Another great video, Nick! What a great little quad! You're not only a real ambassador for Quadmula, but also for our community. Your willingness to help and share your knowledge (including your drive files) is truly appreciated. Love this little beast! 👍❤
I just got mine delivered from the restock. Building it with flywoo Goku 45A AM32 stack, Flyfish 1404 4500kv, O3 and Happy model EP2 receiver and Flywoo Nano GPS. I also like the HQ prop 2.5x2.5x3 blade snub nose props. Flyfish motors are getting about a 100g of thrust rating extra than the usual tmotor 1404s everyone throws on these frames.
I use your diff. For my Djinn and it flies really great. Thanx for sharing your configuration. Bye the way my Set up is 4 s with t Motors 4600 kv but it works really good. I fly with 4 Blade Props and will 3- Blade give a try. Happy Flying 👍🏻
The handrail gap full send at the end was the topping on the cake for sure. Most people do those gaps like half that speed. Im thinking this smaller form factor over 5 inch is amazing.
Awesome shots Nick! I damn near want one of these all of a sudden. I started out on 2.5 tinyhawk and never really had the urge to build something that small
That's what I'm loving 1404 on a 2.5 inch build with 6s that's my next project frfr I'm loving the new fad of everything coming out is small and powerful. Keep it up Nicolas
4" version would buy . I have a few 3" and 3.5" but seem to always fly my 4" builds as they faster and longer flight times ( even on 4s ) can hard freestyle it for 6mins plus
I know the Djinn line is a new line of frames they are rolling out for 2024 starting with the 2.5". I imagine they are planning other sizes but haven't heard anything official yet. A 4" would be pretty awesome.
Great Flying🎉nice to see the control on the sticks. Powerful Little ripper. Fly this quadmula with 4s and it makes a lot of fun, but 6s will be my next project
I personally think anything bigger that the 650mah packs are too much weight. The power to weight ratio really matters in terms of punch. I get the best performance out of this quad with the 380mah packs. I would much rather have that level of performance vs longer flight times. I freestyle so flying longer means nothing to me if I can't move the quad the way I want.
Holy fuck Dude! You definitely are the best fpv FS pilot. No bullshit I'm not on some weird shit, your the shit bro! Finally some good music for what FPV is. An art form.😮
İts amazing setup bro thank you specially 3 blade props really different from 4 props. 4 props have prop wash and shake. 3 props have no prop wash or shake thats amazing and thank you for pid tunes
Yeah 4 blades are always like that in my experience, even on 5". It's great for when you just want to cruise for 7-8 minutes and get some nice footage with the larger 650mah pack.
@keither19841 I primarily use these props because I fly it with the GNB 380mah 6s HV packs. Less flight time, but it just flies better, in my opinion. www.racedayquads.com/products/gemfan-flash-2540-tri-blade-1-5mm-shaft-choose-your-color?currency=USD&variant=40530696175729&stkn=ed68f1cb6bdd&tw_source=google&tw_adid=&tw_campaign=18177138426&gad_source=1&gclid=CjwKCAjwm_SzBhAsEiwAXE2CvxrkYZGSw-nTOKEjeNju91my4GnvzMN5Na6QLqzJgPgrpnO-oVoGyRoC3ogQAvD_BwE
Amazing flight skills and a very nice build! I just got the same frame. Could you please tell me where I can find all of the TPU files for Djinn F25 to print?
From the 5 frames I've build yet, the Quadmula (SF 3S) was the nicest to build with its labeled screw packs etc and the quality is top notch. BUT: they are just too heavy for small stuff and not being able to fit AIOs (25x25) makes them heavier again. 250g 2,5" should feel equivalent to a 1100g 5" looking at Rossers disk loading chart. As much as I like small drones, I think thats not the optimal way for most people (didn't try it though).
Looking at building one my self. if I use the same build but with the dji controller 2 will the betaflight file you have done still work. Thanks for the great vids all the best
You can definitely do that if you can find one. Quadmula has a 3D print repository for their designs as well if you're trying to find something. quadmula.com/pages/3d-print-file
Awesome, thank you! Definitely answered my question about all the little things. Is the djin25 the same as F3 you built just shorter arms to keep props out of view? Can I put 3" arms on my 25?
I've just done a similar build myself after watching your video. It flys great! Thankyou. I did notice your picture on Quadmula's website, are you affiliated with them at all?
