Have you ever seen any of these mistakes made in this video? Hopefully this was insightful. If you know of other common mistakes made, feel free to list them here. Never know when I may feature them in a future video! 😎
Is it acceptable to have one of the ground conductors (part of one of the NM cables) wrap around the box grounding screw and then get connected to the other ground conductors via a wire nut? instead of having a separate pigtail.
I always make at least these for mistakes on every box I wire, sometimes if I'm lucky I can get at least 7 or ate in one two gang box. That takes some practice for sure, although some can do it right out of the gate (beginners luck) I would have more pictures of my work but for some mysterious reason a lot of these houses aren't there anymore. Crazy times I almost forgot, my company name is RE-VOLTING ELECTRIC You'll be shocked by our work (it's that good)
My Dad was an electrician , and many times I would help him on jobs in the summer, and when it got to point where he could trust me to rough in a box ( they were ALL metal back when the dinosaurs roamed the earth!), Dad ALWAYS made sure I grounded the box with a crimped on copper terminal screwed to the box. Dad made sure it was done right! All these years later, I STILL remember that. Thanks Dad.
I've never seen anything BUT metal boxes in new work. Plastic is usually just rework in my experience, and only for convenience. If you're doing new work, the box gets screwed to a stud, so you might as well make it metal and strong.
Just saying … please teach your own kids what your Dad taught you. And if you don’t have kids… teach some other kid. We need the skills and quality workmanship of our ancestors to passed forward. Thank you 😊
@@drumstyx it all depends on the specific application and/or if it's Residential vs. Commercial/industrial "new" work... both types of boxes definitely have there places and pros/cons... Cost usually being the largest factor
I'm working on my daughters house these days. Lots of new wiring, switches, fixtures, and lots of correcting DANGEROUS previous wiring (house is about 40 years old). Your detailed and professional videos are greatly appreciated. Helps me sleep at night that she isn't living in a fire hazard. Thank you!
Dangerous, but somehow survived just fine for 40 years...kinda makes you wonder about the actual risk with that. Perhaps some of this is a bit overblown.
@@WaspLife It is absolutely true that things "survive just fine for 40 years". Usually that means no one ever pushed the wiring to its limit. Our electrical system is pretty reliable in that it can deliver the current we want even when things are not wired quite properly. For example, you can safely use a mis-wired outlet (swapped hot-neutral) for years because it was only every used to power a lamp. Then you add a clock radio, and it has terrible reception. You figure it's just because it was cheap. Then you decide that you want to charge your phone and your laptop from the same outlet. You plug in a power strip, and BAM.
That’s some great advice. In Bulgaria where I live, metal junction boxes are not that common in households. However, water heater switches are pretty often installed in metal boxes. Which can make it even more dangerous if the water becomes dangerous. Greatly explained, Sir.
As a man who grew up in a house where we just called a guy to do stuff I never had to fix or install anything. Now as a maintenance worker for only 2 years I've learned a lot and realized how much stuff we should've been doing on our own. I like the tips you have and find them helpful as I can apply them to my job. Thanks
Thanks for the info buddy. The grounding screw on a metal box I will be installing for my finished basement project could've been something I forgot. Now it's etched in my brain to not forget. Have a blessed day and work safe brother.
On new work, I install those pre-made ground pigtails in each metal box ahead-of-time (and "Z" them out of the way). It beats fighting through other wires to get to the back of the box with the screw.
you should have a check with your supplier to see if they have the box with the ground preinstalled in it. we use them exclusively at my work and they are a real time saver. The Reynolds Company does list them and sell them with the grounds pre-installed. a quick round of googling should get you to a listing to be able to order them.
Great video, thank you. One thing on the 12awg and 14awg combo. Wire sizing is sometimes upsized due to length of run to avoid voltage drops. Personally I'm running power to my garden ~150' away from the breaker box. I'm running... i forget, 10 or 12 for the main run, but intend to use one size down in the boxes or the branches. It can handle the amprage, just would cause a problematic voltage drop over the distance. Either way, still an excellent video and I've certainly learned some.
Just as long as the circuit is protected at the smallest gauge rating . If you downsize to 14 gauge you can only protect it at 15 amps no higher. 29 amps for 12
@@gerdberg4188 #12 copper is limited to 20 amps in most cases, even though the amperage table lists it at 30 it is limited below in the fine print notes. There are conditions in industrial and commercial installations that are engineered for the higher amperage but definitely not for a residential application....so a #12 can't be on an overcurrent protective device above 20 amps.
Simple, concise, common sense. I am a DIYer, but I've always preferred a mechanical connection(twisted wire) with a proper sized wire nut. Thank you for your simple good advice.
@@BlackVibeBallsack You cannot even correctly spell WAGO. wagos are under-rated in their spreadsheets and can actually reliably have much higher current pass through them then their rated current. i.e 20A / 300V.
Interesting to see the differences... Here in the Netherlands, you would typically see only plastics used in residential installations for boxes, conduits, sockets, switchgear and consumer units. Wagos are, of course, well loved over here too. Wire nuts, though still available, are a thing of the past. Those you cannot trust DIYers to get right and the pros have long gone the way of the Wago because of the time savings they offer.
Plastic and glassfiber is usually used here too whenever the devices are not exposed on top of a surface. Metal boxes and conduit are used and needed for exposed (on the top of the surface) installations, which you normally only see in commercial buildings. In homes, it would be possibly in a basement with concrete walls or in a garage with new work and wiring installed on top of the surface. In Europe we have special cable allowed for running on surface, but I remember a crazy scenario in Finland, where regular metal sheated wire was used and we had to add panzer tubing on top of all exposed wires that were run below 1.70m in closets, etc... (This was in a summer home, and the year was 1980). You definitely have quite a set of rules over there too :)
I just bought a "metal "housing" with no ground wire, unless ground is copper wire at back of housing, only black pos and white neutral wires. I never even thought of looking for plastic housing. My guy at Home Hardware selected metal housing. I don't think I had an option. David Innisfail, Ab. Canada
Thank you for these videos. The biggest takeaway for me was using the stripper to make the hook to go around the screw. I was using needle nose to do it, and it wasn’t always easy to get the curve right. Everything else will help, too!
The number one thing I've been encountering is the electrical box left uncovered. And, they didn't leave any screws in the box for the cover to be replaced. I wish you had mentioned that and the kind/size of the replacement cover plate screws. Great information all the way around. Thanks.
Thank you for separating "SHOCKED" from "ELECTRICUTED". It's so aggravating when someone says, "OW! I just got ELECTRICUTED!" To which I would reply, "Really? Then how are you telling me?" lol Great video, btw. Thanks!
I love your videos. I am an electrical engineer by education and know all of the concepts of residential wiring but have learned better terminology from you. I would call the major theme of this video that I am necromancing "strain relief" as that is what I was taught. Thanks for sharing such great knowledge.
Just for clarification, if the incoming line carrying the power is #14 (common in an existing home), it's fine to use #14 or #12 coming off the Wago. I could see someone misunderstanding what you said as all the wires need to be the same size when they need to be as big or bigger than the source wire.
If we're clarifying here, the limiting factor is the breaker, not the wire. 12 AWG has a 20 amp capacity 14 AWG has a 15 amp capacity So 14 AWG can be used in a circuit being fed by a 15 amp breaker. 12 AWG can be used in a circuit fed by a 20 amp breaker. 12 AWG can also be used in a circuit fed by only a 15 amp breaker but it's a waste of money as larger wire is more expensive.
@@hogroamer260 Sure, but lots of times you're going to find yourself with a roll of 12/2 that you're already using for the work and it's far more expensive to go buy some 14/2 than just use 8" of #12 of what you already have. This video was marked as DIY, so there isn't a truck or van with spools of wire to hit up. The breaker and the wire are both limiting factors. If someone else installed #14 on a 20A breaker, you've got an entirely different problem on your hands than the receptacle you're working.
@plsreleasethekraken @plsreleasethekraken Yes, I get using what's on hand as long as it meets the breaker capacity. No need to be snarky, not saying what you said is wrong, just trying to summarize and clarify that the breaker dictates. The design is dependent on the load, the breaker is chosen based on that. Then the wire size is chosen based on the breaker size (leaving out voltage drop situations). The breaker protects the wire, the wire is not a limiting factor. If someone used 14 AWG on a 20 amp circuit, that's a code violation and my comment is geared toward compliant work not every mess that a "DIY'er" can achieve. A DIY'er needs to know their limitations so they can seek out a professional. Just because there are UA-cam videos' doesn't mean everyone should tackle a job on their own. They may be putting their lives, and more importantly, the lives of others in jeopardy.
