Good choice for a single turbo from Power Driven Diesel. A turbo blanket is a must have to save all the hose and belt exposure to exhaust heat, including a RWHP bump of 50-75 What type of cam shaft does your 2002 5.9L have? The Colt Cam Stage 3 or Stage 4 works very well for the VP44 injector pump fueled Cummins for managing EGT’s and Torque Management. Also, you should install a BD Diesel stealth plate for your VP44 injector pump to keep from loosing your engine prime when chopping the throttle. The Stealth Plate is the best $85 you’ll spend and takes ~ 1 hour to install. Lastly, highly recommend for a straight pipe setup a SteedSpeed exhaust manifold for your truck. 🏁👊
I have a 96 12 valve. I blew up my overdrive on my built trans as well but didn't get stranded thankfully. Found the snap ring in pieces on the bottom of the pan. Doing too many high way pulls and 4WD launches lol
did you replace the trans cooler and remove the check valve, flushing the cooler does not get all the crap out, also there's new ones out that have more cooling capacity, mishimoto/fleece.
that turbo flutter is really bad for that brand new turbo. What's happening is its jerking the whole thing on its shaft back-and-forth. if that makes sense. The compressor shaft . Quickest way to wear out a turbo. Only way to avoid that is to go easy on throttle when you're about to hit overdrive. Try to keep it from doing that as much as you can. I'm not sure how to fix that to be honest, besides a blow off valve, which would be difficult to hook up and a little useless, because that shift is so quick. I had a blow off valve on my Cummins hooked up to vacuum on a switch so I could manually dump the air right before I shift to the next gear.
Guys from power driven diesel know what they're doing brother
Finally SOMEONE WHO PROMOTES CLEAN TUNING!!!!!
Good choice for a single turbo from Power Driven Diesel. A turbo blanket is a must have to save all the hose and belt exposure to exhaust heat, including a RWHP bump of 50-75
What type of cam shaft does your 2002 5.9L have?
The Colt Cam Stage 3 or Stage 4 works very well for the VP44 injector pump fueled Cummins for managing EGT’s and Torque Management.
Also, you should install a BD Diesel stealth plate for your VP44 injector pump to keep from loosing your engine prime when chopping the throttle.
The Stealth Plate is the best $85 you’ll spend and takes ~ 1 hour to install.
Lastly, highly recommend for a straight pipe setup a SteedSpeed exhaust manifold for your truck. 🏁👊
I just realized looking at that aggressor you bought that I didn't tell them I wanted mine coated!! I just got the same turbo
I have a 96 12 valve. I blew up my overdrive on my built trans as well but didn't get stranded thankfully. Found the snap ring in pieces on the bottom of the pan. Doing too many high way pulls and 4WD launches lol
Great video work! Nice progress on the truck. Keep up the good work my friend!👍
Thanks 👍
Awesome work my guy!
You look great man lost some weight! Hell ya give that 24v some power
did you replace the trans cooler and remove the check valve, flushing the cooler does not get all the crap out, also there's new ones out that have more cooling capacity, mishimoto/fleece.
and what did they find wrong with the trans??
mdc diesel/smeding makes an awesome 60mm billet hx35 895$, i put one on my work truck that has a quadzilla and its amazing
Try a Banks tuner. Cleanest tunes I’ve come across. Good power and good mileage if you keep your foot out of it.
Maybe I missed this. What is the stall speed of the torque converter?
that turbo flutter is really bad for that brand new turbo. What's happening is its jerking the whole thing on its shaft back-and-forth. if that makes sense. The compressor shaft . Quickest way to wear out a turbo. Only way to avoid that is to go easy on throttle when you're about to hit overdrive. Try to keep it from doing that as much as you can. I'm not sure how to fix that to be honest, besides a blow off valve, which would be difficult to hook up and a little useless, because that shift is so quick. I had a blow off valve on my Cummins hooked up to vacuum on a switch so I could manually dump the air right before I shift to the next gear.
Yeah that’s what I’ve been trying to do, right before that shift, ease off the throttle. Most of the time it doesn’t do it now.
What are you going to do with the fleece Turbo
I might sell it, not sure yet.. I always end up buying these trucks, so might put it on something else.
Clamps should be 180 from the tightening point when using 2 together
What gauges are those
What transmission you got?
stage 3 47RE from Tier One transmissions
Sell me your fleece!
WT mod for the grounds
Tj can't tune shit