Hey man awesome video. Because of this I decided it's time to pull a trigger on my own drone and build my first one so I'm copying your build here. I bought batteries that I thought were the right ones but they are XT30 can I use that for the ESC? If I change the connection
Thanks for the great video, sharing your insights and knowledge! Mind me asking what are the STL files for the Djinn? Mainly looking for the short O3 antenna and the short radio antenna holders. Sorry if I got confused! 😅
The Djinn specific STLs www.printables.com/model/616992-quadmula-djinn-f25-series/files The rx antenna holders for the F3/35 work for the Djinn www.printables.com/model/314165-quadmula-siren-f3f35-series/files
Sorry about that. My Google Drive has been acting dumb. I'll be able to put all the files back in there on Friday when I'm back from a work trip I am o.
@TW-pq3hn depends on what you want. For a great, compact, sub 250 ripper with max FOV, Djinn 2.5. For the best flying sub 250, SF3. If you just want a micro that rips hard and you don't really care about sub 250, SF3.5. You can build a 3.5 to be below 250g, but it impacts flight feel enough to not be as enjoyable, in my opinion.
Exactly! My aos 3.5 o3 on 1507 2700kv 6s rips harder than any of my 5" rigs, and those all run tmotor f80 pro's 1900kv on 6s... 3.5" can be insane if you build it right. But I'm really interested in building one of these 2.5's, just to guerilla freestyle something smaller with an o3.
Do you have a tune or file for download? Im copying your exact build(its to badass not to). Last oarts shoukd be in mid next week so no rush. Its my first full build and tuning/setting up still shows my green side. TIA
If you like the gemfan 2540 then you must try the geprc 2523 props. I guess they are made by gemfan. Awesome really. When are they bringing out a 3.5" or 4" frame? Basically they just need to make longer arms
Nice sick flying. I have recently built a djinn25.. with your tune and BLHeli configuration. Are the vibration at lower rpms normal on this quad? I don’t have eis nor rock steady
Awesome Video! I came across this when i was about to purchase the siren F3 split only to be out of stock! If you have a choice between only the 2.5 or 3.0, what would your pick be?
I have tried all the camera fov options and the frame was not in view in any of them unless of course you're using a 50° camera tilt. You do need to push the camera as far forward as you can in the camera plates.
Your tracer is crossfire right? Which elrs tracer do you recommend for this build? Sorry for the probably dumb question it's first quad I'm building myself.
Have you tried this frame with 4s? Lots of people are telling me to go 4s on it. What is your opinion. Will it be good on 4s or is 6s gonna be a lot better? @@MurdersFPV
Came here to see the frame.. stayed for the flow.. Lovely footage!
5:25 takes some serious balls to try that, respect! 😆
First and only try. 🤣
love this build - great job
how is it compared to your split F3 with the 1604 motors? on the footage it looks very similar how they fly.
Another great video, Nick! What a great little quad! You're not only a real ambassador for Quadmula, but also for our community. Your willingness to help and share your knowledge (including your drive files) is truly appreciated. Love this little beast! 👍❤
Thank you so much. I've always just wanted to see other people having as much fun as I do with the hobby.
Awesome. That boardwalk shot was sick.
Wonderful flight Dude ! with the music that fits perfectly ! 💥💥💥💫and it's incredible what you can do with such a small drone like that !
I’m buying just because of the way you killed it in the flight clips! Dude that is some serious skills I am aspiring to fly like.
You absolutely killed that flight edit. Perfect music and rippage 🔥🔥🔥
Your setting are dialed it’s locked in just right. Thank you again
I just got mine delivered from the restock. Building it with flywoo Goku 45A AM32 stack, Flyfish 1404 4500kv, O3 and Happy model EP2 receiver and Flywoo Nano GPS. I also like the HQ prop 2.5x2.5x3 blade snub nose props.
Flyfish motors are getting about a 100g of thrust rating extra than the usual tmotor 1404s everyone throws on these frames.
I use your diff. For my Djinn and it flies really great. Thanx for sharing your configuration. Bye the way my Set up is 4 s with t Motors 4600 kv but it works really good. I fly with 4 Blade Props and will 3- Blade give a try. Happy Flying 👍🏻
this is one of the best freestyle flight soooooooo smooth i have ever seen...maybe in a few years i can reach a similar level...congrats
the quad looks nice but OMG that flying, incredible!
The handrail gap full send at the end was the topping on the cake for sure. Most people do those gaps like half that speed. Im thinking this smaller form factor over 5 inch is amazing.
I would love a 3.5 version of this but this seems cool
Have you seen the Siren F3 split? Check out Murders video on it, thing is just too sweet.
@@jimmyarroyo356I point the f3 split… omg it’s a blast to fly!!!