@@hogroamer260 sorry if that sounded snarky, it wasn't intended that way--just speaking practically. Yes, it would be a code violation; I was just speaking in terms of engineering/physics that the wire can be the limitation. An electrician can install a 20A breaker with #12, and then a previous owner could extend the circuit with #14. It's a code violation, but as the home owner I don't think you should care as much about that as understanding that wire is your limiting factor on that circuit because everywhere else on the circuit where the initial electrician wired with #12 would be fine. Again, mostly just trying to stick with the theme of the video where DIY opens up recep and finds this stuff. I do not think everyone should assume all the electrical done on their house was to code. It's never been that way anywhere I have lived. Appreciate the discussion.
i mean you could run jumper cable thick #6 wire from your breaker and go to #14 gauge in the box if you wanted to on a 15 amp circuit. not a great idea but code would be fine with it.
One thing I learned the hard way to do is to check those Romex clamps for casting burrs that can cut into the Romex; I had to replace 30 feet of Romex after that lesson, when I turned on the breaker and ...BOOM...the breaker tripped and the Romex was damaged right at the clamp, leaving it too short to use.
@@danielthommen8243 There was no room for a J-Box, without hiding it behind a wall (a code violation). The 30 feet of Romex didn't go to waste; most of it was used elsewhere.
@@dartrunner4599 1. He _literally_ showed he was using copper. 2. You cannot use aluminum or copper clad aluminum for a branch circuits of this size _at all_ .
@@zippitydoodah5693 Funny how people will debate you even when you present the code. I've been an electrician for about 30 years and I run across this or these guys that do these videos that give the wrong information. Dunning-Kruger effect rans rampant nowadays.
Well thank you you taught this old Souper tradesman a lot on this video. I own 8 tradesman certificate's the one trade I just don't play with is electrical. I would much rather get a certified electrician. But I am 100% thankful to you for teaching me how to inspect. Thank you .
I agree the things you pointed out are rather common code violations I run into as well. I must also add that there is no requirement in the National Electrical Code that the grounding screw must be green. The only bonding screw the code specifies to be green is a screw that is used for the main or system bonding jumper in panelboards and and other similar equipment. These green screws for the box type in the video are just a convenience product that works great for the application but is no requirement to use this specific product. Also the particular style of non metallic cable clamp you showed in the video is intended to be installed from the inside of the box. It is designed that way to take less space in the box. Most common places I use that one is in those shallow light and fan outlet boxes or maybe when fishing a cable into a box or cabinet that is flush in the wall and would be difficult to install a connector from the outside of the box.
The grounding hole is not always raised. It is sometimes one of "mounting " holes. It's usually a little smaller and threaded. Lots of fun on a box mounted to wood. You either have to hang it off the stud for clearance or make clearance before mounting. Those green screws do not drill into wood very well and it will seem tight but is not all the way tight against the wire. Always wiggle that ground once you think it is "tight" to be sure! The boxes with a bump are preferred because the clearance is built in, but you don't always get what you want at the store!
On older boxes that are re-used during renos that have no camel hump or threaded ground screw hole I use the pre-wired grounding clips that attach to the edge of the box. Faster and are code compliant.
The best way I've found to make clearance is to either keep an awl in your bag that has been ground down to just under the hole size and push it into the hole after the box is in place. While that hole you make is smaller than the ground screw, it will allow the screw to push itself in much easier. I also keep 6/8/10 tap in my pouch which can work for that as well using the first #6 tap as the awl. However be careful of breaking it as these are very hard and brittle.
Great video dude! I usually like to wrap one of thoes grounds directly to the ground screw before tieing them together so i can have extra space to make tails. There is little to no room for activities like to install a device in this box, which is why i typically will crimp sleeve my ground together instead of wire nutting. But if this is done its important to note you CAN NOT make jumpers with a crimp sleeve so wires can not be broken. Its kinda hard to explain this technique throught text. But non the less very educational
Excellent video. Concise and to the point. One thing to add is that the connection is everything. Not pre-twisting sometimes causes wires to pull into or push out of the wirenut. More on that point, wagos provide neither the contact area nor contact pressure for an adequate connection. I have personally found many examples where the heat produced by the inadequate contact of a wago have caused it to melt and catch fire. I even found one that burned through metal ballast cover. They should be illegal.
That makes me wonder if wagos are even rated for 15/20 amps? (Or just rated for some smaller appliance-level current draw like maybe 2-5 amps?) Yes, they seem silly, as a knife cut kind of connection is going to have a very small amount of contact. But: if we're being that technical, a soldered connection has a much lower resistance than even the tightest wound wire nut. 😆
using wirenuts should require a 6 month course on how to install them. they are terrible for newbies as they are so easy to screw up and hard to test. wagos are perfectly fine installed correctly for the application and are far easier to install correctly than a wirenut. also most manufacturer's on wirenuts nowadays specifically say not to pretwist so you take on liability as an installer if you do so. if there is ever a problem anywhere on the line and they are able to show you pretwisted against manufacturer recommendations your insurance will deny coverage.
You are right, these are common DIY mistakes, also I am with you, a good electrician twist the wires...it is just good workmanship. From the code book, sure, the pig tails to a receptacle should be the same size wire. I will point out that from an engineering point of view, #14 is rated for 12 amps in the tables, but we derate this because it can only do this in short lengths and would result in over heating in all but the shortest runs. We do the same with #12 which can carry 30 amps in short lengths. (look at the tables in the code book and you will notice the footnote about derating both) For that reason, while I would never use a smaller wire, #14 in pigtail length would have no problem with carrying the load and would probably not even get warm. Another good point about the green ground screw for the DIY guy, mounting screws are not allowed for grounding, ever.....but I would rather see it grounded to a mounting screw than not at all!
Yeah, hence difference tables for "chassis wiring" and "power transmission" that you often see in tables, smaller lengths are fine. That said, if I'm running NM wire, I'm using the same gauge if anything due to convenience of snipping off a piece of the roll I'm using for the hot, neutral and ground pig tails I'm all making.
14 is not rated for 12 amps , rather it is not allowed to be loaded to more than 12 amps . It actually has higher ratings in the tables for deration purposes
I'm better than good, and I don't pre twist my wires, pretty sure I've not ever had a connection fail. Wire nuts are a tension device squeezing and digging into the wires. If we consider the surface area making contact it's not hard to why twisting is counterproductive, especially when the manufacturer of the wire nuts says to not do it. I believe it may be leftover from the days of ceramic nuts, in that case it's most likely better, or even necessary
Excellent video. This is how how-to videos should be made. Clear and concise instruction, excellent camera angle(s), and well explained throughout. Thanks!
This channel will come in very handy as I have 17' of kitchen/dining room wall that has to be rebuilt and there's a breaker box on the outside opposite the corner upper cabinet. The Romex cabling is most likely going through a schedule 40 or 80 conduit through the top plate and the individual cables then routed through the attic to the individual rooms for the lights and outlets. I can do the framing as the present wall is suffering from extensive termite damage. However, the box will have to be removed, and all cabling disconnected, pulled back through the top plate and the conduit installed in the new top plate and cabling run through to the breaker box. Of course, sections of the ceiling sheetrock will have to be removed to have room to work and all wall sheetrock and insulation removed and replaced as well. The consequence here is while the power is disconnected, I will be doing the repairs relying on a generator and battery powered equipment. All cabling and breakers must be labeled for proper reinstallation. May be 1-2 years before I pull the trigger on this project. All the termites gone, and the wall is temporarily supported for now. Won't know the extent of damage until all sheetrock and insulation is removed, also plumbing and natural gas lines present. Be doing a lot of framing, plumbing, and electrical code studying in the meantime.
No fluff, easy to understand, great flow of information (no pauses, ums or uhs), AND you know the right names for the parts you are demonstrating! Great job, man! I'm now a subscriber!
I have found over the years that when using the two screw connector can cause a dead short or a high resistance short if the screws are tightened too tight. Unfortunately they may not be found until after the rough-in is complete and power is applied. A high resistance short when coupled to a GFI circuit can be a bear to find. This goes for any metallic connector. The 2 screw connectors must be tightened very carefully and until the cable does not slip on a tug test. Over torquing can be almost impossible to find once the drywall is in place!!
Another thing I would point out is to just snug the clamp down on the metal NM connector. Over tightening the clamp can damage the cable causing a short circuit. I do agree they are the best connector and use them myself, just don’t over tighten them. I’ve been a journeyman electrician for 38 years.
