Barracuda Dragcar: Driver Falls Asleep at the Tree!
Вставка
- Опубліковано 18 кві 2024
- After getting my new converter and transmission installed, it’s finally track day!
Check out more on the Red Challenger @RT211Racing !
Check out the full playlist on this car and where it came from. • Barracuda DragCar - Авто та транспорт
Looks consistent, good deal.I was able to go out for the first time in 5 years, what a rush.
Thanks Buddy! We gotta get together and race sometime!
Great video! I've had a lot of sleeping at the light moments this year for some reason😖....I tried to win out that day but didn't quite make it lol.... I agree that if it would have been good air and cooler you would been running mid 6.30's. And thank you so much for the shout out,I really appreciate it!😊👍
Thanks brother. Glad you got to earn some paper!
Nice day at the Drags Joe.
Can't win them all.
Still had fun.👍
That New transmission Drew built is working nice.👍
Thanks Ed! Been a busy day here!
Love that in car go-pro. That Cuda hassles. Purple people eater.
Thanks Buddy! It’s a blast to drive. I’m getting used to it now and more in my routine again.
you did great Joe! Car is fast and consistent!
Thanks brother. I’ll work on the driver 😂
As a chevy guy (still have stroker big boys and even a 65 small block muff-tang vert) that now owns a 69 Cuda under construction with a stroked 440 you help and inspire me to do better with it's outcome.
Thanks brother!
Very consistent! Good bracket car! Good to see a couple of other Mopars there too.
Couldn't agree more! Gotta polish that driver up
@@JustMoparJoe hey man you're human not mechanical. We're talking hundredths and thousandths of a second here. Doing fine.
Cars launching nice Joe, can't ask for much more :)
Thanks brother. There’s always more hiding, but I better wake up
@@JustMoparJoe haha everyone needs to relax now and then... you just picked a bad spot for it :)
Never mind Joe brother you still, had heaps of fun the car looks and sounds beautiful
Thanks Grand!
Looks like it's launching real good and running out good, keep up the good work joe.
Thanks 👍 Jeff
Car sounds good. Enjoyed the show. Tough luck on that last race.
Thanks Ron! Getting back in the swing of things
Good video, like seeing it running down consistently. You're a good driver Joe
I appreciate that. Knowing I can do better helps the sting of losing. But I was glad to make it through the day safely
@@JustMoparJoe yep, going home at the end of the day and having new knowledge is great and it also helps you didn't hurt the car too.
I can't wait to get back in the seat it's been a long time
Looked like a great time ,no brakes makes a great day 🎉 I'm sure you'll get it sorted, thanks for sharing, all the best to you and your loved ones
Thanks brother
Joe, I'll send you a sticker. Great video, sir. Nice driving
Thanks brother! Adam has my address
Very cool. Enjoyed it!
Awesome, thank you!
Hey Joe, never mind the loss, just knowing the Cuda is in test and tune mode there’s more to come. 😊
I feel like second gear has more rpm to stretch out, I might be wrong.
Nevertheless looking forward for a spin next video around.
Take care MPR J🙏🏽 👍
Thanks brother. I have been pretty conservative with shifts. Usually around 6,000. I’ll get there early someday and run her on up some.
I'm pretty sure you could shift that baby at 6500 on both shifts
@@Lipmonster I will take it out and see. Cam is fairly mild for a solid roller. Only 4,000-6,500 range. We kind of used it with keeping rpm down in mind, for less valve train wear and hopefully engine longevity. Also, I only have 210 cc runners in my e street heads. I wouldn’t say they’re high rpm designed pieces either. It’s been a good torquey combination so far. I am dreaming about going 4.56 gear from the 4.10
Enhoyed that. That Barracud is fast!
I appreciate that. Now to wake up’
Maybe next weekend
There’s always next time lol
BOOM BABY!