You flown St. charpu 😍😍😍 ,this little bando killer looks great!!
Love the little HD platform options that we have these days! Can rip em anywhere and have a blast!
Great flying as always dude!
It's crazy what we can do with these small drones and the power of the O3. 8 minutes of cinematic cruising is a lot of fun with this thing.
@@MurdersFPV just insane progression of these little guys for sure!
You got down on that one. Hard to believe it’s a 2.5 on 6s. Kickass!
Your flying skills are out of this world. Amazing 😮
Sick rip bro, appreciate the concise review. Definitely interested in your 6s setup
Awesome shots Nick! I damn near want one of these all of a sudden. I started out on 2.5 tinyhawk and never really had the urge to build something that small
That was so good! I need this! Unreal what you can do
So awesome - hopefully they restock soon. I really want to do a “3 build
Wow, what a flight montage 😮 awesome stuff dude!
That's what I'm loving 1404 on a 2.5 inch build with 6s that's my next project frfr I'm loving the new fad of everything coming out is small and powerful. Keep it up Nicolas
Holy cow you were cookin when you went through your legs 😂🤘🏻 that little thing rips great with you behind the sticks
Ha yeah that was a first and only spur of the moment attempt 😅
You make that micro do WORK! ❤❤
4" version would buy . I have a few 3" and 3.5" but seem to always fly my 4" builds as they faster and longer flight times ( even on 4s ) can hard freestyle it for 6mins plus
I know the Djinn line is a new line of frames they are rolling out for 2024 starting with the 2.5". I imagine they are planning other sizes but haven't heard anything official yet. A 4" would be pretty awesome.
Great Flying🎉nice to see the control on the sticks. Powerful Little ripper. Fly this quadmula with 4s and it makes a lot of fun, but 6s will be my next project
If I use tattu 6s 850 mah 150c is it good for punch and accelerate for this drone ? I am using 550 mah now
I personally think anything bigger that the 650mah packs are too much weight. The power to weight ratio really matters in terms of punch. I get the best performance out of this quad with the 380mah packs. I would much rather have that level of performance vs longer flight times. I freestyle so flying longer means nothing to me if I can't
move the quad the way I want.
Great breakdown and awesome ripping! Exactly what I was looking for brotha. Thank you!
Holy fuck Dude! You definitely are the best fpv FS pilot. No bullshit I'm not on some weird shit, your the shit bro! Finally some good music for what FPV is. An art form.😮
İts amazing setup bro thank you specially 3 blade props really different from 4 props. 4 props have prop wash and shake. 3 props have no prop wash or shake thats amazing and thank you for pid tunes
Yeah 4 blades are always like that in my experience, even on 5". It's great for when you just want to cruise for 7-8 minutes and get some nice footage with the larger 650mah pack.
Thanks for sharing... still love the Djinn
Serious skills that control
Still amazing. Thank you very much 💪
'siccc, Smashing Spain with that lil dude!
Yep.. gotta build one. Dude those rips are insane. 😮
This made up my mind…. Build the 6s version🔥
This quad is on my list next. If I would have seen it Friday when I ordered my f3 I would have just ordered this one also. 🤷♂️ nice Rippin Bro 🤙🏼
Are you still running same props as recommended in description? I'm having trouble finding the 4 blades anywhere
@keither19841 I primarily use these props because I fly it with the GNB 380mah 6s HV packs. Less flight time, but it just flies better, in my opinion.
www.racedayquads.com/products/gemfan-flash-2540-tri-blade-1-5mm-shaft-choose-your-color?currency=USD&variant=40530696175729&stkn=ed68f1cb6bdd&tw_source=google&tw_adid=&tw_campaign=18177138426&gad_source=1&gclid=CjwKCAjwm_SzBhAsEiwAXE2CvxrkYZGSw-nTOKEjeNju91my4GnvzMN5Na6QLqzJgPgrpnO-oVoGyRoC3ogQAvD_BwE
Do you think you can have them Google Drive files in tonight maybe?
STLs are back up. Putting the CLIs back up in about 15 mins.
@@MurdersFPV thank you
awesome
So cool! You are an ace pilot! ) Wow! // and + for music ;)
5:50 Saint charpu!!!!! ❤❤❤❤❤
Damnit! Now I have to build another drone.
Loving your channel. I'm binge watching LOL
Hah. I appreciate that. I have fun. 😁
Awesome stuff. One of my favorite in a while.
Sick review and flight brother!
Stunning little ripper. Thanks for the review mate
Great video and perfect frame for my next build. Order placed!
