Instructions on how to raise the punch lever on the Kraton 8s and change the motor timing #arrmarc #arrma #rc #arrmakraton8s #kraton8s #esctuning #arrmakratonesc
Punch level has nothing to do with TopSpeed punch level is hell linear your power comes on with the punch all the way up the power comes on very fast with the punch level down the power comes on slower and more at the end of the throttle pool meeting is a little smoother. You would use a lower punch sitting in a low traction environment such as loose dirt hop lunch levels would be for hire traction situations where it is easier to hook up motor timing will give you more speed but it will raise your temperatures
Hi. I’ve followed every step you said. However you never mentioned the fact that now my controller isn’t connected to the car now and need re calibrating. Is this normal?
What’s a Esc server? I did exactly what you did. Now apparently the controller needs to be set up in order for the settings to be restored. I’m not sure if what you did actually worked if you never restored your controller to the car as the controller needs to know what the car is programmed in at?
Ok well since doing the updates my red light on the car is constantly flashing red when turned on. Which indicates that the car isn’t picking up the receiver anymore. Apparently I’m not the only person this has happened to. According to a expert in a local RC store near me.
@rcusa201 Thanks. It's been ages and it boggled my mind but the problem was that the receiver stayed alive while filled with sea-water. I cleaned it properly and it's back to normal. (Except a connection delay some times at start-up) It is not water proof he he
Best video I found explaining how to work the ESC settings.thank you for video...
Just bought my Kraton 8s glad I found your Channel
U gonna love that just gotta get rid of the controlled it comes with I got dx5 hiking up all of my 30 RCs to one controller
Punch level has nothing to do with TopSpeed punch level is hell linear your power comes on with the punch all the way up the power comes on very fast with the punch level down the power comes on slower and more at the end of the throttle pool meeting is a little smoother. You would use a lower punch sitting in a low traction environment such as loose dirt hop lunch levels would be for hire traction situations where it is easier to hook up motor timing will give you more speed but it will raise your temperatures
You mean you need HIGHER punch on dirt for quicker traction-release so you can more easily retain your power-slide. ;-)
Thanks bro you made it easy 👍🏻
Thanks for this. People just looked at the punch and skipped all over the motor timing. Talking about the truck slow.
Appreciate the tip!
That was a good video Bro. Thanks man!
You didn't do motor to timing to zero degrees you did it to 5 witch is 15 correct
Good man
Do you have the video driving at level 5 on the timing and checking the temperature?
No sorry
Thanks for the tips bro 💯🏎💨🏎
I did this just like you said and truck immediately started cogging smh any solutions?
Check ur settings maybe diff setting got off set
Or just buy a program card.
Nice whip brother 🤟🏻
What size pinion are you using mate I’ve got 21
I have to look but its stock I will change that eventally
How many times once you raise punch level it beep when you turn on
I ll check next time I put it on
@@rcusa201 what temperature do I want to stay around to be safe
@@anthonydupont3694 under 180
Hi. I’ve followed every step you said. However you never mentioned the fact that now my controller isn’t connected to the car now and need re calibrating. Is this normal?
NO I DID MY ESC TUNING SERVER TIMES DIDNT HAVE THAT PROBLEM BUT TRY BINDING THE CONTROLLER
What’s a Esc server? I did exactly what you did. Now apparently the controller needs to be set up in order for the settings to be restored. I’m not sure if what you did actually worked if you never restored your controller to the car as the controller needs to know what the car is programmed in at?
Michael Dunn it’s working fine for me I just did my friends truck to punch level 5 it’s working normal
Ok well since doing the updates my red light on the car is constantly flashing red when turned on. Which indicates that the car isn’t picking up the receiver anymore. Apparently I’m not the only person this has happened to. According to a expert in a local RC store near me.
Michael Dunn let me do research will get back to you.
Punch level is in your manual.🤦♂️
This is aids, my car can ONLY be BOUND or NOTHING. Does not stay bound.
Update the receiver I had this issue on outcast or swap out reciever
@rcusa201 Thanks. It's been ages and it boggled my mind but the problem was that the receiver stayed alive while filled with sea-water.
I cleaned it properly and it's back to normal. (Except a connection delay some times at start-up)
It is not water proof he he