Thank you sir! I ran the heater for like five hours and had tubed the spa heater off and the pool on. Didn’t see that when you choose V twice that it went from spa to pool …
Awesome. We were struggling with this after our easy touch quit working last night. The Easy touch got water in it. Do you know how to take apart and dry it?
Is there a way to leave the PUMP on "thermostat mode"? I understand the heater will shut down automatically once set temp point is reached but the whole thing only works with the pump on (obviously)... That means I need to leave the pump running 24hrs a day if I want to control the temp all around, even if the heater is not running 24hrs a day. Tks
it factors are 1) outside temp, 2) how hot do you want the pool, 3) the size or gallons of the pool, and what is pricey ? to keep it warm for one billing cycle all the time , thousand(s)
Does the easy touch system know to run the pump for a cool down period after the heater is turned off? If not, where is this setting located in the menu.
The EasyTouch can do a heater delay. To enable the delay: Press Menu, Scroll down to Delays and right arrow to select. Enable Cool Down by selecting Yes.
Definitely. You most likely have actuators on your suction and return valves. When you turn on the spa these actuators turn to isolate the spa. This way you only heat the spa.
Depending on the model of the heater, you might hear some relays clicking or a blower motor come on inside the heater and then you should feel heat coming out of the heater within about a minute and a half. If you don't then there may be some problem that needs addressing.
I'll take a stab and your question. I'd guess that either you have a spa blower and it is not working or if you have a natural venturi bubble system your air pipe is clogged. If you suspect that then take a shop vac and put it on reverse so the pipe is blowing...then attach it to your venturi pipe intake. That fix will push any water or debris out and allow air in again. If you like my fix, follow my icon and like/subscribe to my channel.
Thank you for making this so easy to understand and follow
You rock my friend! This was the ONLY video I found that actually helped me start my pool heater. Thank you!!!! 👍🏽💯😎
Thank you for making this video I show this to customers to help them learn their controller
Thank you sir! I ran the heater for like five hours and had tubed the spa heater off and the pool on. Didn’t see that when you choose V twice that it went from spa to pool …
how many blondes and gingers does it take to turn on a spa, only two thanks to you clint. we love you
Awesome. We were struggling with this after our easy touch quit working last night. The Easy touch got water in it. Do you know how to take apart and dry it?
Is there a way to leave the PUMP on "thermostat mode"? I understand the heater will shut down automatically once set temp point is reached but the whole thing only works with the pump on (obviously)... That means I need to leave the pump running 24hrs a day if I want to control the temp all around, even if the heater is not running 24hrs a day. Tks
how do you turn the spa on
How do yoU turn the spa on
Do you know how long it takes to heat up a pool? And is it pricey?
it factors are 1) outside temp, 2) how hot do you want the pool, 3) the size or gallons of the pool, and what is pricey ? to keep it warm for one billing cycle all the time , thousand(s)
hi, great video! thx. I was wondering if there was a way to heat the pool on a schedule. for example, turn it on only to hear on the weekends at 85.
Scott Anderman . Yes. just add a scheduled time for the heater.
I believe you can set a schedule for the heater just like you do for the pump.
Does the easy touch system know to run the pump for a cool down period after the heater is turned off? If not, where is this setting located in the menu.
The EasyTouch can do a heater delay. To enable the delay: Press Menu, Scroll down to Delays and right arrow to select. Enable Cool Down by selecting Yes.
It is possible to just heat the spa and not the pool? If I only have one heater for both of them
Definitely. You most likely have actuators on your suction and return valves. When you turn on the spa these actuators turn to isolate the spa. This way you only heat the spa.
@@ClintonCombsTPR how do I turn them both on so that both pumps are working?
Well-heeled do you turn the spa on lol
Press the Valves (V) button
If you not go back to main screen (heater not came on)
Not interested in spa. I just want to turn pool heater on including the attached plumbing.
I did this stuff, but I’m not hearing the heater is it supposed to be audible?
Depending on the model of the heater, you might hear some relays clicking or a blower motor come on inside the heater and then you should feel heat coming out of the heater within about a minute and a half. If you don't then there may be some problem that needs addressing.
como puedo conseguir este vídeo en español
Que necesitas saber?
How do I set it to cool?
hi clint
why won’t my bubbles turn on
I'll take a stab and your question. I'd guess that either you have a spa blower and it is not working or if you have a natural venturi bubble system your air pipe is clogged. If you suspect that then take a shop vac and put it on reverse so the pipe is blowing...then attach it to your venturi pipe intake. That fix will push any water or debris out and allow air in again. If you like my fix, follow my icon and like/subscribe to my channel.