshelf speakers ever made. Also, the best Jazz speakers I've ever listened to. Good job.
what type of wood is this ? (PAL, PFL or FK) it looks very good
If you make front panel a bit smaller then it wuld have white ring around it l! I think that wuld look even better!
Linda essa caixa...!!! 👋👋...alô Brasil...
Theres always that one tweeter..
super
You did made budget speakers but they sound like expensive ones. Nicely done!
if you where to buy a speaker that can be identical on all channels minus the center channel & Sub's of course , for a 7.2.6 speaker surround setup. choosing (3) different ((( 1st, 2nd , 3rd place ))) pre-build's & (3) D.I.Y from Part Express what would you're recommendations be. can you include 3 chooses from both category's for the budget / value person in mind ...
It's very nice video and sound quality it's very powerful.. but brother..how to make that circuit board.. please explain.. make a video ❤️
Subbed
I always enjoy your speaker builds. Sad to see that tweeter was a casualty :( probably easy enough to replace though I suppose
Thank you! Yeah, I bumped it by accident. I will probably replace it, just for the looks :)
@@Erikdidit at least it looks sealed, and sounds like it still functions. I think my cat punctured the tweeter on one of my old Polk studio monitors, and it just went silent.
@@ashcooper7962 Yeah, it still seems to work alright. I will measure them and see if there is any difference.
@@Erikdidit you can simply use your vacuum cleaner, press gently the hose to the dome and apply - again gently - some suction. the underpressure will restore the default dome shape in 99% of the cases; i've done this so many times.... otherwise a really great, lovely work of yours, a pleasure to watch!
You the most talented builder...and when are you releasing new videos?...cos it's been a year now we your Beautiful work
Have you tried to pop that dented speaker back out? Never did it myself, but I hear you can use a vaccum hose on it to fix it. Nice build. I love the look of it. Great work!
Thank you! I tried to do it with a straw and suck it out with my mouth but it didn't work. There is probably a ton of things to try if you Google it. It is a bit annoying for sure.
Try with a vacuum cleaner.
@@Erikdidit i've used paper tape to fix dented speakers; be sure to use the cheapest one so there is less tack
What kind of plyboard did you use
Gonna make some speakers again - miss it. They just got so darn cheap I can’t make them them for less but fun 🎉
Is there anything in particular you want med to build?
@@Erikdidit I think you’re ideas are perfect 👍 I have just seemed to go over budget and costs me more then retail 😆 The only speakers I was glad I made were voigt style 20 years ago - would like to someone build a nice pair.
@@Erikdidit if you do, message me to sponsor the video : ) I’ll buy them from you 2x cost (if you can ship to Florida 😄👍
I think you’ll have to build them “mini” though - shipping would cost more then the build 😅 that would be interesting for sure, never heard a small 2’ tall voigt pipe before 😊 you may never part with them…
Very cool speakers. I have 2 questions before starting the project.
1. Have you dimentioned the box and the crossover according to the drivers? Have you measured the freq response of the speakers?
2. Closing the front with wood rather than mdf doesn't deteriorate the performance?
Thx, The box is calculated with winisd and the crossover with xsim. I measured the speakers when completed
@@Erikdidit very good.... Time to buy the plan then.!
Done!!
Hi, I have rebuilt these very great speakers. Now I would like to build a subwoofer and connect it to a 2.1 amplifier with the speakers. Does it make sense at all to combine the speakers with a subwoofer?
Yeah, i think it could be a good compliment. I haven't done it myself but I have thought about it
What's the white paint?
No damping material?
Good
Thx!
Man, I would love to build an audio monitor box, but I can't measure it to make it look good, it's not professional at all, I'd just like to use some speakers I have, there are 3 speakers, one 15w, 5w, and a 2 25w for a 30w tweeter, it would be like a mine tower, could you help me with some measurements or a website so I can build a project?
Do you have any bigger or higher quality bookshelf speaker build plans? I want to make speakers but can't find that many good plans
Nothing yet, i may do it in the future tho.
what happen to the tweeter?
Good job
Where can I see the crossover diagram?
In the build plans
Very nice, but a nasty dent in the left tweeter!
bookshelf terindah yang saya liat👍
Can i make it bro... At home.??
👍👍👍
What happened to the tweeter????
Hi. Are ther plans for crossover to or just for speaker box? Realy need yust crossover plans. Thanx
Both are included
@@Erikdidit Thanx. I made an order.
