Turn Damaged Extension Cord Into Receptacle Station Complete Tutorial How To
Вставка
- Опубліковано 18 жов 2024
- This video shows you step-by-step how to take an old extension cord and make it useful again. With some parts that you can pick up at your local hardware store, you can create a job site receptacle station, or just something useful for camping and home life.
If you are using this outside, you need to plug it into a GFCI protected receptacle.
Thank you so much for watching! Please be sure to like, subscribe, and press the bell for notifications of all of our upcoming videos.
Parts:
Used 12-guage Extension Cord
Electrical outlet box (you need 2) RACO-4-in-Square-Deep Box-with-Raised-Ground
www.lowes.com/...
Electrical outlet box cover (you need 2) RACO 2-Gang Square Metal Electrical Box Cover
www.lowes.com/...
Electrical 1/2" Conduit / Chase Nipple (you need 4)
www.lowes.com/...
Electrical 1/2" Rigid Threaded Couplings (you need 2)
www.lowes.com/...
Electrical 1/2-in Die Cast Zinc Cord Grip Connector Conduit Fitting (you need 1)
www.lowes.com/...
Electrical Ground Screw (you need 1)
www.lowes.com/...
Commerical Grade Wire Nuts that accept 5 wires (you need 3) this is 100 pack...you can buy equivalent to this brand.
www.lowes.com/...
Commerical Grade 20 amp Receptacles (you need 4)
www.lowes.com/...
THHN black, white, and green colored 12 guage wire (stranded or solid)
*approximately 60 inches of each color needed. You would buy this and unwind the three strands from each other.
www.lowes.com/...
![How To Make The Best Extension Cord [Less than $20]](http://i.ytimg.com/vi/xcRtwk-W95U/mqdefault.jpg)
Great video everything is explained easily step by step. Thank you!
Thank you so much for watching the video and leaving such a nice comment.👍
I watched many videos on this topic and yours was the best. Thank you!
Great job...super easy to follow 👍
I had a like setup when I was an carpenter apprentice. I had it on a job and the customers safety officer made me get rid of it because of the knock outs. He said the knock outs made it unsafe. He told me that a solid box would be allowed. 😊
You sir definitely know what you're doing. I just watched a video of some dude making a "Super Heavy Duty" extension cord with mc cable, using a Romex connecter on the box (at least he used a red bushing) and then also buying a outlet cover like the ones you are using and then putting it upside-down on a 2 gang handy box. I never cringed so hard at a video ever before in my life. I wish there was a way to report a video for causing brain damage Lmao
I'd add a handle and/or a hook to hang it up somewhere too
Drop some of those mouse ears in the bottom of your tool bag,they come in handy as spacers to bring a sunken receptacle out flush with its plate…
Hey man, that's cool. In the 80s I used to build those, I bet I had to make at least half a dozen of those because people kept stealing them.
I've made several of these for job site use. Half the time the other trades would end up using it and I was stuck with using my generator😂.
Thanks! 🤘🏻
Nice detail instructions. What kind of plug does it have? Does it have the 20 amp or 15 amp plug?
@@hectorrey3308 Hi. Thank you for watching. I used 20 amp receptacles. At 13:40 on the video, I talk about the receptacles. I hope this information helps with your project.👍
@@YouCanDoIt2 I couldn’t see the male plug. Is it also 20 amp and does it have the T shape blade?
There are a bunch of these extension videos. This is about the best of them. None of the others have four outlets while still being compact. Also all the safety measures and good practices are in place here.
Hi John. Thank you so much for watching the video and leaving such a nice comment. Always appreciated 👍
Awesome. Ty for the great lesson. You just earned another sub.
I do have one question.
Does it matter if the plugs are oriented in different directions?
Hi Jose. Thank you so much for watching the video and leaving such a nice comment. That is a great question. It makes sense to have the receptacles in different directions to accommodate for larger plugs. You can easily do that without any issues. Thanks again 👍
You put outlets upside down
I hope that they can import this kind of materials in Philippines
Just purchased all of supplies listed, question could the two receptacles be grounded in the second box instead of running them to the first box?
Hi! Thank you for watching the video. As long as your ground wires are going to the grounding screw in the metal box and the pigtail wire from the ground screw is connected to the ground wire in the extension cord, you should be good! 👍
Thank you 👍🏼
Where is the gfi receptacle on the 1st outlet so the rest of the outlets are going protected, but great project.
Hi Bruce. I mentioned in my description that it needs to be plugged into a GFCI. I probably should have said it in the video as most people don't read descriptions. 😂. Thanks for watching and leaving a comment, always appreciated.👍
Wont you have issues with these on the job site ? Osha and all that.
Hi. That's a good question. You need to look into your area codes and work accordingly. What is allowable in one state might not be allowable in another state. Example: many generators that are sold across the U.S. are not allowed in California...but, all other states allow them. This receptable station is for indoor use on a jobsite. Where I am located, they are allowable. Thank you for watching👍
As a Superintendent for Commercial Construction for over 45 years I would advise people to only use this for personal use. If this was used on a professional construction site anywhere on the west coast you would be fined and the cord removed immediately. That being said I have done this in my earlier years as a Framer, from experience I will warn you to NOT use this cord in the rain, it's a shocking experience! LOL!
Folks be careful with the Lowes links here. They changed the knockouts on the 4x4 box at the link. Make sure you find the one that has 1/2 knockouts on the side. The one at the link no longer does.
Hi John. Thank you so much for watching the video and leaving a comment. I really appreciate the catch you made on the link for the 2-gang boxes. Lowe's must have changed the boxes out. I searched into the correct box, that reflects this video, and corrected the link to direct people to the correct 2-gang box. Thanks again!!
why did you not use jumpers beside sets of plugs instead of running all back to the extension cord??
Hi Lathern. You can do it either way. I chose to do it the way you see on the video to make all connections in the first box. Your suggestion works as well...either way gets the job done 👍
@@YouCanDoIt2 Unsafe and OSHA violation. Many have gotten a $1,000 Fine from OSHA for similar boxes. Once a cord is damaged you are only allowed to used listed device to repair the cord for job site use.
Unsafe and OSHA violation. This should only be used at home. Many have gotten a $1,000 Fine from OSHA for similar boxes. Once a cord is damaged you are only allowed to used listed device to repair the cord for job site use.
This is also very unsafe as built the box is not water resistant and MUST have GFCI protection either the circuit used, or one of the 4 duplex receipts must be GFCI, no matter if used indoors or outdoors. It is not uncommon to have water or other liquids spill or water issues from weather even if inside... or a tool short to ground...or accidentally cutting into existing water lines etc. ....this is a construction site after all.
In the USA, 9% of on the job Fatalities are from electrocution.
Another violation is with the wire nuts. They are only rated for 4 #12 wires not 5 (neutrals) or 6 (ground), this is a NEC violation. Most wire nut manufacturers recommend not pre-twisting the wires, if you install the wires correctly there is no need to pre-twist.