$300 vs $0 Fender Rolling
Вставка
- Опубліковано 15 лют 2022
- Thanks to CarParts.com for sponsoring today's episode! Get all the parts you need to get your car running great at bit.ly/carpartscomdiyordont
Can a wooden baseball bat roll fenders that same way a professional fender roller with a dedicated fender rolling tool can? We are rolling the fenders on our E36 BMW and while our professional David Pham (mrsexys2k) rolls one side, our resident DIYer Zach Jobe will roll the other side. which side comes out looking better, what do you think?
HERE IN MY GARAGE…
Curious what we use in the shop on a daily basis? Check it out below. And if you purchase these tools from these links, you’re helping support Donut. We appreciate it!
Milwaukee Electric Tools 2550-20 M12 Rivet Tool (Bare Tool) www.amazon.com/gp/product/B07...
Milwaukee - 48-22-0125G - 25 ft. Magnetic Tape Measure - 2-Pack
www.amazon.com/gp/product/B08...
Milwaukee 48-59-1880 M18 REDLITHIUM HIGH OUTPUT XC 8 Ah Lithium-Ion Battery and M18 /M12 Charger Kit
www.amazon.com/gp/product/B07...
Milwaukee Angle Grinding 2781-22 M18 Fuel 4-1/2"/5" Slide, Kit
www.amazon.com/gp/product/B00...
Milwaukee 2735-20 18V Li-Ion Flashlight
www.amazon.com/Milwaukee-2735...
Milwaukee 2557-20 M12 Fuel 3/8" Ratchet
www.amazon.com/gp/product/B07...
Milwaukee 48-11-1880 M18 REDLITHIUM HIGH OUTPUT 18v 8.0 Ah Lithium-Ion Battery Pack
www.amazon.com/gp/product/B07...
Milwaukee 2125-21XC M12 LED Underhood Light Kit
www.amazon.com/gp/product/B07...
Milwaukee M18 FUEL 3/8" Compact Impact Wrench with Friction Ring
www.amazon.com/Milwaukee-Comp...
Adenna Dark Light 9 mil Nitrile Powder Free Exam Gloves (Black), Large - Box of 100 (DLG676)
www.amazon.com/Adenna-Light-N...
Scott Shop Towels Original (75143), Blue, 55 Sheets / Standard Roll, 30 Rolls / Case (10 Bundles of 3 Rolls), 1,650 Towels / Case
www.amazon.com/Scott-Original...
Zep Cherry Bomb Industrial Pumice Hand Cleaner - 48 Ounce (Case of 4) ZUCBHC48CA
www.amazon.com/Zep-Cherry-Cle...
AIDEA Microfiber Cleaning Cloths-100PK
www.amazon.com/AIDEA-Microfib...
Barrow 52 in. Brown Large Rectangle Wood Coffee Table with Lift Top
homedepot.sjv.io/c/2095194/45...
Barrow 52 in. Brown Large Rectangle Wood Coffee Table with Lift Top
homedepot.sjv.io/c/2095194/45...
New to the Channel?
►Watch this: • POPULAR DONUT VIDEOS
We upload almost every day, subscribe so you don't miss out!
►Subscribe here: bit.ly/1JQ3qvO
Click here for more info on joining the Donut Underground!
► / @donut
Shop Donut Merch:
►www.donut.media/
Donut Media is at the center of digital media for the next generation of automotive and motorsports enthusiasts. We are drivers, drifters, and car enthusiasts who love to tell stories. - Авто та транспорт
What do you want to see us DIY vs Pro next?
Spoilers 😂
Jobe getting his hair cut by a barber vs James cutting it
@@Flowersbloomw Fr 😆
Window tint!
DIY vs Pro/manufactured straight pipe. That or DIY vs Pro suspension adjustment (toe camber caster etc)
Zack is back, this has made my week!
This video made my whole week, and I want Zack to make my hole weak 🥵
@@Ben-outdoors 🤨🤨😩
Amen! More ZJ
Let’s go!
@@Ben-outdoors 💀
I had David (mrsexys2k) roll my fenders on my slammed 08 accord a few years back. By far the cleanest rolls/shaves I've ever seen. You pay for what you get.
I have had him do two of my cars as well. three hours round trip for the sauce and will be bringing another here soon. mr sexy forever
stop calling it rolls, it’s just a shave…
Slammed Accord. Lmao. Full rice.