@@gerdberg4188ecause as the video explains, the screw clamps hold more securely. I would only use plastic on data or maybe thermostat cables. Moving wires can work loose. Also, there are clamps that are usable from inside the box, though a bit tricky to work. One more thing--someone proffered that "How To Home" used the plastic device backwards. I disagree.
@@irish89055 those would be called pigtails that are meant to be connected to the receptacle, light or other device that the box is there to serve. If the box were just used as a junction point, those pigtails wouldn’t be necessary and wouldn’t be there.
Thank you for your video. I have been doing some electrical work at home and rewiring our garage with new breaker box and all. I didn't realize grounding the box would prevent electric shock and other problems. I'm going to fix mine first thing in the morning. Thank you for the advice.
I appreciate what you’re saying about the #14 used as a pigtail when the circuit is, apparently, 20-amp. However, I had this very discussion with the authority having jurisdiction (the inspector) when he tried to ding me for it. If installing multiple devices on a 20-amp circuit the NEC allows that those devices be rated at 15-amps. Using that logic I argued successfully that my pigtails could be #14. This same inspector once had a conniption when one of our guys didn’t use the code required green grounding screw to bond a metal enclosure. I asked him what the most important part of all this was and he said, “Grounding, of course!” I asked if it was and he said it was but the screw wasn’t green. A 10-32 screw is a 10-32 screw. I’d rather see it grounded with the “wrong” screw than not “because you didn’t want to break that rule.” In our trade there is nothing more important than grounding. Thank you for doing this video!
as an Electrician apprentice I have to shoot you major respect. I caught 2/3 and didn't catch the 12 gauge wire. Thank you for making some of us be better at our craft and home owners safer. At first glance, even my mentor didn't spot that gauge difference first. Although at second look, he did spot it... I didn't. Again...thank you. Much respect to trade and major respect to you.
I'm curious, there's no mention of the breaker size on this circuit. Just because it's 12 ga doesn't necessarily mean it's a 20 A circuit. It could be a really long run on a 15 A breaker, or the installer might have been out of 14 ga to finish the job. I don't see anything wrong offhand with using a 14 ga pigtail even though it's 12 ga coming in. Am I mistaken?
@@crisdunbar4753 I am still learning, but I would locate/isolate that circuit and factor in the amps it was intended for. If it's lights, fire away on that 14ga. If it's plugs... eliminate all 14ga because you never know when someone is going to plug in a TV, Playstation and 1600 watt electric space heater. I'm curios to see his answer too. (I've only been an apprentice electrician for 3 months... on the job training - no schooling)
@@ericallen7200 I guess that's my point. The video claims without qualification that the 14 ga pigtail is a mistake. This may also be a jurisdictional thing. Where I am (BC, Canada), 15 A general-purpose (mixed outlets and lighting) are the norm, with 14 ga cabling. But of course, using a 12 ga cable is perfectly acceptable (if uncommon) on a 15 A circuit. So I don't see the 14 ga pigtail as an automatic error. The _intention_ of the circuit is beside the point I would say. If it's a 15 A breaker, the 14 ga pigtail is fine; if it's a 20 A breaker, it isn't, regardless of what is used for. Note, I'm not even an apprentice, just a fairly well-educated amateur. =)
@@crisdunbar4753 code wise you have an issue still but reality wise i don't think it's a problem having the 14awg on a 20A circuit there as it is less than a foot and nothing returns to the main circuit there. 14awg will stand up to 20A at that length just fine. still not best practice and probably a code violation though not sure as i do know whire length plays a part in the code for amperage.
@@crisdunbar4753 we have anumber of 15a circuits here ran with 12awg wire. codewise it is fine to step down to 14awg there but it is a bad idea. the next idiot working in the circuit will see 12awg out of the breaker and assume he can slap a 20a breaker on there. not that i think it would actually be a problem as long as you aren't feeding out of the outlet 14awg that short should handle 20A without an issue but code will come down on you for it
FINALLY! A UA-cam video that actually cuts to the chase pretty quickly, and gives you good, concise, quick (and hopefully complete) information. Well done!
I ran into two of the issues you are illustrating. First, the metal octagon box I encountered and got shocked from didn’t have the bonding screw connecting the ground wire to the box. Second, it did have a metal romex connector installed but the wire was in at a steep angle and the installer tightened the clamp too tight, cutting into the hot wire and electrifying the box! I wasn’t working on that circuit but just bumped my elbow into it with a surprise! So lesson is, when using the metal wire clamps make sure to run the wire straight into the center and don’t over tighten!
Really good, stuff. If I might add, the three neutrals marretted together, should be twisted a few more times so the “twist” is confirmed-viewable from below the barrel of the marrette
I've followed you for a while, and honestly, you have busted me on a few issues; I'm so glad you have. If I'm going to do the job, I want it done right. Thank you very much for the great videos.
Loved the video!! Gave me some good reminders on what to look for. I was concerned in that I'm updating some of light switches and plan on using the Wagos. On your image for your video there are words "DONT USE" and pointing at the Wago. Now I see it was about the smaller wire.
WAGO's are a personal choice. If you do the strain relief on the Romex sheath and the wires going into the wago is not stressed and can not pull out they are fine. When I am rebuilding 1930's floor lamps I replace the old wire nuts with Wago's, a 5 way for all neutrals, a 2 way for the switched hot single lower bulbs and a 3 way for the switched hots for the other two. Getting five 12 gauge stranded wires into a wire nut is hard but a Wago fixes that.
There is actually a torque spec from the mnfct for all those screws/bolts/lugs. Nobody pays any attention to it but a torque screwdriver is a good thing to have in your bag.
Yes, the metal box should be grounded but grounding the box doesn't protect you from getting shocked. What really happens is if the box becomes energized and the box is grounded, then the breaker should trip because it causes a short. If you touch the box before the breaker trips, you will be shocked. Remember, grounding doesn't protect people from getting shocked, it just allows OCPD to operate properly.
Even if you do get shocked, you won't be the sole path to ground, and if you have the proper shoes, a 120V receptacle won't send enough amperage through the heart to kill you.
@@JayJay-gl2df Still, grounding is meant to protect wires from shorting and causing fires. It's not meant to protect people from being shocked. Regarding the box behind the sheet rock, the metal screw(s) on a typical plastic cover plate is grounded to the receptacle or the switch device which is grounded to the box, so technically you just would need to touch that screw.
@@JayJay-gl2df The Breaker won't always trip, and OCPD only works if there's an overcurrent. If the box is active with 8-50 ohms. Amperage could get up to 14A without tripping. With a proper ground, it would spike to 40-60A and instantly trip the breaker. GFCI rated equipment would catch this, but are 3x more expensive. There's also less than a 1/1million chance that a breaker is defective and remains open.
@@Krab17 two things though not that I would use a metal box but if there is a metal box make sure it's earthed so if the active does break off it will trip the breaker and replace the breaker with a Earth leakage circuit breaker I don't know in your country if they have them but in Australia you just swap out the old circuit breaker and put in a combination circuit breaker combined Earth leakage breaker One Piece unit it takes the place of the old circuit breaker
Metal boxes are pretty rare in the US for recent residential construction. I see them when used with conduit, when mounted on masonry basement walls, or on old installations.
I wanted to leave a comment and thank you for making such a really good video!! The videos that you have posted so much better than all the other ones I've seen. You take your time and actually explain everything step by step. A lot of videos I've seen they will explain how things go but seems like most of the important parts that you need to know and is the reason you are looking up the videos they don't demonstrate how it is done they get to that step of the process and pretty much skip over it and it's already finished so you keep backing up the video and pausing it at spots so you can kind of figure out yourself how they did it and like I said that's the reason we are watching the videos in the first place lol. I do electrical wiring to make military and medical devices which it is important that they are made correctly u don't want them to fail or malfunction when they are needed. I'm in charge of training the new hires and most of them will come over to me afterwards and thank me for being patient and taking my time while explaining each step and if they don't fully understand at 1st and watch what they are doing to help figure out an correct what and why they are having trouble. I now understand what they meant because that's exactly how I felt when watching ur videos!! Because some of the people that make videos I don't know why they bother they remind me of the guy that trained me and when I asked a question because I was confused he would tell me to look at the paperwork it should tell me but obviously I didn't understand that's why I was asking him LOL and there's no sense teaching somebody if not going to teach them right. sorry for such a long comment but thought it was important to give thanks and let you know that there are people out there that do appreciate you taking the time and making these videos to help people. How much do you know about fixing cars 😆
Whew! I have been doing it right all these years. This is a great go to video to show friends that want to try their own. The mistakes I found in my home after I bought it were a bit unsafe. Just subbed.
