you really got my attention when I saw the moor jig borer # 1 1/2 and then saw your in Poland. I ran a Moore #3 Jig grinder for 30 years. I was very impressed to see you using it what would be considered a home shop. Keep up the good work. I live in Anchorage, Alaska, USA, but did all my gig grinding in Chicago Illinois.
I made one of these ,out of 2x2 timber and ply cut out for dropping rear wheel out and a jack and point of leverage ,really gave me something to think about too .3 years strong and the hillbilly make up has save me thousands in repair costs and the 800 quid to buy one too.even i was amazed when it lifted a pan European ,although i tend to prop it at the front for heaver bikes
Thanks for another great video-the build/design/editing is spot on and as always, worthy of more 👍 than I can give it. Also, thanks for an amazing 2023. A year of new designs/builds [and humor] that we've all enjoyed. Looking forward to what you have for us in 2024. Happy New Year. *God bless.*
rewatching this after some time... maybe add a catch to the ramps to attach them to the lift, so they cant shoot out from under you if you drive something up onto the lift.
Great build! That things would be good enough to lift a Honda Goldwing... I really like the side extensions for the trike and the quad! Thx for showing and Happy New Year! 👍👍👍
The lift table that I made I used expanded mesh and 2x2 x1/8 for removable side extensions and left the centre section open to reduce weight , one hint that I would like to share when cutting flat bar on the bandsaw try cutting it in the vertical position much easier on your blades .
Uao bellissimo intro🤣🤣🤣; Ti faccio gli auguri di buon 2024 e che ci porti tanta fortuna e salute per continuare sempre con le nostre passioni e lavoro. CIAO AMICO MIO SEI IL MIGLIORE
Great demonstration intro why you needed to make the lift. I was like what the flippers? This guy is not serious....the bike will be a see-saw on that airbag jack how's it even going to stand by itself, but then i realized the story behind it all😂😂😂😂
You should add a hatch in the floor of the lift so you can change rear wheel without lifting the bike too high. Just remove the hatch and the wheel have somewhere to go.
This is a great idea and yours turned out great. Did you make your own plans for this lift or did you purchase them? Are they for sale? Thanks for sharing.
should have put a frame lift in there also, to supoort the bike when the forks are off, of it, or to lift a engine into place, but other than that, always great work
!!!!!Wow it,s amazing what ya can make for us to enjoy and make for our self,s and not costing arm and leg to build it ya produce skill builds thks for sharing your project with us ya got this signed up for adventure and l got front seats is ther plan,s for this build for us or we just keep turning bk the video? From Canada 🇨🇦 Sk keep it up be waiting for more to come😊
Thank you. The plans in this video are available to supporters, no matter what level of support you choose, you can download all the projects I managed to share :)
I couldn't buy the metal to build this. I know it's all about doing it yourself and the satisfaction of it. But here in the USA, I can but a motorcycle lift and modify it for half the cost of the metal. Sad but true.
It's unreal the material you can get for free with a truck and a craigslist ad; old exercise equipment, bed frames and all kinds of usable metal just for hauling it away.
Trzeba by było powzmacniać, wymienić kółka bo te napewno by takiego ciężaru nie wytrzymały, dać jeszcze jeden siłownik i rozmieścić obydwa po bokach ramion i jakieś dodatkowe zabezpieczenie wykonać dopiero w tedy można by bezpiecznie podnosić:)
Te najazdy które podstawiasz pod stół do wprowadzenia motocykla proponuje albo pokryć czymś antypoślizgowym albo chociaż ponacinać w kratkę szlifierka. Bo jak będą mokre albo kapnie odrobina oleju to ci się koło smyknie na bok i jeszcze cię motocykl przygniecie
Beau projet et belle réalisation au top 👌 Est-ce que je pourrais avoir les dimensions de chaque tubes ou plan ? Merci d'avance A bientôt et encore bravo 💪🙏
you really got my attention when I saw the moor jig borer
# 1 1/2 and then saw your in Poland. I ran a Moore #3 Jig grinder for 30 years. I was very impressed to see you using it what would be considered a home shop. Keep up the good work. I live in Anchorage, Alaska, USA, but did all my gig grinding in Chicago Illinois.
Nice job. I like the safety feature that prevents the table from coming down unintended. That is missing in many DIY lifting tables I have seen.
That is slick you need a set of half extension so you don’t have to reach so far to get to the engine on the trike great job
I don't have a bike, but I really like your lift. It's versatile, and strong enough to handle anything. Thanks for sharing.
I made one of these ,out of 2x2 timber and ply cut out for dropping rear wheel out and a jack and point of leverage ,really gave me something to think about too .3 years strong and the hillbilly make up has save me thousands in repair costs and the 800 quid to buy one too.even i was amazed when it lifted a pan European ,although i tend to prop it at the front for heaver bikes
Od samego rana czekałem aż ktoś doda jakiś filmik. Dziękuję za miło spędzony czas i szczęśliwego nowego roku.
Dziękuję 😁 Również życzę Szczęśliwego Nowego Roku 😀 Pozdrawiam
Great project! You are a talented fabricator! Keep up the fantastic work
Lift looks great. Those motorcycle engine powered 3 and 4 wheelers are awesome!