OK dude let me give you advise on your recording style if you want to shoot cinmadic shoot 24 fps ,60 really on is yous for fast moving object and it well be lighter on you workstation again just advise
What is the woofer and tweeter, link on description not work
Thx for noticing me. I have updated them now.
Commercial, active or passive speakers(mainly 2way like yours) are now profusely marketed everywhere and there so many models to choose from, some of them sound very good to excellent and yet competively priced mostly less than US$1,000. There is really no reason build your own unless ones want to :
1. prove to yourself you can build them for personal reasons
2. the one you build must offer something different which no commercial speakers can offer e.g. superior performance or using different design approaches or technologies or added features not offered by commercial speakers like Room correction built-in.
From the price point of view, commercial speakers already offer good value and yet looks very good. One needs to spend alot of time and labour on DIY speakers in order for them to look good ie comparable to commercial speakers.
The choice is yours.
I appreciate your comment, but I think you are missing a point. You can build them because you enjoy the process and the satisfaction is even greater when you made them yourself.
I certainly agree that there are many good 2way speakers on a budget, but you can build these under 100$ excluding the amplifier.
I enjoy building my own just because when others hear them and ask where they can buy them I say " You can't buy them , I built them."
@@justins.1283 I built a few sets myself over the past few years. I am now embarking of building a new set based on speakers topology rather than building to impress friends. This set should sound better than most commercial set oout there and costs less.
To cut down the time taken building a new set of cabinets(not cheap) process I am buying 2nd cabinets and strip out the guts and replace them with new drivers.
@@yttean98 you then need to match the speaker properties to the old cabinet and will be restricted in any performance beyond the original design.
there is pride in building your own. I enjoy the process of DIY.
Amplifier link doesn't work
0:39 How many viewers cleaned their screen here!
Which is that reciever?
S.m.s.l ad18
Hi! Thanks for this vid! One thing though, your links don't work for me. UA-cam highjacks the links and when I click on the Leave UA-cam button, it takes me to ndt5's site but not the product pages.
Thx for noticing me. I will fix them
Links are updated now
@@Erikdidit Nice. Yeah I just checked and I can see the right pages now. Thank you!
Škoda toho poškozeného výškového reproduktoru
Im wondering how much would u sell those speakers? 😀
I'd just double the cost honestly if I'm still at trial and error stage. It's $60 for the drivers, 15 for mdf boards. I'm not sure about the crossover's cost but it should be under 50, excluding wiring and terminals. So a fair price for these two would be around 250-$300
That seems like a pretty solid calculation
What is the size of this speakers
4"
Пищалку когда успел замять?
🇧🇷🇧🇷🇧🇷🖐️👋🙌👏👏
You foked the tweeter up man ..
What is the price of this set
To build yourself? About 100€.
DIY just if you spent 10k on tools, great ;)
Dented the left dome lol
Tools.....🤔
I wish I have all
♥ ♥ ♥ ♥ ♥
★ ★ ★ ★ ★
The tweeter had a bad day
Why is the tweeter damaged? ua-cam.com/video/wo8Rfd4wgPU/v-deo.html
Cool video. Unfortunately no explanation for diy people watching and wanting to learn.
Thx, that is what my build plans are for 😉
Lmao. Sorry, I have no idea how I missed them 🤣
How much was the overall cost?
Between 100-150€, but closer to 100. I can't remember exactly
@@Erikdidit thank you! I might actually build this!
@@mrproplayer7687 good luck! :)
@@Erikdidit :)
DIY step one: Build a factory in your garage. 😂
Nice. You provided 10% of a 100% solution. Thiele-Small parameters weren't discussed.
I gather you ensured your drivers were appropriate for their home.
Sorry, no thumbs up from me for a simple speaker building plan.
I'm not sure if you are critical to the video or my build plans. Can you please elaborate?
There is no measurement details of the box...
The build plans have all measurements you need
You didn't tell the dimensions?
It is available in my buildplans
Dented
TyumyezcelackalonkisceniОабаб
wtf, that one tweeter is ruined.
I'm aware
The wiring looks hella complicated
It is actually a pretty simple crossover :)
I want to tell you that I can't watch this video. I just buffering. Maybe you should contact UA-cam so you don't miss wiews. Best regards.
Thank you! I will look into it
Same here
if you buy a used receiber onkyou or denon ow technics could be so much better than this amplifier, the sound quality is so much better..
Step 1. Buy tools for 100k.
100k? Do you want the tools to do everything for you? You can build it with a drill, table saw, and a router.