Thank you very very much for this video Happy New year. Two questions pls 1.Do all cars have same ABs long code? values? 2.Do i need to seek the same way for Golf 5 and AUdi? Thank you very much.
Thank you for video it’s been huge help, I get all the way to the point of channel 026 basic settings.. at same point during those settings (second value) it fails every time, error 04. Any thoughts? Tried already making sure it was not getting hot
If you do all these steps and after everything is codes and adapted/basic settings. If I were to disconnect the abs module/pump. Will I have to do it all over again?
Here is my problem after mechanic shop change steering wheel rack, ABS / Traction control yellow light and ESP error show up. Address 03: ABS Brakes Labels: 1K0-907-379-60EC1F.CLB Control Module Part Number: 1K0 907 379 BE HW: 1K0 907 379 BE Component and/or Version: ESP MK60EC1 H31 0108 Software Coding: 113B200D212B00FB880C04E984190050310000
3 Faults Found: 01309 - Power Steering Control Module (J500) 008 - Implausible Signal Freeze Frame: Fault Status: 01101000 Fault Priority: 3 Fault Frequency: 1 Reset counter: 13 Mileage: 228813 km Time Indication: 0 Date: 2018.07.11 Time: 12:36:18 Freeze Frame: Count: 3 Count: 14 Count: 12800 Count: 8212 Count: 51968 Count: 0 Count: 1 Count: 47 01486 - System Function Test Activated 000 - - Freeze Frame: Fault Status: 01100000 Fault Priority: 2 Fault Frequency: 1 Reset counter: 13 Mileage: 228813 km Time Indication: 0 Date: 2018.07.11 Time: 12:36:18 Freeze Frame: Count: 3 Count: 14 Count: 12800 Count: 320 Count: 51968 Count: 0 Count: 1 Count: 47 00778 - Steering Angle Sensor (G85) 004 - No Signal/Communication Freeze Frame: Fault Status: 01100100 Fault Priority: 2 Fault Frequency: 1 Reset counter: 13 Mileage: 228813 km Time Indication: 0 Date: 2018.07.11 Time: 12:36:18 Freeze Frame: Count: 3 Count: 14 Count: 12800 Count: 166 Count: 51968 Count: 0 Count: 1 Count: 47 Group 60 adjustment status is not possible / steering angle sensor G85 N/A
scanned my long code from the old pump, plug in the new pump and put the code in and it rejects it, have tried another pump and it does the same. can’t figure it out, any help would be appreciated
We offer vehicle support for our customers on our free web forum: forums.ross-tech.com Post an Auto-Scan on the forum and we should be able to help out.
Hi I have a mk5 golf with an abs pump issue I have sourced exactly same abs pump with same numbers abs, Would i need to get this coded ? Any help much appreciated
Hi You need the original ABS pump still fitted to the car to get codes off the faulty ABS pump, You can then replace the ABS pump with a new one and have your codes transferred to the new ABS pump, Mine is still working fine no issues Even though it was removed from an ( audi A3 Second hand ABS pump ) I hope this helps
Hi, is anyone able to assist please? I removed and reinstalled the same cluster in a 58 Golf Plus and the abs code was wiped (not sure why) I found the code from an old scan but it won’t accept it it states code is out of range??
This worked first time. Loving your software and the support you offer to newbies like me.
Big help worked for me with no issues.
Thank you for posting this.
This info was so useful just brilliant
Thank you very very much for this video
Happy New year.
Two questions pls
1.Do all cars have same ABs long code? values?
2.Do i need to seek the same way for Golf 5 and AUdi?
Thank you very much.
thank you ...
How do you get the old Abs coding.??? 2013 vw Passat
Brilliant video, thanks
Can be the MK60E1 be retrofitten on a bmw e90 ,2l d ,rwd drive with MK60 ?
Thank you for video it’s been huge help, I get all the way to the point of channel 026 basic settings.. at same point during those settings (second value) it fails every time, error 04. Any thoughts? Tried already making sure it was not getting hot
Thank You (y)
Excellent video helped me to reprogram my abs module
Onde consigo solicitar um long code ou encontro a calculadora?
May I know, is this video suitable for 2013 1.4 TSI Scirocco? Thanks!
If you do all these steps and after everything is codes and adapted/basic settings. If I were to disconnect the abs module/pump. Will I have to do it all over again?
Can you help me with
Reset counter 49 on vcds
I get to 026 and it gives me error 004 no valv after the first step of calibration. abs module and engine bay were dead cold.
Hi Guys, I replaced module with a newer unit, coding accepted but after sleep mode lost his coding again , what I do wrong
Question, original long coding has 35 numbers and letters, while the used one won’t let me write more than 32. Maybe incorrect part?