I need this so bad !
absolutely fire!!!
Great flying my man! I see my next build!
Nice video, flight and music! 🎉
Which antenna mount did you use for your tracer antenna on the back of the quad?
@@tecmission the one named 2.4
www.printables.com/model/280258-quadmula-siren-f5-series/files
Thanks for your quick response and greetings from Cologne/ Germany.
Love that, you've got serious skiils!
Any thing we can do about the camera with a little bit more protection and maybe have it sit back just a little far.
Amazing flight skills and a very nice build! I just got the same frame. Could you please tell me where I can find all of the TPU files for Djinn F25 to print?
@@KardoFPV the link to all their 3D prints
quadmula.com/pages/3d-print-file
@@MurdersFPV Thanks a lot!!
New to the hobby and loving your channel sir!
Welcome, bro and I appreciate that very much. 🙏
From the 5 frames I've build yet, the Quadmula (SF 3S) was the nicest to build with its labeled screw packs etc and the quality is top notch. BUT: they are just too heavy for small stuff and not being able to fit AIOs (25x25) makes them heavier again.
250g 2,5" should feel equivalent to a 1100g 5" looking at Rossers disk loading chart. As much as I like small drones, I think thats not the optimal way for most people (didn't try it though).
Yeah I don't know about charts. I just fly and do what feels fun.
Amazing flight dude
And drone performing grate 🔥🔥
Quadmula does it again!
Looking at building one my self. if I use the same build but with the dji controller 2 will the betaflight file you have done still work. Thanks for the great vids all the best
@adamdewsbery5384 yup, you'll just set up your control link for SBUS. There are great Presets in Betaflight for that.
Thanks for that and the quick reply @@MurdersFPV
Amazing flying skills 🎉
Awesome Nick, can you recommend a 3D print for mounts for a DJI O3 + Crossfire Immortal T
You can definitely do that if you can find one. Quadmula has a 3D print repository for their designs as well if you're trying to find something.
quadmula.com/pages/3d-print-file
Awesome flying!!
Which would you prefer better 2.5 or 3 inch quadmula?
Where did you put the capacitor for the tmotor f7 ??!! Did you just take it off ?
@andrewnelson3725 it's built just like this
ua-cam.com/video/k54V_UknaeQ/v-deo.htmlsi=jUGDcydqhwV8tKah
Awesome, thank you! Definitely answered my question about all the little things. Is the djin25 the same as F3 you built just shorter arms to keep props out of view? Can I put 3" arms on my 25?
@andrewnelson3725 You can not use the same arms, unfortunately. The bodies are similarish but not exactly the same.
I've just done a similar build myself after watching your video. It flys great! Thankyou.
I did notice your picture on Quadmula's website, are you affiliated with them at all?
@@ackers33 I am a sponsored pilot.
Just bought one using your affiliate link. Can’t wait! Shipping was a little steep though.
I Appreciate it! 🙏
Definitely let me know what you think or tag me in some flight footage or build updates.
Hey I have same setup esc and motors. Does it matter if I use 6s 850 mah 150C tattu battery ? İt would damage motors or esc ?
Nah it wouldn't damage it. That's a pretty heavy battery though so flight performance won't be great.
really impressive man.
jeeeez this guy can fly. holy mother
Hey man awesome video. Because of this I decided it's time to pull a trigger on my own drone and build my first one so I'm copying your build here. I bought batteries that I thought were the right ones but they are XT30 can I use that for the ESC? If I change the connection
Absolutely. It will work just fine.
Thanks for the great video, sharing your insights and knowledge!
Mind me asking what are the STL files for the Djinn? Mainly looking for the short O3 antenna and the short radio antenna holders. Sorry if I got confused! 😅
The Djinn specific STLs
www.printables.com/model/616992-quadmula-djinn-f25-series/files
The rx antenna holders for the F3/35 work for the Djinn
www.printables.com/model/314165-quadmula-siren-f3f35-series/files
Many many thanks 😊❤
Amazing gaps
do you think u could mount a whoop AIO on one of these with an adapter and still fit the air unit? i want one...
Not sure. I haven't tried but there is a decent amount of space.
I believe this will be my first affiliate link purchase
Hopefully they release the STLs like they did for the other frames?
I'm sure they will. I'll definitely ask for them to get on that.
The cli and stl folder are empty. Can be you help please
Sorry about that. My Google Drive has been acting dumb. I'll be able to put all the files back in there on Friday when I'm back from a work trip I am o.
