DIY Motorcycle Lift Table using Winch
Вставка
- Опубліковано 1 жов 2024
- Project no.107 Motorcycle Scissor Lift Table
This DIY motorcycle Working Lift Table is powered by a Winch Hoist that i made in my previous video, the table can lift up to weight of 200kg and it has a maximum height of 40 inches and minimum height of 10 inches.
In my observation theres some things that needs to be upgraded
*The Scissor hinges mechanism should be sturdy, the thickness of the metal should be thick (6mm up will do fine)
*The Pulley should be 0.8 tons, in my experience with the project one of the pulley got crack because of too much weight.
*Use Checkered Steel Plate instead of plain steel sheet.
LINKS THAT HAS BEEN USED IN THE VIDEO:
YOU CAN SUPPORT THIS CHANNEL BY BUYING THIS ITEMS.
Machifit MGN12H Linear Rail Block:bit.ly/2WFBoyn
Machifit MGN12 600mm Linear Rail Guide with MGN12H Block: bit.ly/2HT4WVP
Machifit MGN12 1000mm Linear Rail Guide with MGN12H Linear Sliding Guide Block: bit.ly/2FSsVSF
8mm Bore Diameter Pillow Block Ball Bearing: bit.ly/2OJeHX3
7pcs 12mm Shank CNC Lathe Turning Tool Holder Set: bit.ly/2K4VBMy
G1/4-19 13x2mm BSP 55 Degree Tap: bit.ly/2TSVnrB
Titanium Coated Deburring External Chamfer Tool: bit.ly/2OG5HCi
Pillow Block Bearing: bit.ly/2uE97MG
Push-pull type fast clamp: bit.ly/2FQ5k3N
2032mm x 13mm Saw Blade: bit.ly/2QRKYQb
Handheld Copper Pipe Tube Expander: bit.ly/2rWa6pW
SBR20-1200mm linear rail and SBR20UU Blocks: bit.ly/2RiKUIC
SBR16 1000mm Linear Rail and SBR16UU Bearing Blocks: bit.ly/2GIcniW
Drillpro Turning Tool Post Holder: bit.ly/2EUban5
SANOU K12-100 Lathe Chuck: bit.ly/2TextHc
Slide Bearing Block: bit.ly/2RhZe4d
Slide Bearing Block: bit.ly/2Q6K4tU
20Pcs Diamond Coated Core Drill Bit Set: goo.gl/mPZ4B6
Opening Locator: goo.gl/sQmMce
LIKE MY FACEBOOK PAGE / pinoydiybuilds
SUBSCRIBE TO MY CHANNEL / sekaustria
AND SUPPORT ME ON PATREON / sekaustria
Like Share Subscribe for a Weekly Videos
Sir, i need a job in your project
Austria People with Muscle Shirts in the Winter Time... :-D
Very well done, and it can also be used as a height adjustable workbench. Nice! 👍👍👍
Cool ++++5
thanks man!
Good 🤝👍
Sir sek request po ako sana po mapansin mo air tank po sana. At mga kailan na gamit ..
noted brother
sa pagkakaAlam k0 Bro' mer0n ng vide0 nyan si Sir Sek, air compress0r ba.??
Air tank po sir
@@christianjacobenano6883 ok sir pasensya na
Okay lang po sir hehe...
Very well thought out and built. That lift is going to be saving people from sore backs for a long long time.
Excelente proyecto , una mesa elevadora divina de la muerte, me gusta mucho el calzado de seguridad que usáis, jajaja,un saludo cordial y por supuesto un gran like desde Narón, Galicia ( España)
Galing! Kabayat ing motor.
happy New Year ,hammer guy ,Everything for convenience!)
Cool! 👍
very nice. a many rolls and a children chair, haha!!!! Du bist mir son Österreicher... :-D
Nice winch lifter bro.
Btw Happy new year pala bro
Thanks bro. Happy new year den sayo. Ingat
Try ko ishare bro mukhang ganto gusto ng mga viewers ko.
Bro maraming salamat
Sir magkano po price nya pag omorder
kano lahat na gastos nyo kuys and mga tools na ginamit balak po namin gumawa ng ganyan for research po namin as AUTOMOTIVE STUDENT
Estimate ko lang nasa 15k up
Another worthy project. Now, cut a hole in the floor, and recess the lift. That will store it out of the way, but readily accessible for use.
sir SekAustria, nagreveal kna pala ng identity m0.?? btw tnx sa bag0ng vide0 m0.papanu0rin k0 t0
hahaha thanks brother
@@SekAustria galing ng ideya m0 sir sa pag gamit ng cable wire at pulley kaya lang sana sa susun0d p0 sir pwede ilipat ng pwest0 ang m0t0r para hndi maab0t ng tubig baha. tnx again sa pagpansin. xia nga pala c id0l Mr N0vruz nag k0ment din. id0l talaga.!!! hehe
Amazing my friend..
hydraulic would be nicer guy's
👏👏👏👏👏👍
👏👏👏🔝🔝🔝💖💖💖🌟🌟🌟🌟🌟🌟🌟🙏
31 Thumbs down to this awesome DIY piece or Marvel well did
Wow.. good build. That's pretty creative would have never thought of that
Excelente peeeero
ayos yan boss
Lupet niyan boss!
salamat bro
Turn your grinder over
Stop using the skinny wheel on the wrong side of the wheel very dangerous
its a bad example for al the newbies
👍👍👍👍👋
Great work!
Tremendous engineering skills and build! Thank you for sharing your design with us! Footnotes along the way as you build are very helpful. Logical design and use-ability for numerous functions in the shop.