@@Asymmetrical-Saggin Haters gonna hate. 🍚🤙🏽
@@Asymmetrical-Saggin eh I think it's silly fun, never bugged me much personally
I had David do my fenders, good to see him get the recognition he deserves.
you've got 69 likes n i dont wanna ruin it xD
Now it's 169.
@@sharx7781
I made it 231, you can now make it 232. 😊
@@RealGalaxyGamers 239
Doesn’t he just cut fenders?
David’s done 3 cars for me so far and all came out perfect! He’s super knowledgeable on fitment and everything that goes along with it. It’s definitely worth every penny to get the flawless oem look with a lot more space!
One bit of feedback if this is going to be a regular series. Zach is relatively proficient using tools and techniques, maybe have third guy, a complete novice, to also attempt this and see how their technique and knowledge affect the outcome.
zach is skilled at like everything so a 3rd guy who would be the “noob” would be perfect haha
yeah, let james pumphrey do the noob part! :D
Not sure they would want a noob ruining their car
I feel like this would work a lot better in hi-low but yeah that'd be cool
we would need a car with three sides though
This is an only get one shot situation so 300 is nothing. Consider the prices a “don’t fuck it up” fee Lol
𝐒𝐩𝐞𝐜𝐢𝐚𝐥 𝐥𝐨𝐯𝐞 𝐜𝐨𝐧𝐭𝐞𝐧𝐭 𝐨𝐯𝐞𝐫 ❶❽ 𝐲𝐞𝐚𝐫𝐬 𝐨𝐥𝐝
Exclusive for *nude-datting.online*
He's the person I love, he's my light
day. The way the music flows and sounds
is extravagant and fun. Girls is
icon, legend, beautiful girl, princess, inspiration,
a star. I could go on and on, understand this.
I love NBA Girls.#垃圾
Sup dude, never thought I'd ever see you in one of these videos
A couple hundred to do it right, or a couple thousand to do it over.
@@carlosmmm2183 donut and corridor are my two most watched channels on UA-cam lol watch religiously lol
No bull, go do some UberEats for a week. $300 is peanuts.
Thank you for doing a comparison of pro vs diy on a budget vs diy with the right tool! I appreciate all the bases covered in this one!
7:15 "Does this help?" "Yeah, you're helping." Doesn't Zack know the labor rate DOUBLES if you help?
Another "$1.00 for swinging the hammer, $299.00 for knowing where to hit it" job.
Welcome back Jobe.
All your talk of hammers brought some attention
its 1 for the hammer and 143.50 from knowing where and 143.50 knowing how. But then again if you f* it up you gonna pay way more to fix it.
299 likes. allow me to swing the hammer too and make it 300
you guys honestly pick some of the best people to work with in the car community. bravo
Happy for David!
He’s a great guy, and has always done some good shit with my cars.
Dr Jerry! This was the best in video ad y'all have done yet. Thanks for the efforts!!
When I was 16 years old I remember using an aluminum bat to roll my fenders, three out of four of the fenders turned out nice, then I spent about $300 getting the one fender properly fixed. I learned my lesson always get the right tools for the job it doesn't matter if you're going to do it yourself do it right. Thank you guys so much as always for the amazing content
Damn, 4 bots in a row
I swear bots are the only things that really reply anymore
@@generalesdeath8180 yes. Lesbian bots seems enjoy to reply those.
Such an underrated comment. Rolling with a bat could go great for 3 of the arches and then completely wrong on 1.
If I'm a bot, I think I need a software upgrade 😆
$280 to have a pro roll 4 fenders sounds completely worth it. I'd never use a fender roller again and it would just take up garage space. Great explanation
when you find out that the guy just cuts the fender liner, the price is high.
You can buy a fender roller for 90 lmao it's not at all worth it to pay 3x as much
@@donsterr Tools cost ~150. Knowledge, experience, and time make up the other $130
@@GlorifiedGremlin If you know what you're doing and have a lot of fender rolling to do then sure. If you just have one car and you'll never look at the roller again, maybe just pay the pro to do the job and enjoy your afternoon off.
@@donsterr 👈 what he said ! I'm a panel beater of 14years. My customers would never let me get away with that!
Not to mention... He's rolling the arch so the liner doesn't need to be cut, you're pushing the metal away from the liner (most liners sit it the bit you are rolling). Just undo a few screws and pop the liner out completely, understand then there's less of an opening for dirt and water to get in... Which will eventually rot your arches out !