Great video. However as you stated that you have to use a green ground screw. I agree with you on that but code says that you can use a screw that is machine type and color truly doesn't matter. Now for me I am like you, I use green because I have thousands. Your videos are very helpful and I always appreciate a great tradesm. Keep up the good work.
I agree, there is no code for color and they need to be machine screws. I just stated what I did about the screws as you know they are going to work and they are so easy to find for folks in the electrical section. Wouldn’t want someone just using a deck screw. Thanks a lot for the feedback! I have enjoyed and learned a few things from your videos as well.
Wire size changes in a circuit happen all the time. As long as the wire ampacity exceeds the breaker there’s no issue with having different gauges of wire in a Wago. In fact one of the massive benefits of Wagos over other other wire nut alternatives is how easy it is to adapt from say 12ga to 16ga. Of course when installing a new breaker and running a new circuit you should just select the appropriate wire gauge. But oftentimes wiring is oversized for the breaker, and the equipment you’re tying in has smaller wiring than the circuit.
I seen wagos fail in high hat lighting where the lamp heat combined with attic humidity caused corrosion. Not a fan as the actual size of the surface contact is less than a regular wire nut.
the bare wires are touching each other, and the wire nut screw ring cuts into and surrounds the outer copper surface of the wires. Then copper wire corrosion less of an issue than the metal surface of a wago ? A lot more force bears down onto the bare copper using a wire nut.@@sparksmcgee6641
The connectors you're referring to are not meant for stain relief it is meant to protect the wire from shorting on the metal box. Propper stappling of the wire before entering the box is wear you get the strain relief from. Also, the tap rule does allow for different wire gauges' to be used. A common Method to avoid voltage drop is to run #10 wire throughout and then switch to #12 at the device location.
Sir, I agree with almost everything you've said, but there is one thing I must bring up. Wire gauge is in fact dependent on length. While code may or may not require a 12g pigtail, it is completely safe and adequate. Consider these two examples; while a 20 amp circuit may require 12 gauge wire, it may require a heavier gauge if the run is excessive in length. On the other side of that, consider a window mounted air conditioner requiring a 20 amp circuit on 12 gauge wire that comes with a 12 foot long 16 gauge cord. Incidentally, I just installed such an air conditioner in my shop storage room/office. I know it may not meet my jurisdiction's code, but I extended my 20 amp, 12 gauge run closer to my a/c by five feet with 14 gauge wire. I also shortened the 16 gauge cord by ten feet. So I've actually increased the current capacity even though I used a smaller wire to feed my receptacle. Sometimes code does not mean better. Having said all that, I still learn from you. Thank you.
@@hogroamer260 Because it would have required a trip to town and for the purchase of another roll of 12 gauge. The only reason for this would have been the to appease a code which is completely irrelevant in my rural personal shop. I am much more concerned with safety than I am with meeting code.
It’s been a while since I’ve opened a code book, but the multiple gauges on one Wago seems like it would be fine IF the cable run is long enough to have to account for voltage drop. As long as it’s a 15-amp receptacle on a 15-amp breaker, I believe this would be code-compliant. The Wago would have to be listed for both wire sizes too.
Yes, I'd say that if you're going to pigtail that to a light, going to 14 gauge would be fine. If doing an outlet, I would never drop the gauge of wire down.
14ga cu wire is good for 15a circuit. It's stupid to run 12ga all of the way to the box, then pigtail with 14ga, but if the chicory is on a15a breaker/ fuse, it will not cause a fire. The breaker will trip before the circuit gets overloaded. It is a waste of more expensive material to run the home run in 12/2wg, then use 14ga for a pigtail that would require a15a breaker vs a20a
@@bilmoe5856 Not true at all! First and foremost once behind the meter you pay for the losses. The bigger issue is voltage drop. In a larger house, you definitely run 12 up to the first junction, then 14 from there just to reduce inductance and resistance and still use a 15amp breaker. In some areas, it is even code that you are actually required to do this beyond about 50-75ft (most places closer to 100ft).
Small correction: You do not NEED to use a ground screw to ground the box. Article 250.8 A) lists permitted methods for grounding and bonding, #5 is "machine screw-type fasteners that engage not less than two threads or are secured with a nut". So any 10-32, 8-32, 6-32 etc. type screw can be used as long as it engages at least two threads or is secured by a nut. Note you cannot use regular wood or sheet rock screws. With that being said those ground screws are a great option because the wide head makes it easy to grip the wire, but if you don't have them handy, a regular machine screw will satisfy code requirements.
I think the intention of the NEC code is to ensure a coarse threaded screw ( i.e. wood screw or sheetrock screw) is not used for this purpose. A machine screw thread, has a much tighter thread, and is less likely to come loose from its metallic seat.
A lot of people think that screw has to be green and it does not. the only screw that has to be green is when you are bonding a service neutral to the ground in a panel or first means of disconnect.
Although you are technically correct. It's bad trade practice. I know of inspectors who would fail just because a proper ground screw was not used. However that was Canada, where bad trade practice or sloppy work is written into the CEC as failable. Not sure about the NEC. In Canada the same thing applies to not pretwisting your conductors for marrettes/wirenuts. It's bad trade practice and failable.
Thanks for the content. Good stuff. Suggestion for future content: an electrician is coming tomorrow for a kitchen remodel ... consult. (They will do the work another day.) What are things I can consider and do to GET THE MOST OUT OF AN ELECTRICIAN - quality work, productivity, and EXPERTISE included? Sure, there is no-brainer stuff like clearing a path to the panel, but I was surprised to hear from an expert to NOT clean the area too much as it might hide clues when troubleshooting problems. Should I have a laundry list of other items that could be picked up, or should I limit the "extras" to just one or two? What do you encounter that customers could do to make your job easier? What have customers done for you that really made your day? Do you accept tips? How often are you tipped? Is it better to tip before the work, or after? What am I missing?
These are the questions I would love if more customers asked. Here are the answers: * Hire a licensed electrical contractor. * DO clear any personal items in the area where he/she will be working. * DON'T try and work on it first or take off cover plates or anything. * If the electrician is there hourly, feel free to ask if he/she would mind looking at a couple things. If they're there on a a specific task they were contracted for, that would be a separate deal that would need to be worked out. * To make our jobs easier, have your car moved so we can park as close to the work as possible as we make many trips back and forth to the truck. Lock your dogs up outside the work area and try to keep them from barking all day. Same goes for you'd kids🙂. * Offer them a cold drink. * Yes, we graciously accept tips which I get every once in a while. Make tipping the last thing you do as they're leaving. * Don't try and help. If a customer watches me work I'm not bothered but I would prefer otherwise. SOURCE: I'm an electrician. Hope this helps!
Strain relief saved my home from burning down. I had a licensed plumber replace my hot water heater. My home has aluminum wire, but even many copper wired homed still use aluminum wire for large 240V circuits. My old water heater had an old school pool timer on the wall the AL wire came to two terminals and whip to my old water heater went to the other set. The contractor removed that timer and wire nutted the new water heater whip to the AL wire directly with couple of yellow wire nuts. I cam home found a burn mark on my wall. When I removed the plate off the wall entire box was burned up the aluminum wire burned like a fuse back to the strain relief where it actually got enough current to flow to trip the breaker. The strain relief forced the wires together tightly when the insulation burned off it tripped the breaker. If it had gotten back up into the attic likely would have caused a fire. The fact that have two wires touching they liquefy. It's lot like an arc welder.
The third most common beginner mistake is to not do a box fill calculation to be sure the box volume is large enough to accommodate the wires, etc. This can be a big problem when adding something on to a preexisting box like a GFCI or more wires to retrofit a new branch for another plug down the line.
Lrnd tht a long time ago. Always use a deep box for gfci,dimmers,Decora it's not much more money and you will save on the labor or work harder to save money up front but I lrned a longwhile time is money and so is energy lol
Its more the hard to bend copper that is the issue when trying to get a gfci outlet in there. Yes the gfci is a lot deeper but trying to get those 14 gauge wires to bend and push back into that tiny box is a task in itself. Maybe super flexible romex 🤷🏽♂️
So now I have to learn what a "box fill calculation" is!!! When do I stop being a beginner and enter the intermediate stage of DIY'ing? I mean, I've stabbed myself with sharp wires at least 50 times and got tickled by the zappy electrons twice!
Y a that’s right some wants a gfi …..old metal box …….three pairs no ground …..gfi won¡t fit ……. I am sorry it is only going to cost you 500 dollars to change this outlet !!!!!!
As I can see, In Canada, we have better boxes. The box comes with the larger ground screw and there is a recess on each side of the screw which keeps the wire from going out. Even with your green screw and the fact that you correctly looped the wire around the screw, the wire tends to go out of the screw on the left side. We also have theses green screws but usually, they have something to retain the wire in the receptacle to retain the wire. Nice video and well explained.