Sir pede bang maka order niyang lifter para sa motor parts ko at magkano naman po
that is very well engineered! I think wheels would be very helpful on such a table
Está muy perfecta excelente pero para poder fabricar otra necesito tener esa a la mano x que lleva mucho mecanismo 👍👌🐂🐺
When you building a rocket to go moon?
Ha... that´s Children Toy!!! You must see The Real Life Guys. They are the real inventor (next Colin Furze)!!!!!!!
Amazing content. Keep up the awesome work.
Buen trabajo!! Os felicito!!
Hats off to you guys, well done. I've been thinking of getting a lift bench for some time. Looking at what you've put into making your lift table how did it compare price wise with a commercially available one?
VERY CLEAVE, GREAT IDEA. thanks for sharing.
Can you share the work plan details sizes and what materials needed ? I want to make one master
bossing galing .. mag kano magagasta jan bos ?
Super nice
very good
Ests genial lamentablemente ahi ciertas dimensiones que no muestran
fantastic.
Sir bat nawala channel nyo ng ilang linggo. Na strike ba kayo. Welcome back uli sir.
Nahack sir. Salamat😁
Galing talaga ng idol ko.. sana maka selfie kita idol...
😅😅😅
Hm manual jack?
Excellent work !!!, could you pass me the plans?
little conpressors and toy scooters are nothing..put a REAL
motorcycle on it...can it withstand 800 lbs. for 2hrs or so over and over or will it snap and dump the bike on the floor?
Too much wasted time to watch you weld the same over and over.
Thank you for posting this video. Very much appreciated. Naming the shaft holding bearings was great of you. Never knew what the parts were called. I feel like my projects are endless now. Thank you so much.
That's a lot a work I just bought a brand new one with side extensions for 2100.00 that more reasonable by time you buy the steel and all the other stuff
👍💯
good morning bossing pwede ko ba malaman kung ano sukat ng mga pagitan ng lift mo?
Good job my frind👍👍👍🤝🇮🇩indonesia
Bro malupet ang gawa mo. Galing. Saludo, hands down... Inspire mo ako to make my own. Curious lang, magkano nagastos mo sa build na ito? Congrats bro ulit sa content na kahanga hanga!!!
Salamat bro.
Roughly nasa 14k rin siguro kung wala ka lahat ng parts
@@SekAustria Salamat brother sa reply... Ingat and stay safe...
boss ilang hp or ilang kilowatt ang motor gamit mo? salamat
@@SekAustria sir gudpm
Waow mantap sangat kreatif sukses selalu GBU
with that ammount of block and tackle do you realize how much what you built can lift?
Lupet.mgkanobpo pagawa s inio..at mgkano
Is this really Austria ??? Or just the name. Greets from Upperaustria ..
Excelente trabajo, de lo mejor que he visto
нафига подъёмник для мотоцыкла? лом проглотили, наклониться не могут????
Amazing!!!!! for 1T differencies? for lift a Smart 450
since when is Austria using shit measure units, Duterte?
Hint: don't show the finished product at the beginning of the video.
It's like telling everyone *the answer to the mystery at the beginning* of the movie. jmo
Good day po. Pwedi po mag pagawa?
Thank you for sharing. Extremely well done. I'm inspired to perhaps build my own.
nice job, do you have material list with drawings?
Mantap sangat kreatif
pansin ko boss sek konting pinoy lng na-appreciate ng trabaho niyo.foreigners pa ang may gusto nito...para sa akin,exceptional ang designs at mga gawa niyo.excellent job!
Looks like factory made.
Bravi! Gran bel sollevatore. 👍🏻👍🏻👍🏻
Con misure, per chi volesse costruirsene uno in casa.
👍🏻🇮🇹🖐️
Can i ask...can you list all the materials to make this project...because i want to make for a student project
Boss sayo rin ba yung SKWAKOO na channel? Check mo parang ninanakawan ka
Oo bro sakin din yun doon ko pinopost yung mga diy vehicles
Saludo sa channel na ito
Napaka praktikal ng tools at materyales ang ginagamit..magandang sample para
Sa mta DIYers
Perfeito!! O melhor do UA-cam. Parabéns!!
Nice bro
idol, pwede pagawa sayu nyan?
Nagbebenta kayo pare ganyan?
Que buen video , es muy ingenioso y no requiere metal muy grueso, es eléctrico y neomatico, solo deben poner una abrazadera a la llanta delantera para seguridad y una correo de seguridad, muchas por compartir
schade das die welt so primitiv zu grunde geht
Super ! ! !😊
Hm pagawa?
Paano po mag order
Great job! Very clever solution! I wanted to make a scissor elevator with a wrench like you guys, but it ended as a plan...
How did you plan it? Did you use any CAD program? Another question: What about your channels name? It sounds like 'secondary school in Austria'.
Thanks for answering me!
mantab Deh,
Bhai kitne ka padega table
Tem pra carro?
Una muy buena idea! Los felicito!!!👍🏻👍🏻👍🏻👍🏻
Someone get this man a chipping hammer!
galing boss
Interesting video!
Thanks for sharing your knowledge!
Sir magkano po
serously....LOL
Nice job on the build. I think you should have placed a tire vise on the front of it. But at 9 minutes into the build, you could have used a better chair. 💺
Bagus dan sgt menginspirasi.
Magkano?
The scissor mechanism is well thought out.
I'd make the top a bit thicker and add a piece of "L" shaped channel to secure the front wheel.
*Well done over all.*
Nice work
What do you think is the maximum lift weight? Thanks
wow great job