Thanks for this video. It saved my life, I was unable to program my t238 v3 optical. Now I got it. Before, I tried to do as in the old model with buttons that press the trigger and then plug in the battery, as your video I could see the right way. Thanks.
Got one problem, when I set the trigger to sensitive mode (number 7), the gun just doesn't shoot at all, the circuit is fine because there is sound when plugging in the battery and switching the selector, but it just doesn't shoot at all and I can't even get into the program to set it back to normal, do you know how to fix this problem? Thank you!
@@callsignprofessor 1.1 v3, the single board one. When I enter menu 7 it just beeps once. It never cycles options. I've tried pressing twice and keeping the trigger stopped at a short pull, but nothing happens until I long press, then it leaves the menu.
Hi there, I'm trying to install a 1.1v v3 in a G36. I have made all the cabling, also I changed the stock cables for 16g silver plated cable. When I connect the battery it gaves 3 beeps, but the trigger doesn't reacts when pulled. I'm aware that I could have to mod the trigger piece. My question is, when connected, does the DTU emits some visible light or it's more like infrared? Cause when I connect the battery, I don't see any light coming out the sensors, so I worry that I could broke the sensors or something like that. Thanks in advance
Hi! Yes it's infra red but if you make a picture in the dark of your mosfet powered up the camera should be able to pick it up. There's a post about it on the T238 Mosfet Q&A Facebook page if you like to see more details on how it looks.
Thanks for this video. It saved my life, I was unable to program my t238 v3 optical. Now I got it. Before, I tried to do as in the old model with buttons that press the trigger and then plug in the battery, as your video I could see the right way. Thanks.
Glad it helped you out 🙏🏼
Couldn´t u also use the gel blaster mag cables to power a tracer or as a (signal) wire for any kind of electric magazine?
Theoretically yes, it has been done even but not sure if it worked properly
im having overspinning issues with my dsg, it shoots twice on semi. do u know how to fix this
Could you suggest which version is the best in your opinion , for M4 of course. Thanks
I like the optical one but mechanical is fine too, not really a difference. Only if you go dsg then optical is best.
Got one problem, when I set the trigger to sensitive mode (number 7), the gun just doesn't shoot at all, the circuit is fine because there is sound when plugging in the battery and switching the selector, but it just doesn't shoot at all and I can't even get into the program to set it back to normal, do you know how to fix this problem? Thank you!
It isn't perfect but you'll have to open the gearbox and set the mosfet with the gearbox open. After that you can install it back up.
@@callsignprofessor yeh I think so, it's too sensitive to get my rifle fired lol, hopefully I could get through it after opening the gearbox
How do you select the options in menu 7? It only beeps once and stays beeping once.
Depends, what version do you have?
@@callsignprofessor 1.1 v3, the single board one. When I enter menu 7 it just beeps once. It never cycles options.
I've tried pressing twice and keeping the trigger stopped at a short pull, but nothing happens until I long press, then it leaves the menu.
Hi there, I'm trying to install a 1.1v v3 in a G36. I have made all the cabling, also I changed the stock cables for 16g silver plated cable.
When I connect the battery it gaves 3 beeps, but the trigger doesn't reacts when pulled. I'm aware that I could have to mod the trigger piece.
My question is, when connected, does the DTU emits some visible light or it's more like infrared? Cause when I connect the battery, I don't see any light coming out the sensors, so I worry that I could broke the sensors or something like that. Thanks in advance
Hi! Yes it's infra red but if you make a picture in the dark of your mosfet powered up the camera should be able to pick it up. There's a post about it on the T238 Mosfet Q&A Facebook page if you like to see more details on how it looks.
Many thanks man, I will look for that page, also, thank you for all the effort on your videos!
Does it have active break?
Yes it does 👍🏼
what have you got in that mp5? sounds very snappy. nice video:)
Thanks! Appreciate it🙏🏼 18:1 shs dsg with 24TPA and cyma fmr piston+head.
It does sound amazing! Almost like a high torque build but perfect.