@@LeftyMaker They are drivers designed for ports only, passive radiators run bass out of phase they will sound terrible. these drivers are only for upper midbass frequencies, they dont push enough air for passive radiators. they are harsh at 150hz, you need super woofers for passive radiators.
@@Synthematix Passive radiators are always good, as long as you know how to calculate the apropriate size. Most of portable speakers nowadays has tiny woofers which can go down to atleast 90-80 hz. Jbl xtreme2 has a pair of tiny 2.7 inch woofers and can go up to 55 hz.
The speaker is beautiful, my only gripe was that you owned a router, if only you had a flush trim bit for it, Trimming the corners of the not so perfect rounds would have mad it easier for you :)
Nice job using just a few tools. There are lots of videos on You tube that make speakers but they literally use a workshop of expensive tools, well beyond my meagre budget. Because you already had a jigsaw, I would have used it to cut out the speaker drivers. There are jigsaw blades that are available having a narrow blade for curved cuts.
I watched all the videos on your channel. Do great artwork. I have four 10W 40mm 4 Ohm subwoofer to fit in two boxes. So the point to make is how many inches box I would make a 40mm One speaker. Please guide
можно было шпоном покрывать после приклеивания лицевой стороны, тыльную сторону сделать заподлицо. тогда не светились бы ни шурупы на морде ни торцы фанеры на морде и спине. спина была бы съемной для доступа к потрохам а спереди был бы монолитный вид.
You did a great job. It is cool to see older speakers get a new life. I would of liked to have heard them in action.
I loved that you explained everything that you were doing. Great job on the speaker too!
Great job man.
Nice speaker! Mostly the design.
Thanks for the explanation.
You explained everything well and clear. YOU DESERVE MORE THAN THIS!
Very neat! Great Video.
That's pretty good, can't wait to see another project.
Thanks! Glad you liked it.
pull out these bass ports and put two radiators,with this setup you can hear more bass in your speakers...
NO! creative drivers like this are not designed for radiators
Interesting. Could you elaborate? Is it something in the TS parameters that makes them unsuitable?
@@LeftyMaker They are drivers designed for ports only, passive radiators run bass out of phase they will sound terrible. these drivers are only for upper midbass frequencies, they dont push enough air for passive radiators. they are harsh at 150hz, you need super woofers for passive radiators.
@@Synthematix Passive radiators are always good, as long as you know how to calculate the apropriate size. Most of portable speakers nowadays has tiny woofers which can go down to atleast 90-80 hz. Jbl xtreme2 has a pair of tiny 2.7 inch woofers and can go up to 55 hz.
Great job ! you have great videos
this is cool
The speaker is beautiful, my only gripe was that you owned a router, if only you had a flush trim bit for it, Trimming the corners of the not so perfect rounds would have mad it easier for you :)
u made this only use dremel really amazing
with a limited supply of equipment nice job well done!
Hi, nice work
Nice job using just a few tools. There are lots of videos on You tube that make speakers but they literally use a workshop of expensive tools, well beyond my meagre budget.
Because you already had a jigsaw, I would have used it to cut out the speaker drivers. There are jigsaw blades that are available having a narrow blade for curved cuts.
Lovely work
I would give more attention to that black paint finish!
Fantastic job, specially you did it with few materials and tools
Thanks for showing how and sharing that
I think you did a great job. with some errors nobody is perfect and there are so minute you cant tell the difference. Once again you did a great job.
nice work. Wanted to hear them
Excellent. Thanks!
wow......... It was so much great and very helpful tutorial.............. Thank you so much for sharing us whole things !!👍👍
Thank you Very much for the Video.
Great job
very good job!
Great build!
Dude, very nice video. Loved the results!
Liked and subscribed!
Igazán szép, művészi munka.
How did you identify all of the electronics?
Nice job, subscribed to your channel. Keep making stuff , and invest in tools to make your work even better. 👍👍
great ......making speakers out of speakers
cute plane
👍
Fuse probably blew because those little computer speakers usually have a 12v power supply - the replacement was 24v
Good observation. However, the original supply was a 27V one!
@@LeftyMaker ah, well nevermind then 😊
I watched all the videos on your channel. Do great artwork. I have four 10W 40mm 4 Ohm subwoofer to fit in two boxes. So the point to make is how many inches box I would make a 40mm One speaker. Please guide
Can you share dimensions please? i have same speaker and i want to convert to wood.Thanks!
nice job !!!
Awesome. What is the program you are using for the design?
SketchUp. They have a free version for hobbyists
This is very cool. Do you sell them?
No, not really. Maybe one day I might. :)
можно было шпоном покрывать после приклеивания лицевой стороны, тыльную сторону сделать заподлицо. тогда не светились бы ни шурупы на морде ни торцы фанеры на морде и спине. спина была бы съемной для доступа к потрохам а спереди был бы монолитный вид.
think you did good job. Cutting holes could be difficult . U could cut with drill. Make a diy hole cutter. With two screws and a u
Piece of metal.
у него есть фрезер, а отверстия под динамики он весьма изощренно делает...
what about the sound test
nice Job
Thanks! I don't have a good microphone for a sound test, but the sound is okay.
Use battery on it and make full wireless speaker
Maybe next time. These work on a 27V power supply. :)
Will u please told from where I buy all this assesories
Yor englishc is veri gud
You did not test your speaker
beautiful look and should be turned into bluetooth.
cara membuat sepeaker
Add Bluetooth module to your project.
I was waiting for the output sound???
саморезы на лицевой? фууу.
How to make a speaker out of a speaker. Uh, I think I can figure that out without any help.
Sir Are you rashiyan ?
You mean Russian? No, Bulgarian
MODIFED USB SD card MP3 PLAYER / RECORDER FM RADIO AUX BLUETOOTH
aga susah
ля какая )) а вот моя одна из колонок) ua-cam.com/video/HWs-ZaXMsOs/v-deo.html
оригинально)- вот тоже интересная колоночка только мини) //ua-cam.com/video/mHbXthxl3To/v-deo.html
Não gostei do fala, fala durante o vídeo todo...
lol I did this with logitech x230 few years ago and it looks a heck alot better than yours