Yep, the boxes here pretty much always come with the ground screw. I think the green screw might be more of an American thing though as the screw that comes on boxes here are usually a silver colored pan head with a much wider head that helps lock the wire in place better. We do have some receptacles and light switches here that come with a green ground wire screw, but I'd imagine that those are built to American electrical standards, but have also gained CSA approval.
@@billymacktexasdetective5827 Careful casting stones there bro. The country South of Canada has no freedom other than the freedom to make poor choices and that is the last I'll say about that (off topic). The fact a plastic box even HAS a ground screw in it is to make it brain dead easy to locate the ground cluster by following the wire attached TO that screw. Personally, I just wish all these boxes were deeper than they are so I don't have to stuff the wires in like the worst game of Tetris ever invented when installing dimmers and timers.
@stevedixon921 Easy there. That country that apparently makes those poor choices is the ONLY reason Canada has not been invaded and claimed by whomever really. So let's not get carried away!
When grounding a metal box, I like to make a loop with the ground wire and crimp it with a collar, so it’s like a noose that goes around the ground screw for a more secure connection. Then, I use the remaining length of the ground wire to twist and crimp it with the other ground wires in the box. It gives an extra layer of security and ensures that the grounding connection stays solid even if anything shifts or loosens over time.
I'll just throw this out there as a general tip for anyone working on older houses like mine. Always treat the box, receptacle, whatever you're working on as if it is live. Even if you just flipped the breaker and tested the circuit. I'm remodeling my kitchen, in a house that was built in 1920. Wiring is sketchy to say the least, but everything I've found so far in the wall I'm working on is modern Romex so I wasn't too worried. Yeah, well I shut off power to a circuit I was going to modify and add some receptacles to. I plugged a tester into the outlet I was about to take apart, it did nothing. Once I took the cover off and pulled the receptacle out a bit I tested the circuit with a multi-meter. No juice detected. So I started disconnecting things. I had already pulled the hot wires off and was working on the neutral wires. As soon as I got one of them a bit loose and was wiggling it to pull it away from the screw I got a bit of arcing. I was wearing mechanics gloves with a rubberized coating, and using tools with plastic handles, so I didn't feel anything. My theory now is some other circuit nearby must be stealing neutral from the one I was working on. Pretty common in old houses. At that point I told my wife to light some candles and shut the main power off to finish the work. So yeah, just like with guns, always assume it's "loaded". There are videos out there on how to safely work on live circuits. You shouldn't do it on purpose, but using the techniques every time you touch a circuit is a good plan anyway.
Even newish house. Mine was built in 1999. Flipped breaker to living room tested an outlet and confirmed no power. Oh but the corner outlet near the hallway was live. Ouch…
And...know who you're working with. While I'm adding ceiling lights and juice for an electric oven the homeowner was in the back of the house working on the bathroom wiring which I had no idea he was doing. When I throw in the breakers and walk back into the kitchen I hear his wife screaming about a fire and I could smell overheated wires. I thought I had made mistakes but his wife made him tell me the truth. He undid his work and my work tested perfect. He tried to lie about it but I had separated, metered and marked all wires in a 3-unit box when I started and when I hurriedly saved the breakers and began metering those wires again they were different than before. I showed him and his wife made him admit what he'd done. Without her I would have been there for days.
Great Job, just wanted to let you know I think you have one of the best approaches and by far the most useful, easy to understand formats of any educational videos on UA-cam. The videos are accurate and explain the necessary information and steps needed to complete the process and installation of the particular project being worked on. The instructions given are simple and easy to follow and there are no unnecessary procedures or tangents to distract or overcomplicate the lesson. You give some different options including the preferred method you like to use for the situation. Most importantly, you make sure the message, "Of what not to do! or this is dangerous BECAUSE!" is pointed out without being overbearing or sounding ridiculous. I think you explain yourself well, giving you credibility for your knowledge of the trade. I typically don't like watching UA-cam videos for many different reasons; the lack of hosts' intelligence and no confidence in the material being discussed. Primarily my main objection is when the teacher of the video tries to be a comedian or brings their personal life into the show. You understand the importance of the lesson and respect the viewer's time. I would like to ask you if you could do a segment on " How To" #1. Wire 3 and 4-way switches power to light/ power to switch, receptacle in the middle. #2 where to start when wiring a lighting circuit and how many rooms and LED fixtures can a 20 amp breaker carry( I know most lighting circuits are 15 amp) #3 a bedroom receptacle circuit. All circuits starting from the panel, like new construction.
Well I am really glad to hear you are finding value in the content! Thanks a lot for sharing all of that with me. Those are all good subjects! I will see if I can get some of it into one of the videos! Thanks a lot for the ideas and again for the well thought out feedback!
I liked your video. One thing that always concerned me as a electrical inspector was when I see wire that had been stripped with a razor knife. A lot of times as this is done fast, the blade cuts through the conductor jacket as well as the outer jacket. Best to use your t 5s or strippers to barely score outer jacket to allow a clean break without touching inner insulated wires. On uf wire, all I needed was my linemans pliers only.
WAGO as a German company has a lot of accessories you won’t find elsewhere. Spelsberg ABOX SL 2.5/4 has plastic “sockets” where you can push the WAGO’s in once they’re connected, which makes everything look nice and prevents the levers to be opened. Google for an image - it’s brilliant and an incredible time saver.
@@PongoXBongo I can only see the VDE certs for these boxes on their website. Other components are listed also with IEC and UL Type Ratings, which would be sufficient for the US. So I guess the answer is either „No“ or „Not yet“. (But they‘re really cool nonetheless!)
I'd be much more concerned with the connectorless wire insulation being cut by the rough edge of the box than the wiring being pulled loose. But, I also put a romex staple within 12" of the box.
Good point. I had a neutral wire get frayed from the box when installing it Didn't realize it until I flipped the breaker on. The breaker immediately tripped and once I investigated and found the problem, I realized how lucky I was I didn't burn the house down. If I hadn't been there and it hadn't tripped, it could have been bad news. Do be careful when pushing the wires back in the box.
Classic goodness I learned in high school ‘Basic Electricity’ and slowly forgot as plastic boxes became the norm. Thank you for setting us straight and reminding of details when using metal boxes.
I started using Wagos quite a bit recently. They're very convenient, but I've discovered that the levers can pop open very easily when you're pushing everything back in the box. Bad design flaw. I'm tempted to start taping them shut, but then why not just go back to wire nuts? So be sure to visually inspect your Wagos before you button things up.
the visual inspection combined with the test point for leads is good enough reason to switch from wirenuts. not to mention the ease for connections between solid and stranded wire. that is far far to easy to screw up with a wirenut especially for DIYers
The best way to ground that 4-square box (or any metal box) is to take the ground wire from the "hot" into the box, wrap it around the ground screw (but don't cut it.) It comes into the box, around the ground screw and continues to the wire nut UNCUT. That way the ground wire is not cut before it is connected to the box and if/when the wire nut is removed, your box is still grounded. If your inspector likes to see a ground clip without removing the cover, ground box as described above. Then pigtail the ground, using the pigtail for the ground clip.
The min. allowed dimension of the wire depends on the circuit breaker and the loop impedance. If you use a 10A or smaller circuit breaker there can still be different wire-types mixed together because of the voltage drop (here we often have 4mm² until the last box and then 2,5mm³ to sockets (16A breaker) or 1,5mm² to lamps (13A breaker), all depending on your loop impendance). You always have to know the max. current on that circuit and note the diameter in the distribution plan. And measure the loop impedance at the very end.
In North American standards, it would be ok to mix 12 and 14 AWG on a 15 amp circuit as that only requires 14 AWG, but not on a 20 amp circuit as that requires 12 AWG. That said, a pigtail like this is unlikely to burn down or melt anything either way, as with such a short wire, there's very little resistance to generate a lot of heat. Also, it's in a metal box, so there shouldn't be anything to catch fire even if it does get hot. Still, follow the code, it exists for a reason.
Pretty sure you're allowed to run 12 gauge wire off a 15A breaker if you want/need in which case the 14 gauge wire would be fine. That being said if it was off a 20A breaker I'd generally avoid it but I would have to review the appropriate electrical code to see if there are any special cases that would allow 14 gauge wire to be used for 20A which may apply.
You can run #12 on a 15 amp. However, should never run different sized wires on a circuit. The next person may assume the circuit is capable of a 20 amp circuit breaker. Every situation is different.
