Це відео не доступне.
Перепрошуємо.

Jeep Grand Cherokee 2005 - 2010 Resistor | fan only works on high

Поділитися
Вставка
  • Опубліковано 31 січ 2019
  • Learn to quickly diagnose a blower motor that only runs on high.
    Make the call to replace only the resistor confidently knowing the rest of the circuit is functional.
    Check out how to diagnose a blower motor
    • Nissan Pathfinder 2005...
    Check out how to replace a blower motor
    • Nissan Pathfinder 2005...
    Again, thanks for watching and stay tuned for more diagnostics and repairs. 😎👍

КОМЕНТАРІ • 18

  • @Hugocraft
    @Hugocraft 3 роки тому +2

    Fan only worked on high for me so I removed the glove box without any tools. Then I was able to use the correct size torx bit in a long driver to remove the old resistor and replace it with a new one. All the speeds on the blower fan now work!

  • @sweetiepienumber1
    @sweetiepienumber1 5 місяців тому

    I'll need to remove the glove compartment... I would need to rig something with a thinner probe on my tester; tape or shrink tube and wire? My bet $ is just to replace the resister. Thank you for taking the time to share.

  • @MikeJones-ln9yj
    @MikeJones-ln9yj 4 роки тому +1

    Love the music, homie. :)

  • @UnknownMexicanMuslim
    @UnknownMexicanMuslim 3 роки тому +5

    FYI if you are here you can also completely remove the glove box no tools required

    • @Hoobz01
      @Hoobz01 2 роки тому +1

      Thanks mate
      I have the flexibility of a bridge column these days…
      Your tip made my day.

    • @Jramirez18
      @Jramirez18 Рік тому

      ua-cam.com/video/glj2rRY1Wx8/v-deo.html

    • @UnknownMexicanMuslim
      @UnknownMexicanMuslim Рік тому

      @@Hoobz01 glad to be of service

  • @jasonbeaulieu4979
    @jasonbeaulieu4979 2 роки тому +2

    Torx required is T15

  • @cheesenutz8135
    @cheesenutz8135 3 роки тому +1

    My replacement part doesn’t have screw holes ? Is that a problem

  • @lucacollins2592
    @lucacollins2592 4 роки тому +1

    Great video but I’m having a lot of trouble unplugging the wires to the resistor

    • @victorr2710
      @victorr2710  4 роки тому +1

      Try using a tiny pick to lift the locking portion of the connector while pressing on the release tab.

  • @genenichols9690
    @genenichols9690 2 роки тому

    What if it is stuck on high no matter what position the switch it in?

  • @vondaeahdiya
    @vondaeahdiya 4 роки тому

    What if the fan don't blow at all. Is it the blower also?

    • @victorr2710
      @victorr2710  4 роки тому

      If you unplug the fan and you get 12 volts and a good ground then yes it can be the blower. Try to give it direct power and it it powers up you can check the switch that turns it on

    • @elmervucetich4233
      @elmervucetich4233 4 роки тому

      How did you actually remove the old resistor, I can’t seem to find out how to take it off...

    • @dak8793
      @dak8793 4 роки тому

      Elmer Vucetich same

  • @osvaldomaldonado5680
    @osvaldomaldonado5680 3 роки тому

    need that song name for some art work I have to do in a few weeks. lemme know. Thanks 👍

    • @victorr2710
      @victorr2710  3 роки тому

      Song title is in video description