Ep5. Install Glass Window In Fish Pond
Вставка
- Опубліковано 15 жов 2024
- This is the only time I felt very nervous in the entire backyard garden pond series. I have never installed a glass window prior to this and I am very excited that glass window is installed in the pond without any leakages. Before installing the glass window, I built a small frame on the inside of the pond where pond glass can fit. I covered the entire inside of fish pond with underlay and liner and pre-cut the liner where glass window would sit. This is something not many do but I thought to give it a go and it has been a successful pond window installation.
Pond glass cost me quite a lot, it is 25.5mm toughen and laminated glass with polish edges. Dims are 142cm in length and 62cm in height. I have used idealseal MS290 as a pond sealant and used 2 tubes in total. I was very confident with my initial bead on the inside but later on found out that it wasn't enough. I filled remaining areas from the outside without making any mess. Window shims were used to lift the glass slightly off the frame and area was filled with silicone. If you want to learn in detail how to install glass window in a fish pond then read my article here www.fishaholic...
Black paint around the glass frame, black silicone, black liner blends in really well. I decided to paint the top and 8 corner legs of fish pond black too. Let me know what do you think about this backyard garden pond and how good the glass looks at the front. I have some other landscape ideas which I will add to this series as I still have to build a filter for this pond and choose fish that could go in this pond. Let me know in the comment section your favorite pond fish.
This is not the best garden pond in the backyard but I have put in quite a lot of hours and energy into building this pond. I really hope you will enjoy this video and might inspire some of you to build your own above ground fish pond. Please let me know your views in the comment section below and share this video if you find it useful and informative.
Thank You
#gardenpond #diypond #fishpond
Very cool work, its going to be great looking through that big window
Thanks Genie, once I build a filter then might add some Orandas in the pond.
@@Fishaholic nice
VERY, VERY IMPRESSIVE my friend 🤗😁
Thank you Colin, am glad everything work out to the plan.
Great, thanks for posting. I am starting a water wall with projected spillways and glass trough. This is inspirational.
Appreciate your positive feedback and wish you all the best with your project
@fishaholic I'm in california wondering where you order the glass from?
Hi John, I ordered the glass locally in Melbourne
This is great info. I am planning on making all my own larger indoor tanks with this style. I have been very nervously trying to find a way that is tested and that will actually show me the products used so thank you.
Hi, its better to watch as many videos as you can so you can get the best information before proceeding with the built. Appreciate your feedback
Real nice job.
Thank you Tommy
the video is great, excellent work, greetings, from Spain, your friend 👍10
Thanks heaps, appreciate it
Amazing job.
How do you install the liner?
Do you glue it together in the corners as to not have any folds?
Great work dude….it’s gonna look ace with that window when it’s full of goldies😀😀👍👍Congrats on the 20K too Mate!!
Thank you heaps, 20K is a big milestone, appreciate your support the entire time
@@Fishaholic and we appreciate yours sir….it’s been a fun ride😀😀👍👍
Amazing pond mate!
Thank you, really appreciate it
Man, I'm excited and it's not even mine haha
Thank you Heap, am happy that its holding water. Not bad for a first timer lol
Awesome work. What’s type of glue you are using for the pond glass to stick on ? Why there are two blue plastic piece at the bottom? Thank you
Hi Ryan, adhesive is idealseal ms290. Thank you for your feedback
I used shims to raise the glass temporarily so I could squeeze IN some sealant
Hi looking to do a similar job in the UK. Did you just over lap the liner into the window frame then glue/seal the window into the opening then fully seal the back edges?
Thats right, glass is sealed to the glass and all the gaps between glass and window frame filled with the sealant.
I just bought a giant second-hand fish tank instead and built a wooden frame around it but thats a still a good demonstration how its meant to be done.
Very smart thinking, multiple viewing windows.