Thanks brother
Good to see the car is running great....good content and can't wait to see more...thanks👍
Thanks brother. I’m getting it together
I gained (dropped) .12sec by putting a fiberglass front valence (the original one was bent and really ragged) on my Demon and fabbing an aluminum plate with a riveted-on BG "air bell" radius and sealed it to the hood with closed cell upholstery foam around the perimeter. Made both changes at the same time, shame on me!! LOL
The air is real!
Nothing broke, Looks like You had a good time and that's what counts .
Yea sir!
Hey Joe, everyone needs a little shut eye now and then. Just proves you are human. I completely suck at racing, but I like to go fast and that means I'm having fun. Looking forward to the next track day. That Fish is looking Great.
Thanks brother! I’ll save it for the recliner next time 😂
Great stuff as always Sir Joe!
I appreciate that, Big Mike!
No nappin at the drag strip son.😂 from a 0.14 to a .109. Was the sun in your eyes. 😂 but as we all know so well that's racin. I had to add to this comment the fact your out there doing your thing is all that matters. It's a racer brotherhood and watching your friends go hit it is just fun. Thanks for the ride along. I am healed up now and back to work. Got a new truck to haul the hotrod too. Trying to upgrade so I can travel and visit some of the NNN boys
Very cool! I appreciate the support and have to get back on blue one
Joe do Believe your spot on with track conditions and air.
Thanks brother. It’s only getting hotter in Arkansas until at least September
Rubber side down is always a winner 🏆
Thanks Brother Brad!
Bad lights happen to all of us from time to time. But one thing for sure, you got a fast, consistent hot rod. That'll make up for a less than stellar light every now and then keeping the other guy honest.
Thanks T money!
I did the exact same thing at Centerville during the Pure Street event. Put myself out 3rd round. It happens! Cuda is very consistent though. You'll win some races with it.
Thanks brother
We are hopeful up here in Northern Canada to actually go out for a cruise this coming Wednesday for the first time this year 👍
Good luck!!
@@JustMoparJoe will post something finally next week. Made some changes on the ole Dodge over winter some people may not like
It’s time ⏳that matters Joe 😃👍🏻🇦🇺.
Thanks brother. It was a good day all together.
The car is doing great. Leave it alone.
But, but, but it could be…
Looks like you've gotten it consistent now good job ...Joe did you ever get to dyno that 440 everyone was guessing numbers on?
Thanks brother! They just got the new dyno headers in Thursday! It’s been a nightmare waiting game on them. I’m trying to g et on schedule in mid May
Oh man know how that is nowadays waiting on parts and the price even worse lol
@@Homegrown4406 they bought the headers with the agreement that I’ll bring more big block mopars to dyno 😅
Kool 😎
Sorry about your coma get well soon 😴💤💤💤
😂😴
Always a good showing.
Do you shift at different rpm from 2nd to 3rd than you do 1st to 2nd?
I try for 6,000 both ways
JMJ!💪🏻
Thanks brother
Nice launches and R.T.s Joe. Shifts are smooth and quick. What octane fuel do you run?
Thanks Mike. This is VP 110
You did good . That was just beginners luck on his part . Maybe it’s time to hook up that bottle ?
Haha! Bottle is in place. But it won’t make up for sleeping on the tree 😝
😎👍
Thanks brother
Im not gonna call ya "Sleepy Joe" 😅
Thanks Buddy 😂
I can see 👀 the jets not returned 😮
Go over and tell Michael Yielding 😂
What happened to the dyno 440?
They took 8 weeks to get the new dyno headers in! I’m finally on the schedule. I’m ready!
Shoot. I hope it wasn't becauae i wished you luck. Next time Joe, next time!
Haha! It was all me buddy
I thought you were making a sandwich 🤷🏻♂️
BLT, hold the L and T.
Try some nitrous, wood weee !
Haha! I’ve got a plate on still, but won’t need it for the bracket
Car is consistent! Your having fun! We all got to get our naps in sometime.... 🥱🥱
😂 Good luck with the Super Duster
@@JustMoparJoe yeah, they canceled due to the cold.... next week we'll try again!