@@HowToHomeDIY if the next person assumes , then they did not do their home work . Yes you can protect 12 gauge at 15 amps . Maybe you have a 450 foot run to an out building with a piece of equipment . It could very well require 10 gauge wire to support a 15 amp circuit . You cannot protect 14 gauge any higher than 15 amps in any case no exceptions . Well except motors of course .
You say 12 vs 14 doesn’t make sense but it does make sense. The hot could continue onto another box for another load, so it might need 12awg to handle multiple loads, but the pigtail for your one load here could very well do fine with 14awg
Additionally, all the wires coming into the box should extend a minimum of 6-in from the final finished surface (box edge if surface mounted or plaster ring if recessed) once spliced together which may mean leaving up to 9-10 inches of stripped wire in the box for each conductor. The pigtails don't count as this length. This is the biggest mistake DIY-ers make with ANY kind of electrical box.
NEC 300.14 => 6" of free conductor from the point where it emerges from the sheath, and if the box is smaller than 8" on a side (like you can't get you hand in the box because its just a two gang box), then 3" of the total must extend beyond the opening. Most nail on plastic boxes are less than 3" deep. Working with wires that come out just 3" from the box totally sucks. But that is minimum code. My habit is to have 9" total length of free conductor. Easier to work with.
Not just DIY’ers. I’ve seen plenty electricians cut the wires too short. I always cut the wires to the length of my lineman’s when cutting in. That way you have plenty extra when you go to trim out. Nothing worse that having to do service work on devices that have about 3 inches of wire past the box.
That's a myth that needs busting, its not from the box edge, its from where it comes into the box. Too long can be just as much of a pain or more than too short, especially with larger gauge wires on bigger receptacles, you're not even close to approaching box fill from a yoke and wires standpoint, but its obviously ridiculously too crowded when you try to shut it up.
@@snap-off5383 It's my "opinion" that it should which is why I wrote "should" rather than "shall." By code, conductors shall extend at least 3-in from any box with an opening less than 8-in in any dimension. So if you're installing a deep metal wall case (4-in) you need at least 7-1/2-in of stripped wire to meet code minimum (taking minimum bending radius into account). Strip the wires ~3/4-in to terminate to a device, and you're attaching that device about two inches away from the front of the box. Fun. But go ahead, let's tell the DIY-ers that it's okay to do that crap. Who cares about professional best practices anyway? Right?
There was a short period of time in the 1950's where grounded wiring was used but not grounded outlets. The ground wires were connected to the boxes only. My house was done this way so I went around to every outlet with a grounded box, replaced the receptacles with three prong, and used pigtails to connect them to the grounded boxes.
That time period varied. My mother's house - built in 1962 - had ground wires running to the boxes only. That made it easy to change to grounded outlets. The boxes are small, and GFCI outlets would not fit until Eaton offered their smaller ones. Another thing I had not seen before: No wire nuts in the original wiring. Instead, wires had been stripped, twisted, and a sleeve crimped around them, then a wrap with rubber tape. That took a LOT of labor.
I think that the grounded boxes of some years ago, even conduit that ran between boxes used an outlet that self grounded through the mounting ears to the metal box. When changing outlets in these older boxes make sure you don't grab a handful of the 49 cent vriety. Most of those do not self ground to an older system. That cheap shit should be outlawed, 49 cents against a correct outlet which will save your house or life.
What I would see a lot of people do to fix the ground would be to take advantage of the length of ground wire coming out of the Romex before it gets to the twisting and just wrap that around the ground screw. This would be especially true if they forgot to ground the box. To do so quickly, they'd start the ground screw, pull the wire over to it, give it a short wrap, and tighten down the screw. Technically, this would likely violate the minimum wire length, but it would be functional. If you did it before trimming the wire to twist it, then you could leave enough length from the screw to meet the minimum length.
@@biffmalibu3733 I've seen metal boxes tied to conduit where the ground was secured to the danged clamp for the conduit + box connection. Then you get to the panel and see a massive bare copper cable tied from the panel through the concrete, literally "grounding" the ground.
Dawg...get this . back in the day with metal conduit (running between metal boxes) you didn't need a designated ground wire ... You only needed to pull in your current carrying (hots)and your neutrals... the mechanically connected pipe itself acted as the ground
Also when all plumbing was copper... An exceptable ground was taking a grounding electrode conductor (bare copper) from the panel and basically clamping it to a cold water pipe. (Which is still practiced today where there is copper plumbing ..but only as a supplementary (essentially backup) ground)....
Like others have said… the 14awg combo isn’t all bad for such a short run since it will not cause much voltage drop, but it would be a weak point depending on the length of the run being used. 4 inches of 14 awg can easily carry 20 amps if the total run resistance does not cause the voltage drop to pull enough amps over 14awg to cause a fire.
You didn’t mention the backstabbed receptacles ‘electricians’ love to use!!! Strange, weren’t all those wire nuts twists installed by “licensed electricians???” I’ve seen substandard electrical installations by ‘professionals’ my entire life (in my 60s). First thing I do in a new residence is check all the receptacles and wire nuts. As far as UL Wagos, anything that will help the DIYer do a safe connection should be encouraged.
I was looking for a comment on stabbed in wires on devices. I refuse to use that method. Same goes with using wagos. Screw terminals and wirenuts only, for me.
@@ElementofKindness Wagos are fine if used correctly. They're UL tested and NEC approved. They're also easier to add or remove circuits. We use them in industrial applications all the tie.
@@njineermike so are stab in receptacles, but I still don't use them. I'd like to see infrared images of stab connections and wagos at full circuit current.
@@ElementofKindness Those images are available on this platform. The difference between the Wagos and stab in receptacles is that Wagos are serviceable and stab in are supposed to be, but either the wire tends to fail at the connection point, or the stab release fails and the wire has to be cut. Both situations make the connection point unusable and requiring replacement of the entire receptacle because there is a wire fragment stuck in it.
😃great job and correct too....i like to twist my ground wires with pliers to get them nice and snug together when possible with a set of linemans pliers, etc....
A better way to do the ground wire would be to use a “Greenie”. It’s a green wire nut but with a hole at the top. One wire is longer than the others, it connects the wires normally but the longer one is sticking out to screw to the box.
Remember, you cannot connect 14 gauge to 12 like he mentioned in this video, unless the breaker is 15 amps. Also, you can connect 12 gauge to 14 gauge.
If the run from panel to box is long, you might use #12 on the long stretch to reduce the voltage drop, then use #14 inside the box. On a 15 Amp breaker.
even on a 15 amp circuit i'd argue it is a bad idea. you know some idiot is going to look at the wire from the breaker and decide to put a 20 amp breaker in.
I can only agree ,metal will strip the isolation bare, and metal can carry power so it's a no no in my opinion. The other dumb thing is the way to small ring under the green screws, as you can see in the video the cable wants to come out.
Somtimes you cant because of old framing being that the bay is too small to accept a single gang old work box. Also for the need of use with seal tight or anything that uses a TA like floor heat for example.
its the safest practice to hook the wire like that as long as its facing clock wise or the way the screw is tightening which he did. Every device besides breakers and gfci's are pretty much installed this way as well. Just please for the love of God dont back stab.
@@SgtZima they were wagos.i have been an electrician for 50 years and as far as i am concerned these are junk.Mobil home builders are using these and i have repaired three connections that were burning using these wagos.
Many people -- licensed journeyman electricians included -- struggle to properly secure a box to a permanent structure. Only one screw, drywall screws, nails, crooked, no cover, etc.
Have you ever seen any of these mistakes made in this video? Hopefully this was insightful. If you know of other common mistakes made, feel free to list them here. Never know when I may feature them in a future video! 😎
Is it acceptable to have one of the ground conductors (part of one of the NM cables) wrap around the box grounding screw and then get connected to the other ground conductors via a wire nut? instead of having a separate pigtail.
Depends on who you ask but it is my understanding that yes, that would be acceptable using the feed wire ground.
You neglected to point out that the NEC calls for 6 inch long wires beyond the sheathing inside the box.
You are correct. I did not mention that. And 3 inches past the front of the box. Thanks for the reminder for everyone.
I always make at least these for mistakes on every box I wire, sometimes if I'm lucky I can get at least 7 or ate in one two gang box. That takes some practice for sure, although some can do it right out of the gate (beginners luck) I would have more pictures of my work but for some mysterious reason a lot of these houses aren't there anymore. Crazy times
I almost forgot, my company name is
RE-VOLTING ELECTRIC
You'll be shocked by our work (it's that good)
My Dad was an electrician , and many times I would help him on jobs in the summer, and when it got to point where he could trust me to rough in a box ( they were ALL metal back when the dinosaurs roamed the earth!), Dad ALWAYS made sure I grounded the box with a crimped on copper terminal screwed to the box. Dad made sure it was done right! All these years later, I STILL remember that. Thanks Dad.