Thank you please you can send them to my email too if you want
I was laterally on the Quadmula store about to get the f3 after thinking about it forever. Now that they have a 2.5 i might be getting this.
I honestly love the 2.5. It's an absolute sweet spot for a great sub250 micro imo.
@@MurdersFPV so you would recommend the 25 over the other 2? I am torn on building 2.5,3”,or 3.5”
@TW-pq3hn depends on what you want. For a great, compact, sub 250 ripper with max FOV, Djinn 2.5. For the best flying sub 250, SF3. If you just want a micro that rips hard and you don't really care about sub 250, SF3.5. You can build a 3.5 to be below 250g, but it impacts flight feel enough to not be as enjoyable, in my opinion.
@@MurdersFPV thank you so much for your advice!
@@MurdersFPV well I ordered the 3.5 but I can’t help the feeling that the 2.5 was the one for me.
Crushed it, great into, great review, Sick flight..
I really enjoy my Aos3.5 with o3...
I could see smaller being nice..
alright sign me up...
It's a great little ripper for sure. To me, 3.5" is about going as hard as possible lol. 😅
Like why not 2204 motors?!
Exactly! My aos 3.5 o3 on 1507 2700kv 6s rips harder than any of my 5" rigs, and those all run tmotor f80 pro's 1900kv on 6s... 3.5" can be insane if you build it right. But I'm really interested in building one of these 2.5's, just to guerilla freestyle something smaller with an o3.
amazing rip nice footage
how cool is that! is this quad sub 250 grams? surely not right
Yes
awesome vid thanks man. domyou prefer this now over the siren f3 03? keep going
This is my favorite micro right now, hands down.
Do you have a tune or file for download? Im copying your exact build(its to badass not to). Last oarts shoukd be in mid next week so no rush. Its my first full build and tuning/setting up still shows my green side. TIA
If you like the gemfan 2540 then you must try the geprc 2523 props. I guess they are made by gemfan. Awesome really.
When are they bringing out a 3.5" or 4" frame? Basically they just need to make longer arms
Definitely stay tuned. 😉
Why I buy geprc smart 35 4s ... bro :/ this is perfect 2.5 inch drone ❤
Looks so much flexible❤❤❤
Nice sick flying. I have recently built a djinn25.. with your tune and BLHeli configuration. Are the vibration at lower rpms normal on this quad? I don’t have eis nor rock steady
I don't get vibrations at low rpms
Looks cool, does it have cameras mounting ability for walksnail or hd zero? And where are those 3.5" and for the f3 lol
It can definitely mount Walksnail or HDzero. 3.5" would be pretty cool. 🤔😁
Awesome Video! I came across this when i was about to purchase the siren F3 split only to be out of stock! If you have a choice between only the 2.5 or 3.0, what would your pick be?
For Sub 250 purposes, I'm a fan of the Djinn. For just going balls to the wall with a micro and not caring about the weight, I prefer the SF35
Is this frame still available , I haven’t seen it on the site ?
@@Mape26 it sells out quickly
Wow.! What a beautiful little ripper.! Do they sell bnf's? I'm not in the mood or have the time to build a quad now. 😂
Unfortunately, no. But the amount of times people ask, I really want to push Quadmula to consider it.
@@MurdersFPV who knows maybe they are not equipped to build the drones, but I know they are limiting there market a ton.
I know you said you like the 6s build better, BUT mind sharing the specs for a 4s build?
any frame in view in 4:3 ultra-wide?
are there naked o3 mounting options?
I have tried all the camera fov options and the frame was not in view in any of them unless of course you're using a 50° camera tilt. You do need to push the camera as far forward as you can in the camera plates.
quite the ripper!!
Your tracer is crossfire right? Which elrs tracer do you recommend for this build? Sorry for the probably dumb question it's first quad I'm building myself.
What preset do I use if I were to use my cinelog25 and move it over to this frame?
Just ordered this! Canr wait gonna go 6s as well! Any new tips or tricks for this build?
@@Huntmx24 it's built very similar to thus.
ua-cam.com/video/k54V_UknaeQ/v-deo.htmlsi=rQMV45eSAn4egIbS
Have you tried this frame with 4s? Lots of people are telling me to go 4s on it. What is your opinion. Will it be good on 4s or is 6s gonna be a lot better? @@MurdersFPV
Nevermind I see you did talk about 4s in your video. Thanks
@@MurdersFPV I have pretty much the same build as you. I am on betaflight 4.4.2 am I able to load your tune where our betaflight version is different?
@@Huntmx24 if it's 4.4.x it should be fine