Here is my problem after mechanic shop change steering wheel rack, ABS / Traction control yellow light and ESP error show up.
Address 03: ABS Brakes Labels: 1K0-907-379-60EC1F.CLB
Control Module Part Number: 1K0 907 379 BE HW: 1K0 907 379 BE
Component and/or Version: ESP MK60EC1 H31 0108
Software Coding: 113B200D212B00FB880C04E984190050310000
3 Faults Found:
01309 - Power Steering Control Module (J500)
008 - Implausible Signal
Freeze Frame:
Fault Status: 01101000
Fault Priority: 3
Fault Frequency: 1
Reset counter: 13
Mileage: 228813 km
Time Indication: 0
Date: 2018.07.11
Time: 12:36:18
Freeze Frame:
Count: 3
Count: 14
Count: 12800
Count: 8212
Count: 51968
Count: 0
Count: 1
Count: 47
01486 - System Function Test Activated
000 - -
Freeze Frame:
Fault Status: 01100000
Fault Priority: 2
Fault Frequency: 1
Reset counter: 13
Mileage: 228813 km
Time Indication: 0
Date: 2018.07.11
Time: 12:36:18
Freeze Frame:
Count: 3
Count: 14
Count: 12800
Count: 320
Count: 51968
Count: 0
Count: 1
Count: 47
00778 - Steering Angle Sensor (G85)
004 - No Signal/Communication
Freeze Frame:
Fault Status: 01100100
Fault Priority: 2
Fault Frequency: 1
Reset counter: 13
Mileage: 228813 km
Time Indication: 0
Date: 2018.07.11
Time: 12:36:18
Freeze Frame:
Count: 3
Count: 14
Count: 12800
Count: 166
Count: 51968
Count: 0
Count: 1
Count: 47
Group 60 adjustment status is not possible / steering angle sensor G85 N/A
Ford Falcon's are the best!
I’m getting No response from the controller what to do?
Hello, very good video, do you think this helps me to encode the ABS module of my GTI MK6 2013?
Greetings and thanks !
how did you go Rafael?
@@chaturanga In the end I bought the complete ABS module after sales and it worked for me, greetings and thanks
0@
@@Rafa-Rios can u elaborate on tht pls. Wht u mean the complete and module? R u even able to not buy the complete module??
Will thia code work for 2012 beetle
Hello. I want to buy the original diagnostic machine VCDS . from where can I buy it?
scanned my long code from the old pump, plug in the new pump and put the code in and it rejects it, have tried another pump and it does the same. can’t figure it out, any help would be appreciated
We offer vehicle support for our customers on our free web forum: forums.ross-tech.com
Post an Auto-Scan on the forum and we should be able to help out.
Hello, what means this code error 03409 on module 3 abs?
Anyone for audi tt 8j 2.0 tfsi manual quattro?
Whats the name of the tool used to code the new ABS unit ?
And where can I get it ?
Thanks alot
VCDS by Ross-Tech. store.ross-tech.com/shop/cat/VCDS/
Hi
I have a mk5 golf with an abs pump issue
I have sourced exactly same abs pump with same numbers abs,
Would i need to get this coded ?
Any help much appreciated
Hi did you have to code it in the end ??
Hi
You need the original ABS pump still fitted to the car to get codes off the faulty ABS pump,
You can then replace the ABS pump with a new one and have your codes transferred to the new ABS pump,
Mine is still working fine no issues
Even though it was removed from an ( audi A3 Second hand ABS pump )
I hope this helps
Thanks just need to find someone with a vagcom lol
Have an abs module that won’t take the coding but says it’s accepted any tips?
It may not save unless after coding you go through the basic settings and turn off the ignition.
You're ahead of me - I can't get anything to accept.
Hi, is anyone able to assist please? I removed and reinstalled the same cluster in a 58 Golf Plus and the abs code was wiped (not sure why) I found the code from an old scan but it won’t accept it it states code is out of range??
You need to get a new code from another car which has the same part number then try the coding.
Put a post on Ross tech have gave all the information on the new user post no luck however no one ever looks at the new user posts
Help me coding for audi a3 2007
Wont accept security access
Ciao mi servirebbe il codice golf 4 130 CV 1.9 tdi 2002 1j1 per ABS.
Hi do you offert services with team viewer please thnk you
What gen vw are you using
The car shown in the video is a 2012 Golf R. The car itself doesn't matter, MK60EC1 is MK60EC1 regardless of the sheet metal it was installed into.
How can I identify mk60e1 from mk60?
MK60EC1 is identified in the Component field.
@@jef4130 where can I find that?
@@veli-mattipatinen203 @0:51
So, there is no way to identify it without connecting it to some program?
@@veli-mattipatinen203 What kind of car do you have model + year?
One quEstion plz
Can I coding without the engine start?
Mk60