Hey what thickness of glass would you recommend I get I’m wanting to put in 2 windows in my pond one 1.8m x0.5/0.6 and one 2.2x0.5/0.6 (I haven’t finished block work 😂)
Brill vid I'm gonna do a box welded liner block pond around march time and not seen the blocks cut on other vids like this and was wondering if that could be done and you've just answered it I've emailed you for a quote on liner and a window
Hi, by the time you've got the liner in after it tends to move the underlay a bit, it's not very hard doing it this way and saves taking it all out and getting creases in underlay if you mess it up.
That's exactly how I've just installed mine and it worked a treat 👍
I like it! Definitely going to use this method on the next project 👍🏻
You should!
What sealant did you use here?
I wonder if liner repair tape would work well around the window with a more finished look?
Is box weld a better than liner but cheaper than fibre glass, how ease would it be to install a window in an established pond ?
How much did that pond cost roughly without the pumps,filters etc
Ive noticed the liner seems a little big should i order it say little smaller than the actual measurements of the pond ?
If the pond is square it will fit perfectly, just supply as accurate measurements as you can for the best fit
Hey what thickness of glass would you recommend I get I’m wanting to put in 2 windows in my pond one 1.8m x0.5/0.6 and one 2.2x0.5/0.6 (I haven’t finished block work 😂)
@@nasovlamingi upto 2000x600 is 25.5mm, you can price on our website www.cwdsandbach.co.uk
The 2200 we'd say 33m or reduce to 2m
Thankyou for the video, where did you pick up your pond liner from would like to order some myself
We supply everything, message us via cwdpond.com for prices
We're they three glasses joined together?
Can any glue be used to stick the pond linner?
We reccomend mypond ms300
Brill vid I'm gonna do a box welded liner block pond around march time and not seen the blocks cut on other vids like this and was wondering if that could be done and you've just answered it I've emailed you for a quote on liner and a window
Glad you found it helpful Andy 👍
How long does it need to be left before you can fill after installing a window this way ?
We advise 48 hours minimum
How many cm is the edge on the concrete block?
Why don’t you cut the underlay round the bottom drain, before fitting the liner?
Hi, by the time you've got the liner in after it tends to move the underlay a bit, it's not very hard doing it this way and saves taking it all out and getting creases in underlay if you mess it up.
@@cwdpond fair enough 👍
When I used underlay on mine I cut it around the bottom drain first then used sorry glue to hold it in place worked a treat 👍🏻
How thick was the glass?
Why use sealant on the flange? It's not holding any water back surely, that's all taken care with the join between the liner and the bottom drain.
Leaking looding :)
I DONT KNOW ABOUT THE LINER, I"D DO EVERYTHING THE SAME... EXCEPT USE CEMENT SEALER AND SWIMMING POOL PAINT
Why dont you put the liner in the window recess first and put the window in after on top of the liner?