Awesome episode guys! Would definitely watch more of this ❤️ as a shade tree mechanic I've rolled a fender or 2 by hand. They were all on beat up mud toys so they didn't have to look good 😅 a fender roller seems like a solid investment just to make things easier.
A word of wisdom for the young stance padawans out there: most auto parts stores have fender rollers you can rent for a few bucks if you don’t want to buy one. 🤙🏻
Which stores? Cuz Autozone around here didn’t have one
@@c2cold4sho My local Advance Auto rents them out, and I’m almost positive the O’Reillys does as well. Upper Michigan here, so I guess stores in other regions may have different rental programs?
@@SandyNickk Thanks for the reply. Yeah, they must have regional stock differences, because Oreilly’s didn’t have one either. Advance is the one I forgot to check, so I’ll ask them when they open 👍🏽
@@c2cold4sho You ever find one?
@@ELY-qg2vn I didn’t go to Advance, I just ordered one from Amazon and it worked like a charm! I figured it wasn’t that expensive and I have enough friends with lowered cars or plans to lower that I’ll get some more use out of it eventually
Donut and Zach always come out with a banger series!
This episode is pro. Love the song you improvised, and this fender rolling guy needs to come back again soon. Zach can do anything, so it's not surprising that he had awesome chemistry with David, and the episode scenario-
I love the editing in these videos. At 6:55 when he's like "Where did all the dirt come from?" and just a cutaway to the car plowing through dirt was perfect lmfao
I need more of these vids! I learned a lot from it and enjoy watching it so much!
I'm always impressed with how great Donut nails their content, and how it manages to keep getting better over time when it started so strong.
This was one of the few sponsorships that I didn't skip and even enjoyed watching. Great job guys!
𝐒𝐩𝐞𝐜𝐢𝐚𝐥 𝐥𝐨𝐯𝐞 𝐜𝐨𝐧𝐭𝐞𝐧𝐭 𝐨𝐯𝐞𝐫 ❶❽ 𝐲𝐞𝐚𝐫𝐬 𝐨𝐥𝐝
Exclusive for *nude-datting.online*
He's the person I love, he's my light
day. The way the music flows and sounds
is extravagant and fun. Girls is
icon, legend, beautiful girl, princess, inspiration,
a star. I could go on and on, understand this.
I love NBA Girls.#垃圾
Glad it wasn't just me!
Jeremiah's energy in an ad is unmatched! He loves it and it shows.
I think it's worth mentioning that most auto parts stores will rent you a tool for basically free, so tool cost for one-off things like this can actually be a lot less.
Seconds into the diy section had me convinced that $300 for the pro would be money well spent! Saves finding room to store a fender roller until the next time I might need it too!
Or you could pay for it and then some by doing other folks fenders.
@@joshuagibson2520 Or split the difference: buy the roller tool, use it, then sell the tool to someone else who wants to do theirs.
@@MishraArtificer not a bad idea!
@@MishraArtificer even better buy it used to begin with. A lot of people don’t know about this but you can get vintage hand tools on eBay super cheap. (I’m not talking ancient I’m talking from the 70’s-80’s) we’re talking tool truck brands for $20 with free shipping. Just gotta find the right listings and a lot of people will let them go cheaper because they have almost all been listed forever and a day.
😂 😂 😂 😂 😂 This is one of the funniest video from Zack.... And Mr. Sexy added more comedy relief.... Really funny!
Hahaha😆😆😆how?
You guys find all of the most chill people and it gives me hope.
that was some really nice 3d animation!! looked really clean and simple, nice going!!
Donut media editors just keep inspiring me to up my production game 🔥💯😍
Man those lesbian bots are crazy
Came back to this vid this weekend when I swapped out 15"s for 17"s on my e36, bought a roller after work on Saturday and smashed out the rears with a hair dryer in an hour or 2. Worth the price and for future use I reckon.
I back the slow hammer! Add heat often and taking time with a padded dolly always works out to keep a real oem arch line . A roller unintentionally makes a slight pull no matter how gentle you make passes. Love these videos so much always learning and I know my input is just an opinion!