I am a fan of using crimp terminals especially on stranded wire.
I've never seen anything BUT metal boxes in new work. Plastic is usually just rework in my experience, and only for convenience. If you're doing new work, the box gets screwed to a stud, so you might as well make it metal and strong.
Just saying … please teach your own kids what your Dad taught you. And if you don’t have kids… teach some other kid. We need the skills and quality workmanship of our ancestors to passed forward. Thank you 😊
@@drumstyx it all depends on the specific application and/or if it's Residential vs. Commercial/industrial "new" work... both types of boxes definitely have there places and pros/cons... Cost usually being the largest factor
@@drumstyxnail on plastic boxes are used in new home construction never used steel boxes anymore except on block walls and commercial 😊
I'm working on my daughters house these days. Lots of new wiring, switches, fixtures, and lots of correcting DANGEROUS previous wiring (house is about 40 years old). Your detailed and professional videos are greatly appreciated. Helps me sleep at night that she isn't living in a fire hazard. Thank you!
Dangerous, but somehow survived just fine for 40 years...kinda makes you wonder about the actual risk with that. Perhaps some of this is a bit overblown.
@@WaspLife survivorship bias is a thing
@@SlavaZoneThat has nothing to do with this lol.
@@WaspLife It is absolutely true that things "survive just fine for 40 years". Usually that means no one ever pushed the wiring to its limit. Our electrical system is pretty reliable in that it can deliver the current we want even when things are not wired quite properly. For example, you can safely use a mis-wired outlet (swapped hot-neutral) for years because it was only every used to power a lamp. Then you add a clock radio, and it has terrible reception. You figure it's just because it was cheap. Then you decide that you want to charge your phone and your laptop from the same outlet. You plug in a power strip, and BAM.
That’s some great advice. In Bulgaria where I live, metal junction boxes are not that common in households. However, water heater switches are pretty often installed in metal boxes. Which can make it even more dangerous if the water becomes dangerous. Greatly explained, Sir.
Your written English is excellent. Better than most English speakers.
As a man who grew up in a house where we just called a guy to do stuff I never had to fix or install anything. Now as a maintenance worker for only 2 years I've learned a lot and realized how much stuff we should've been doing on our own. I like the tips you have and find them helpful as I can apply them to my job. Thanks
Tightening the loop of ground wire around a loose grounding screw literally made this video worth much more time than I spent watching. Thanks!
Thanks for the info buddy. The grounding screw on a metal box I will be installing for my finished basement project could've been something I forgot. Now it's etched in my brain to not forget. Have a blessed day and work safe brother.
It’s really a bond, not a ground. Boxes are bonded, equipment is grounded.
No man. Just use plastic box. No need for additional works.
On new work, I install those pre-made ground pigtails in each metal box ahead-of-time (and "Z" them out of the way). It beats fighting through other wires to get to the back of the box with the screw.
Great idea!
you should have a check with your supplier to see if they have the box with the ground preinstalled in it. we use them exclusively at my work and they are a real time saver. The Reynolds Company does list them and sell them with the grounds pre-installed. a quick round of googling should get you to a listing to be able to order them.
@@brunothehumble interesting.
Amen, Brother!!!
Great video, thank you. One thing on the 12awg and 14awg combo. Wire sizing is sometimes upsized due to length of run to avoid voltage drops. Personally I'm running power to my garden ~150' away from the breaker box. I'm running... i forget, 10 or 12 for the main run, but intend to use one size down in the boxes or the branches. It can handle the amprage, just would cause a problematic voltage drop over the distance. Either way, still an excellent video and I've certainly learned some.
@@Salvadorbalihai24 The tap rule is three meters / ten feet, not three feet.
Just as long as the circuit is protected at the smallest gauge rating . If you downsize to 14 gauge you can only protect it at 15 amps no higher. 29 amps for 12
@@Salvadorbalihai24 no
Poor guy has no idea what he just walked into with the whole 14 is cool on short bits. I'm staying out of it, for now.
@@gerdberg4188 #12 copper is limited to 20 amps in most cases, even though the amperage table lists it at 30 it is limited below in the fine print notes. There are conditions in industrial and commercial installations that are engineered for the higher amperage but definitely not for a residential application....so a #12 can't be on an overcurrent protective device above 20 amps.
Simple, concise, common sense. I am a DIYer, but I've always preferred a mechanical connection(twisted wire)
with a proper sized wire nut. Thank you for your simple good advice.
I agree. Really glad to hear you liked it. I really appreciate all of the feedback! Thanks a lot Ricky.
Ricky....that's because you are smart...wegos are for inside lighting connections
@@BlackVibeBallsack You cannot even correctly spell WAGO. wagos are under-rated in their spreadsheets and can actually reliably have much higher current pass through them then their rated current. i.e 20A / 300V.
Interesting to see the differences... Here in the Netherlands, you would typically see only plastics used in residential installations for boxes, conduits, sockets, switchgear and consumer units.
Wagos are, of course, well loved over here too. Wire nuts, though still available, are a thing of the past. Those you cannot trust DIYers to get right and the pros have long gone the way of the Wago because of the time savings they offer.
Plastic and glassfiber is usually used here too whenever the devices are not exposed on top of a surface. Metal boxes and conduit are used and needed for exposed (on the top of the surface) installations, which you normally only see in commercial buildings. In homes, it would be possibly in a basement with concrete walls or in a garage with new work and wiring installed on top of the surface. In Europe we have special cable allowed for running on surface, but I remember a crazy scenario in Finland, where regular metal sheated wire was used and we had to add panzer tubing on top of all exposed wires that were run below 1.70m in closets, etc... (This was in a summer home, and the year was 1980). You definitely have quite a set of rules over there too :)
I just bought a "metal "housing" with no ground wire, unless ground is copper wire at back of housing, only black pos and white neutral wires.
I never even thought of looking for plastic housing. My guy at Home Hardware selected metal housing. I don't think I had an option.
David
Innisfail, Ab.
Canada
@@davidweum Wtf is black pos? Black is live, not positive.
@@mernokimuvek
I KNOW THAT. I DIDNT SAY ANYTHING DIFFERENT. BLACK POS, WHITE NUETRAL, GROND IN BACK ON WALL, I ASSUME.
@@mernokimuvek
On mine it is.
Thank you for these videos. The biggest takeaway for me was using the stripper to make the hook to go around the screw. I was using needle nose to do it, and it wasn’t always easy to get the curve right. Everything else will help, too!
This video has done this exact same thing for me as well XD
You don’t loop anything.
Use a crimp tool and lug
@@pablomagee2999 waste of money and an extra failure point.
The number one thing I've been encountering is the electrical box left uncovered. And, they didn't leave any screws in the box for the cover to be replaced. I wish you had mentioned that and the kind/size of the replacement cover plate screws. Great information all the way around. Thanks.
The screws are 6-32
Thank you for separating "SHOCKED" from "ELECTRICUTED". It's so aggravating when someone says, "OW! I just got ELECTRICUTED!" To which I would reply, "Really? Then how are you telling me?" lol Great video, btw. Thanks!
Thanks for educating me as I am putting new outlets in metal box for the first time, only dealt with plastic boxes in the past
I love your videos. I am an electrical engineer by education and know all of the concepts of residential wiring but have learned better terminology from you. I would call the major theme of this video that I am necromancing "strain relief" as that is what I was taught. Thanks for sharing such great knowledge.
Just for clarification, if the incoming line carrying the power is #14 (common in an existing home), it's fine to use #14 or #12 coming off the Wago. I could see someone misunderstanding what you said as all the wires need to be the same size when they need to be as big or bigger than the source wire.
If we're clarifying here, the limiting factor is the breaker, not the wire.
12 AWG has a 20 amp capacity
14 AWG has a 15 amp capacity
So 14 AWG can be used in a circuit being fed by a 15 amp breaker. 12 AWG can be used in a circuit fed by a 20 amp breaker. 12 AWG can also be used in a circuit fed by only a 15 amp breaker but it's a waste of money as larger wire is more expensive.
@@hogroamer260 Sure, but lots of times you're going to find yourself with a roll of 12/2 that you're already using for the work and it's far more expensive to go buy some 14/2 than just use 8" of #12 of what you already have. This video was marked as DIY, so there isn't a truck or van with spools of wire to hit up.
The breaker and the wire are both limiting factors. If someone else installed #14 on a 20A breaker, you've got an entirely different problem on your hands than the receptacle you're working.
