Tighten you're servo connections and reduce failures with this quick tip By: RCINFORMER
Вставка
- Опубліковано 30 вер 2024
- Tighten you're servo connections and reduce failures with this quick tip!
▼Check out the Blitz RC Works V-22 Osprey Here▼
V-22 Coastguard: bit.ly/3pHwRKh
AVAILABLE IN 4 COLORS and RTF & ARF VERSIONS
Clicking on our links and purchasing from our links supports RCINFORMER!
HORIZON HOBBY Main Page► bit.ly/3h3kSm0
Hobby Zone Main Page► bit.ly/2XGEPa9
BITGO HOBBY► bit.ly/2Ah40bf
Dynam C-47► bit.ly/36aqrMG
SPEKTRUM DX9 USED IN MY VIDEOS► bit.ly/39ChQkx
SPEKTRUM SMART BATTERY CHECKER USED IN ALL MY VIDEOS▼
bit.ly/3hrmIx3
▼***NEW SPEKTRUM NX RADIOS PAGE***▼
bit.ly/3rFIh2K
Clicking on our links and purchasing from our links supports RCINFORMER!
Thank You for your support!
▼Get your SPEKTRUM Smart Charging components here▼
▼SMART CHARGERS USED FOR THIS REVIEW▼
-Smart 30A 540W Power Supply► bit.ly/2OKJ8gw
-Smart S1200 DC Charger, 1x200W► bit.ly/2D09lVC
-S1500 DC Smart Charger, 1x500W► bit.ly/3jzdoJl
▼RECOMMENDED A/C SMART CHARGERS▼
-S2100 Smart DUAL AC charger► bit.ly/2ONp7WD
-S1100 Smart SINGLE AC charger► bit.ly/3hvf1pU
▼RECOMMENDED SMART LIPO PACKS▼
-SPEKTRUM LIPOS► bit.ly/382bY6J
-SPEKTRM 6S 7000 30C SMRT IC5► bit.ly/3iKzg3r
-SPEKTRM 6S 5000 50C SMRT IC5► bit.ly/33YOBJj
-SPEKTRM 6S 5000 30C SMRT IC5► bit.ly/31bvN88
-SPEKTRM 6S 5000 100C SMRT IC5► bit.ly/37ABteY
▼FMS Plane Stands-THE BEST STAND AVAILABLE!▼
Link to Rose (Red) Stand:
bit.ly/30A0XFg
Link to Silver Stand:
bit.ly/3cZnkch
Link to Gold Stand:
bit.ly/2Sp9er5
▼HELP SUPPORT THIS CHANNEL BY USING OUR LINKS TO PURCHASE▼
.... Special thanks if you were able to order it thru my Affiliate links here.... that is greatly appreciated! ... At no additional cost to you, Purchasing thru our affiliate links and Amazon Store supports RCINFORMER as we do earn a small fee for the referral. Thank You for supporting us!
ERNST Manufacturing plane stands and R/C Products► bit.ly/3rBrmP6
CREWZINN AIRPLANE STAND AVAILABLE HERE► bit.ly/3h5tGc3
▼Get Your E-flite F-4 PHANTOM II BNF Basic with AS3X and SAFE Select here▼
BNF Version at HORIZON HOBBY► bit.ly/3fy9ZZ8
PNP Version at HORIZON HOBBY► bit.ly/3evnYNG
BNF Version at HOBBYZONE► bit.ly/2ZrBSwf
PNP Version at HOBBYZONE► bit.ly/3j3cRix
▼Please visit my new AMAZON Store for ONLY the Exclusive stuff that I use Here▼
www.amazon.com...
Follow Rich at RCINFORMER on Social Media
FACEBOOK► / rcinformer
INSTAGRAM► / rcinformer_official
TWITTER► / rcinformero
Website► www.RCINFORMER...
Ahh yes. The old hot dog down the hallway syndrome. Basically keegles for servo connector. 👍👍😎✌✌
Very useful tip to eliminate potential failure point. Thanks Rich!
"Tighten "your" servo connections..." (great tip however!)
Another fantastic tip and very useful info Rich! Thanks for sharing 👍👊
Excellent tip. Once the servo plugs are connected I wrap the connection with office tape or servo connector retaining clips which are made for the purpose.
Whaahoo You !!! All this time I just thought it was ware and tear and never looked very hard at these !!! Im a dk !!! Now I have 3 months work to go through my planes... We don't know what we don't know .... such is life !!! Thankyou 😉😎
Bonus tip - After you jab your finger, a drop of CA on the puncture wound works nicely.😬 Seriously, another great tip I'll watch out for this from now on.👍
Be careful!
@@RCINFORMERgreat tips man. Huge shout out from Canada. Rich do you put velcro to prevent battery slippage on all your planes? For example on the Otter and the piper cherokee? Do you get double side adhesive velcro or just glue it in?
@@deppi I normally use shelf liner with double sided scotch tape to Keep it from sliding.... The 2 straps will keep it attached to the shelf liner and that way I don't need to use Velcro:)
@@RCINFORMER ok . Thanks
Thanks for the very informative video. All the best in the New Year, and of course, Happy Flying.
Great tip Rich. It also brought back memories of me trying to make my own Bind plug when I first got in the sport. I’m at the field, I have the place to myself, 2 planes, 4 batteries, my DX8.... and no Bind Plug. It would’ve been quicker to just drive home and get 1 of the 2 bind plugs, but my OCD/ADD/ADHD/Dyslexia got the better of me. Disastrous. Only had to forget the bind plug once. Now I have one in every plane’s receiver before I leave, I have bind plugs attached to my transmitters, lanyards, and battery bags. If I find a bind plug on the ground, for me at least and to this day, it’s like winning the lottery.
Great tip, particularly on removing the connectors from the plastic housing as well, thanks for sharing 👊🏼
I always enjoy watching your video, huge thumbs up from the Midwest. Happy new year
I guess I am kind of randomly asking but does anybody know a good website to watch newly released tv shows online ?
@Ernest Casey i watch on Flixzone. Just google for it :)
Great info. An easy way to avoid trouble.
Does that causes receiver problems wen the rc servo is not tighten contacts to the receiver
No, but it can cause intermittent servo movement or loss of servo control IF there is a bad connection!
@@RCINFORMER i had servo connection problem to reciever it was the usb wall plug but i tried 4x aa batteries Allgood and tried 7.4v lipo battery worked good thing is with my other servos they work good on the usb wall plug just the new servos ive got didn't
Great tip, thanks......
👍😊 Happy New Year !
Awesome tip, thanks
will you please change it to "your servo connections" ?
Great tip. Thanks.
Excellent tip and video. Thanks.
Don't forget to use some electrical contact cleaner also...
thanks ! ...
Thank you for the excellent tip Rich !
👌👌👌
I used this tip yesterday to fix a balancing plug which was presenting intermittent contact with my voltage meter. I found which wire was giving the bad contact and pulled its connector from the housing. I was able to see how loose the pin on the meter fits. After lightly pressing (smashing) the connector it gave a solid contact no matter how I move the balance lead. Thanks again!
Thanks Rich!
"sometimes"
Great tip, thanks. What about the male connector? Any potential issues with those?
Top tip, l’ll be checking my all my servo connections now.
Gees Rich that exactoblade and your fingers. Nice tip 👍🏻
Very useful tips. Thank You 😊
I would use heat shrink to keep the connections together.
Nice tip, I'll put that in my memory bank.