This is actually great, because idk if i have any pros in my area, so I'd have to roll the fenders on my S2000 myself. (also perfect that David has an S2K, had to drop a follow lol). This was a great visual on how to do it as well as how it would turn out; now I'm not too worried about DIY-ing mine! Great vid.
cant say I have ever liked a video just for the built in ad... you guys are killing it! and I haven't even seen the video yet
I love how you can always see the higher production value in each video. It keeps getting better and better
I was thinking about how to go about this the other day, sounds like buying the roller and slowly DIYing it is the move!
You can really tell this guy loves what he does! Smiles all the way❤️
Excellent series! Can't wait to see more
This is great, because I bought the fender roller and heat gun months ago but haven't done it yet. This is motivation to actually just do it before I repaint the car
Man the production really ramped up. So happy Zack Attack is back.
𝐒𝐩𝐞𝐜𝐢𝐚𝐥 𝐥𝐨𝐯𝐞 𝐜𝐨𝐧𝐭𝐞𝐧𝐭 𝐨𝐯𝐞𝐫 ❶❽ 𝐲𝐞𝐚𝐫𝐬 𝐨𝐥𝐝
Exclusive for *nude-datting.online*
He's the person I love, he's my light
day. The way the music flows and sounds
is extravagant and fun. Girls is
icon, legend, beautiful girl, princess, inspiration,
a star. I could go on and on, understand this.
I love NBA Girls.#垃圾
The one channel I'm willing to watch sponsors Good Job
Had David do my fenders! Dude is the GOAT. Craziest resume ever and super friendly and down to earth. Awesome convo while he worked.
Where is he from?
Zack flying on the onewheel was a cool surprise. I love mine, use it everyday to get to work while I work on saving up for a car
I love how Zach is just like my dad - hovering over the pro’s shoulder and interrupting to ask questions at every step 😂
Sometimes i just forget how cool you guys are. After some Donut rehab, you're still the best car channel i know for sure
I own the same fender roller he used. Many year ago I've been there done that with the bat method, a real fender roller is definitely the way to go. I also have the truck adapter and I use it pretty frequently on gm trucks. While truck fenders are much harder to roll, it works really well, just takes a little more time.
I love James, Nolan and the rest but Zach always makes my day.
Heck yeah, great show guys!
Learned a few cool things in this one. But the most important is how much I want one those stools dude had. That’s sick and the prefect height. I usually just sit on the wheel when I take it off but it’s very uncomfortable.
What’s the name of the stool
Awesome idea for a series. More please!
I am liking this new series idea, I'm trying to think of things to try.
I used to do it the 0$ way I learned the hard way 😂 haven't done it in a while
I've seen too many people destroy their fenders to want to do this myself. Even with a fender roller. I'd pay the $300 to not have to pay $1000 in paint work lol
I hope this becomes a regular series, great video
Great episode! It's like you were reading my mind!
As you were rolling the front, I thought "Hey, DIY does not mean doing it with a baseball bat! Rollers are like 60$!", and bam, you pick up the proper tool for the rear!
You guys are so creative with these ads, keep up the good work Donut team!
I’m 100% with Zach… I need that badass collapsible stool.
Any idea who makes it?
@@ellefields8878 amazon sells them. But traded some used moving boxes for mine.
LOVE the cinematography in this omg ya'll editting team is goated 🐐🐐🐐
There are many solutions to the fender liner clearance. I normally tuck the liner behind the new fold of the fender. That way you don’t leave a gap between the fender and liner as they did. Maybe in their case it was still gonna run so they had to cut. I’d use a heat gun to reshape the liner edge a bit if possible before I did that, and in some cases like my SRT-10 Ram, you just have to clearance a hole such as the area directly above the tire after doing a MAX front end (without control arm bracket fabrication) 2” drop with stock 22” rims & tires.
This is superbowl level commercial! Lmfao great content.
Feel like this series should be called “DIY or BUY” rhyme just sounds better imo
I love this idea for a show!!! Keep ‘em coming!! And honestly I’d like to see you guys do another episode of “Tool Party” again. That first one was great!
that was the best ad I've ever seen! awesome stuff!
Videos are getting sick boys! Keep it up 🔥🔥
New series?
Day 169 of asking Donut media to do either a Up To Speed or a Wheel house on the oil crisis
They obviously dont care 😂
The hammering definitely brought back memories of me "rolling" the fenders on my old subaru without heat while outside in the cold for some sketchy wheels I found on craigslist. With just a deadblow.
And let me tell you, you will crack your paint without a heatgun.