I am following your videos to build my pond in fl . Is it possible to get a little more info on installing the window. Im watching the vids and thats the only part that needs clarification for me.. after the underlayment n the pond liner is put in , do u stick the pond liner to the edges of the window frame before placing the window? Do u hold the window in place after u apply the silicone?
Hello, yes I stuck the pond liner to the frame so it doesn't move. Only minimal silicone was used at the corners.
Apply applying silicone and placing the glass. I have used a piece of timber to hold the glass from falling back. Glass was placed in the window frame I have created.
looking good
Thank you Amanda
Great job
Really appreciate it, finally its done. Now working on a filter for the pond.
Hi. Can I ask where you bought the window glad and was it a custom sized window and was it expensive?
Thanks
Hello, Glass is 25mm toughen and laminated. Cost me AUD 784 at that time. Bought it locally in Melbourne. I don't exactly remember the company. Did a good search and found a few suppliers, and I just picked one with a cheaper quote.
What a great pond, Love it, If you don't mind, roughly how much will it cost? I like to try that ne. Great Job.
Hi mate, it would have costed me somewhere between 4-5 grand. Expensive part of this build was glass and pond liner. Timber prices have gone up in AU and would have costed me around 1 grand. I did overkill it though. Thank you for your feedback
Congratulations beautiful
Thank you David
It's been a while. You should do a update video. What would you have done different, how are things holding up, etc...... Thanks!
This pond is so amazing! I've just been to B & Q in the UK to start ours tomorrow morning! Quick question if you don't mind... What is the purpose of the insulation inbetween the MDF and the cladding? It doesn't get too hot or too cold in the UK really so not sure if I would require it. Unless it aids with the moisture control? Thanks! :)
Hi mate, its my first pond build so can't say anything based on experience. But added styrofoam so reduce heat transfer which inturns will reduce moisture transfer. Hope it make sense
@@Fishaholic oh really? Looked like a natural! Thank you very much, I think I'll follow your steps as well on that part. Thanks mate!
Hi also looking to build one in the UK. Can I ask how did it turn out?
Wow so cool !
Thank you Clara
What silicone do you use for window please.
Hi Gareth, It's an idealseal ms 290 easily available in Australia
Omg cnt belive thats your first I'm on my 4th nd having real trouble for over 2 years on my windows thort it was sorted transfered all fish took down old 1 and then it broken the cross supports splut and leaking all around my left window can't get it sealed for the life of me poor fish now in shty plastic pond y look to restart this 😒 following I think mayb need to do just found ur vid
Hey mate, sorry to hear that you have had a bad experience. Mine is year and half old now and doesn't have any issues. Hopefully, you find this video helpful.
What is the size of this pond??
Hi Jake, I believe approximately 2.2 x 1.1 x 1.1 'LxWxH' in meters
Screws held together with wood and glass fitted totally opposite to what other Bearded Brit 'experts' on ponds say on UA-cam.
I am not an expert. I did it the way I felt was right to do. My first pond, of course, has been up for 2 years now without any issues. Appreciate your time
Good job! Massive pond/ tank. How many gallons?
Cheers mate, its around 650 gallons
@@Fishaholic nice!
Professional Water Pump Supplier!
3 years warranty !
CHS-30000 DC 36V variable frequency DC pump,
New product of 25-160CBM/h will be lunched to market soon.
Why would you put the ridge side of the decking timber facing out?
If you were going to use corner pieces as trim, you should have cut the horizontal pieces shorter instead of screwing the corner trim on top of it and having it stick out.
The corners could have also been ripped down on a 45° angle to make a decent looking finish instead of just butting them together.
Also there are plenty of cheap silicone finishing tools out there to use instead of a pencil.
Should have covered the corners, get water ingress.
Never mind, I got the name of silicon from this vid thanks
No worries, irrigation stores sell these too. I bought mine from smart water.
@@Fishaholic thanks
can i put turtles in this?
It is big enough for turtle and goldfish.