I love how you build things from scratch that I couldn't even build with a kit, a video manual, and a helper.
Thank you 😁 But I think you overestimate my skills, I'm sure you can handle it just like me or even better 😃
Great respect for making such a table, I have been thinking about making such a table for myself, and WoW, such a table, you inspire me
Thank you 😁
You are obviously a master fabricator. Great video and I will be purchasing your plans.
Best channel on UA-cam. This guy is genius..
Fantastic project, always enjoy watching your builds
Thank you 😁
OMG, I love that bandsaw. I need this in my life. Love the video and your skillset. You are very gifted!
Thank you 😁 This bandsaw model was my dream, but unfortunately this saw is not without flaws, or I came across such a model
Thanks for another great video-the build/design/editing is spot on and as always, worthy of more 👍 than I can give it. Also, thanks for an amazing 2023.
A year of new designs/builds [and humor] that we've all enjoyed. Looking forward to what you have for us in 2024. Happy New Year. *God bless.*
Thank you 😁 I also wish you a Happy New Year 😀
Regards 😀
Yep, you did it again. Another great video. Thanks for sharing.
Help full video
Nice lift! The fact it's universal makes it even better
Thank you 😁
rewatching this after some time... maybe add a catch to the ramps to attach them to the lift, so they cant shoot out from under you if you drive something up onto the lift.
complimenti! Grande lavoro ! Bravo.
Es cosa de romper barreras para lograrlo yo amo hacer estructuras y la verdad solo es impulso sin miedo 👏👍muy buena rampa para moto ingenioso
Nice job I'm really impressed how sturdy it is
Thank you 😁
Great build! That things would be good enough to lift a Honda Goldwing...
I really like the side extensions for the trike and the quad!
Thx for showing and Happy New Year!
👍👍👍
Thank you😁 I also wish you a Happy New Year 😀
The lift table that I made I used expanded mesh and 2x2 x1/8 for removable side extensions and left the centre section open to reduce weight , one hint that I would like to share when cutting flat bar on the bandsaw try cutting it in the vertical position much easier on your blades .
0:16 Дайте оскар этому АКТЁРИЩУ!!! :)
Nice work
Bravo! Complimenti davvero!
Excellent build brother!!!
Thank you 😁
Another excellent video and excellent job. As always off the freakin hook awesome fabrication.
Uao bellissimo intro🤣🤣🤣; Ti faccio gli auguri di buon 2024 e che ci porti tanta fortuna e salute per continuare sempre con le nostre passioni e lavoro. CIAO AMICO MIO SEI IL MIGLIORE
Grazie 😁 Auguro anche a voi un sereno, sano e felice Anno Nuovo 😀
Really nice lift
Brilliant work, dude! Really fantastic design!!! 😃
I hope you had a great Christmas!
Happy new year! And stay safe there with your family! 🖖😊
Thank you 😁 I also wish you a Happy New Year 😀
Regards 😀
Looks like thats going to serve you for a good while!
Well done! Happy New Year!
Thank you 😁 I wish You a happy New Year too 😃
👍💪 Szczęśliwego nowego roku!!
Dziękuję 😁 Ja również życzę Szczęśliwego Nowego Roku 😀
Pozdrawiam 😀
That’s really cool. Wow that’s a lot of work. Thanks for the video. God bless.
Thank you 😁
Great demonstration intro why you needed to make the lift. I was like what the flippers? This guy is not serious....the bike will be a see-saw on that airbag jack how's it even going to stand by itself, but then i realized the story behind it all😂😂😂😂
Thank you 😁
Drugi zrobisz lepszy.Brakuje okna na tylne koło i stabilizacji całego stołu.Podjazd też za stromy.Ja zrobiłem na wzór Corchi.Pozdrawiam
thats a really nice bild Hydraulic Lift !
thanks for sharing your video,s.
happy new year.
cheers ben.
Thank you 😁 I also wish you a Happy New Year 😀
You should add a hatch in the floor of the lift so you can change rear wheel without lifting the bike too high. Just remove the hatch and the wheel have somewhere to go.
Good job mister well done beautiful idea
Thank you 😁
Darn nice job I’m subscribing to your channel for future builds thanks
Thank you 😁
would make a good car loading tool as well
Sensacional! É muita inteligência para uma pessoa só kkkk
awesome job
Do u have plans available for any of your projects?
This is a great idea and yours turned out great. Did you make your own plans for this lift or did you purchase them? Are they for sale?
Thanks for sharing.
Was totally awesome watching you make that do you sell them?
Nice Moore jig bore . I have a sip and a newall👍
Thank you 😁
Success! Happy new year!