Great show! Keep 'em coming
I’m not cutting my hair until Zach does. 🧔🏽♀️
𝐒𝐩𝐞𝐜𝐢𝐚𝐥 𝐥𝐨𝐯𝐞 𝐜𝐨𝐧𝐭𝐞𝐧𝐭 𝐨𝐯𝐞𝐫 ❶❽ 𝐲𝐞𝐚𝐫𝐬 𝐨𝐥𝐝
Exclusive for *nude-datting.online*
He's the person I love, he's my light
day. The way the music flows and sounds
is extravagant and fun. Girls is
icon, legend, beautiful girl, princess, inspiration,
a star. I could go on and on, understand this.
I love NBA Girls.#垃圾
His mane is legendary
Day 285 of asking Donut to bring old B2B back
I’ve been saying for awhile, the new B2B is just Science Garage.
5:39 - "it seems like something you need patience for..."
Proceeds to have no patience to let him answer the question... 😂
Missed you dude, glad you're back!
Hmmmm interesting
As much as I love DIY, there’s certain things you should pay a professional to do. Honestly $300 ain’t bad for a job
David did my fenders as well, cool dude, came prepared (all the way from socal to norcal). Fabulous job for the right price
finally, more of him please!
You can literally buy the tool that does this for under $200 and still DIY 🤣🤣
If you buy it from Eastwood Company it's under $90 for the tool
$300 for 1h of work is insane.
I LOVE the idea of this show!!!! I really would love to see a DIY or not about rebuilding a 5-600hp small block VS just buying a new/used one‼️ Machine shops can get spendy QUICK! But the price of cams pistons and performance parts is quite reasonable with all the competition out there‼️
Excited for this diy or don’t series!!
Casually doing a wheelchair wheelie while talking...what else are you good at for no reason??
𝐒𝐩𝐞𝐜𝐢𝐚𝐥 𝐥𝐨𝐯𝐞 𝐜𝐨𝐧𝐭𝐞𝐧𝐭 𝐨𝐯𝐞𝐫 ❶❽ 𝐲𝐞𝐚𝐫𝐬 𝐨𝐥𝐝
Exclusive for *nude-datting.online*
He's the person I love, he's my light
day. The way the music flows and sounds
is extravagant and fun. Girls is
icon, legend, beautiful girl, princess, inspiration,
a star. I could go on and on, understand this.
I love NBA Girls.#垃圾
Congrats on being early and finding this comment 🥇
Literally the best ads I never complain these are entertaining af 😂😂
this channel gives me entertainment in my dark times thanks from the bottom of my heart
Squated trucks are pieces of crap
Yayyyyy Zach is back!!!! Couldn't be happier!
Amazing video guys. Keep up the good work
you guys are a legit group of fellas. That advertisement is hilarous! Hahah. well done on the series too. this is a good episode :D
cheers from western canada!
Interesting you post this as I prep to roll my fenders on my E36
My most versatile tool is my Dewalt Angle grinder. The first thing I did, day one when I bought my brand new ‘99 Civic Si is slap some 17” rims on it, drop it 2” and take an angle grinder to the rear quarters. To achieve a 0* camber, there was very little room to even roll. Did the same to wife’s 05 TL within weeks of taking delivery. Just be sure and use touch up paint at the cuts afterwards. Using tape as a cutting guide is a good way to stay straight.
I got mine done for $80 on my G35 for just the rear. Other than the passenger side cracking from rust it turned out really good
This way a really good add. Love it
This is one of my favorite if not the best show on donut. Zack is awesome
Buff Horses T-Shirt bit at the end was superb.
30 seconds into the video and I’m already thumbs up just cuz the commitment to these hilarious sponsor segments
Mr Sexy!!! Love that guy!! He did the fenders on my 65 mustang a few years ago, super nice guy and really great at his job. That’s awesome he’s on donut!
Wow such an amazing ad. I didn't want to skip it. Good job donut!! 🍩
I have done a few methods, pipe/bat, fender roller, papermagazine method.... tbh if you know what your doing with the bat and you raise/lower the coilover accordingly it works pretty good... you usually have to repaint it thou!
I made a roller years back scrap car jack and skateboard wheel worked ok. Also used a rag covered hammer not quite as good but did the jobs
When I first lowered my car I didn’t wanna spend the money so I just used a heat gun and mallet, it actually worked really well you just gotta be careful to not melt anything and not warp the fender