Thank you 😁 I also wish you a Happy New Year 😀
Very nice job bud 😁😁🤘🤘
Thank you 😁
should have put a frame lift in there also, to supoort the bike when the forks are off, of it, or to lift a engine into place, but other than that, always great work
Class 👍 love the trike 👍
Thank you 😁
!!!!!Wow it,s amazing what ya can make for us to enjoy and make for our self,s and not costing arm and leg to build it ya produce skill builds thks for sharing your project with us ya got this signed up for adventure and l got front seats is ther plan,s for this build for us or we just keep turning bk the video? From Canada 🇨🇦 Sk keep it up be waiting for more to come😊
Thank you. The plans in this video are available to supporters, no matter what level of support you choose, you can download all the projects I managed to share :)
@@WorkshopFromScratch thanks much for sharing l,m from Canada 🇨🇦 Sk keep you posted on this it is needed so much carry on
I want one of those motorcycle flipper-overers.
I couldn't buy the metal to build this. I know it's all about doing it yourself and the satisfaction of it. But here in the USA, I can but a motorcycle lift and modify it for half the cost of the metal. Sad but true.
It's unreal the material you can get for free with a truck and a craigslist ad; old exercise equipment, bed frames and all kinds of usable metal just for hauling it away.
But India is the only cheap old scrap metal seller
Great build!!! Excellent!! Where can I see the plans?
Thank you 😁 Plans are available to channel supporters and on Patreon 😃
Creative video, thanks :)
Beautiful job sir wish I had your talent
MM77 Approved 👍🏼👍🏼
Hola muy buen trabajo tú utilizas para elevar tu plataforma
Nice job
I will like to know how much you spend building it
Awesome again. Bro
Thank you 😁
Nice build.
Where did you get the adapter for the Magnetic Drill hole saws to fit a standard drill chuck?
Nice any plans for mat. Reqd measurements thanks
Congratulations, excellent work. Is a project available?
Thank you 😁
Tomorrow I will be available to supporters and on Patreon 😁
Really nice fab work. Did you have plans or just built it from your imagination?
Awesome!.....As always!!
Thank you 😁
Have you any roughly dimensioned drawing for this please? Great bit of kit
Happy New Year
Thank you 😁 I also wish you a Happy New Year 😀
Cool build can I ask how long build took you
Its a great looking bike lift
👍👍👍🏴🦕🦄😁🤞✌️
So cool!
Nice video
This is one of the best DIY lifts I've seen. Do you sell the plans?
Thank you 😁 The plans are available to channel supporters and on Patreon, regardless of the support level, there is access to all plans :)
Nadawało by sie tak pod auto ? Super robota. Pozdrawiam
Trzeba by było powzmacniać, wymienić kółka bo te napewno by takiego ciężaru nie wytrzymały, dać jeszcze jeden siłownik i rozmieścić obydwa po bokach ramion i jakieś dodatkowe zabezpieczenie wykonać dopiero w tedy można by bezpiecznie podnosić:)
Jak zwykle świetna robota bardzo dobry pomysł z tym podnośnikiem super
Dziękuje 😁
nice one
Slick build!!!
Thanks 😁
@@WorkshopFromScratch Got me to sub with the first video I watched lol
Bro, you can install your smart work in India,
India looking for such talent
Te najazdy które podstawiasz pod stół do wprowadzenia motocykla proponuje albo pokryć czymś antypoślizgowym albo chociaż ponacinać w kratkę szlifierka. Bo jak będą mokre albo kapnie odrobina oleju to ci się koło smyknie na bok i jeszcze cię motocykl przygniecie
Zbrakło mi materiału i zrobiłem na szybko z tego co miałem, są za krótkie i śliskie. Dlatego nie pokazywałem ich budowy na filmie 😃
Now imagine you don't have 200k in fab tools.
Beau projet et belle réalisation au top 👌
Est-ce que je pourrais avoir les dimensions de chaque tubes ou plan ?
Merci d'avance
A bientôt et encore bravo 💪🙏
now how you going to raise the bike wheels of the stand and clamp?
Elegancki podnośnik.
Jeśli można wiedzieć jaki był koszt w samym materiale.
Pozdrawiam
Dziękuję 😁 Szczerze mówiąc jeszcze nie liczyłem ale bez siłownika i pompy to napewno mniej więcej 1000zł
Зер гуд 👍
hello at 1234sec, you used this drill attachment for the rivet nut, do you have a link where i could buy this item? shout out from Dublin Ireland
Rất kỹ thuật bạn ơi! Tay nghề giỏi quá ❤❤🚸🔔😍❤️
Top demais 💯
Looks good! HNY
Wonderful work as usual. Where do you store all these creations?
Thank you 😁 I have all my projects in the second garage, but I'm running out of space
That intro though lol
Show de bola 🎉🎉🎉
Great build for commercial mechanic shops, but for your average guy, you can buh these lifts for a lot less than building your own.
The table cost more than the motorbike? Built for a WWII half track?
Where is the other hose of the foot pump connected?
Здорово ! Но на мой взгляд очень тяжелая конструкцияю
Hello friend, do you have another cylinder like this for sale?
Can you email a material list and the cost of the material? I am very interested thanks good job making lift!!! 73 dan
It is available on Patreon and for channel supporters 😃
Добрый день, вы в одном из видео сделали картинг. Можно ли приобрести у вас черчежи?
Maybe using diamond plate for ramps could be more secure
Jakie wymiary użytego profilu na rame?
Вот это мотивация. 😄