@plsreleasethekraken @plsreleasethekraken Yes, I get using what's on hand as long as it meets the breaker capacity. No need to be snarky, not saying what you said is wrong, just trying to summarize and clarify that the breaker dictates.
The design is dependent on the load, the breaker is chosen based on that. Then the wire size is chosen based on the breaker size (leaving out voltage drop situations). The breaker protects the wire, the wire is not a limiting factor. If someone used 14 AWG on a 20 amp circuit, that's a code violation and my comment is geared toward compliant work not every mess that a "DIY'er" can achieve. A DIY'er needs to know their limitations so they can seek out a professional. Just because there are UA-cam videos' doesn't mean everyone should tackle a job on their own. They may be putting their lives, and more importantly, the lives of others in jeopardy.
@@hogroamer260 sorry if that sounded snarky, it wasn't intended that way--just speaking practically.
Yes, it would be a code violation; I was just speaking in terms of engineering/physics that the wire can be the limitation. An electrician can install a 20A breaker with #12, and then a previous owner could extend the circuit with #14. It's a code violation, but as the home owner I don't think you should care as much about that as understanding that wire is your limiting factor on that circuit because everywhere else on the circuit where the initial electrician wired with #12 would be fine.
Again, mostly just trying to stick with the theme of the video where DIY opens up recep and finds this stuff. I do not think everyone should assume all the electrical done on their house was to code. It's never been that way anywhere I have lived.
Appreciate the discussion.
i mean you could run jumper cable thick #6 wire from your breaker and go to #14 gauge in the box if you wanted to on a 15 amp circuit. not a great idea but code would be fine with it.
One thing I learned the hard way to do is to check those Romex clamps for casting burrs that can cut into the Romex; I had to replace 30 feet of Romex after that lesson, when I turned on the breaker and ...BOOM...the breaker tripped and the Romex was damaged right at the clamp, leaving it too short to use.
Couldn't you just add another Jbox a bit further down the line to connect the old wire with a new one, instead of replacing 30 feet or Romex?
@@danielthommen8243 There was no room for a J-Box, without hiding it behind a wall (a code violation). The 30 feet of Romex didn't go to waste; most of it was used elsewhere.
Code Table 210.24 allows 20A branch circuit taps to be 14ga wire.
Only on copper, not aluminum or copper clad
@@dartrunner4599 1. He _literally_ showed he was using copper.
2. You cannot use aluminum or copper clad aluminum for a branch circuits of this size _at all_ .
@@zippitydoodah5693 Funny how people will debate you even when you present the code. I've been an electrician for about 30 years and I run across this or these guys that do these videos that give the wrong information. Dunning-Kruger effect rans rampant nowadays.
@@genjaxx1463 Couldn't have put that better myself. Did you complete one of the schools? IBEW? IEC? Stay cool, Sparky.
Thanks for bringing this up, I was hoping someone would.
Well thank you you taught this old Souper tradesman a lot on this video. I own 8 tradesman certificate's the one trade I just don't play with is electrical. I would much rather get a certified electrician. But I am 100% thankful to you for teaching me how to inspect. Thank you .
Been a Master Electrician for 28+ years.
Good video sir
I agree the things you pointed out are rather common code violations I run into as well. I must also add that there is no requirement in the National Electrical Code that the grounding screw must be green. The only bonding screw the code specifies to be green is a screw that is used for the main or system bonding jumper in panelboards and and other similar equipment. These green screws for the box type in the video are just a convenience product that works great for the application but is no requirement to use this specific product. Also the particular style of non metallic cable clamp you showed in the video is intended to be installed from the inside of the box. It is designed that way to take less space in the box. Most common places I use that one is in those shallow light and fan outlet boxes or maybe when fishing a cable into a box or cabinet that is flush in the wall and would be difficult to install a connector from the outside of the box.
If you install the non metallic clamp the other way around wouldn't it then keep the wire from pushing into the box but allow it to be pulled out?
those plastic clamps come in to varieties, one install inside to out and one installed outside to in. it is used correctly in this video
The grounding hole is not always raised. It is sometimes one of "mounting " holes. It's usually a little smaller and threaded. Lots of fun on a box mounted to wood. You either have to hang it off the stud for clearance or make clearance before mounting. Those green screws do not drill into wood very well and it will seem tight but is not all the way tight against the wire. Always wiggle that ground once you think it is "tight" to be sure! The boxes with a bump are preferred because the clearance is built in, but you don't always get what you want at the store!
@@jeremiahbullfrog9288 I like to mark the holes, then dril a big shallow hole under the hole :)
@@livingdeadbtu a drill/tap combo bit does all that in one go.
On older boxes that are re-used during renos that have no camel hump or threaded ground screw hole I use the pre-wired grounding clips that attach to the edge of the box. Faster and are code compliant.
@@davidyansky6605 i got a box of those, but never used them. Its just as easy and quick to use a drill/tap combo bit.
The best way I've found to make clearance is to either keep an awl in your bag that has been ground down to just under the hole size and push it into the hole after the box is in place. While that hole you make is smaller than the ground screw, it will allow the screw to push itself in much easier. I also keep 6/8/10 tap in my pouch which can work for that as well using the first #6 tap as the awl. However be careful of breaking it as these are very hard and brittle.
I love good videos like this with good close- up photography, clean explanations, and just the right amount of information. 👍
Thanks! Glad you liked it. Thanks a lot for the feedback!
Great video dude! I usually like to wrap one of thoes grounds directly to the ground screw before tieing them together so i can have extra space to make tails. There is little to no room for activities like to install a device in this box, which is why i typically will crimp sleeve my ground together instead of wire nutting. But if this is done its important to note you CAN NOT make jumpers with a crimp sleeve so wires can not be broken. Its kinda hard to explain this technique throught text. But non the less very educational
Excellent video. Concise and to the point. One thing to add is that the connection is everything. Not pre-twisting sometimes causes wires to pull into or push out of the wirenut. More on that point, wagos provide neither the contact area nor contact pressure for an adequate connection. I have personally found many examples where the heat produced by the inadequate contact of a wago have caused it to melt and catch fire. I even found one that burned through metal ballast cover. They should be illegal.
That makes me wonder if wagos are even rated for 15/20 amps? (Or just rated for some smaller appliance-level current draw like maybe 2-5 amps?) Yes, they seem silly, as a knife cut kind of connection is going to have a very small amount of contact. But: if we're being that technical, a soldered connection has a much lower resistance than even the tightest wound wire nut. 😆
using wirenuts should require a 6 month course on how to install them. they are terrible for newbies as they are so easy to screw up and hard to test. wagos are perfectly fine installed correctly for the application and are far easier to install correctly than a wirenut. also most manufacturer's on wirenuts nowadays specifically say not to pretwist so you take on liability as an installer if you do so. if there is ever a problem anywhere on the line and they are able to show you pretwisted against manufacturer recommendations your insurance will deny coverage.
You are right, these are common DIY mistakes, also I am with you, a good electrician twist the wires...it is just good workmanship. From the code book, sure, the pig tails to a receptacle should be the same size wire. I will point out that from an engineering point of view, #14 is rated for 12 amps in the tables, but we derate this because it can only do this in short lengths and would result in over heating in all but the shortest runs. We do the same with #12 which can carry 30 amps in short lengths. (look at the tables in the code book and you will notice the footnote about derating both) For that reason, while I would never use a smaller wire, #14 in pigtail length would have no problem with carrying the load and would probably not even get warm. Another good point about the green ground screw for the DIY guy, mounting screws are not allowed for grounding, ever.....but I would rather see it grounded to a mounting screw than not at all!
Yeah, hence difference tables for "chassis wiring" and "power transmission" that you often see in tables, smaller lengths are fine. That said, if I'm running NM wire, I'm using the same gauge if anything due to convenience of snipping off a piece of the roll I'm using for the hot, neutral and ground pig tails I'm all making.
Voltage drop is proportional to length, so the heating effect per inch will be the same for a pigtail as it is for twenty feet in the wall.
14 is not rated for 12 amps , rather it is not allowed to be loaded to more than 12 amps . It actually has higher ratings in the tables for deration purposes
Ya no no mounting screw
I'm better than good, and I don't pre twist my wires, pretty sure I've not ever had a connection fail. Wire nuts are a tension device squeezing and digging into the wires. If we consider the surface area making contact it's not hard to why twisting is counterproductive, especially when the manufacturer of the wire nuts says to not do it. I believe it may be leftover from the days of ceramic nuts, in that case it's most likely better, or even necessary
Excellent video. This is how how-to videos should be made. Clear and concise instruction, excellent camera angle(s), and well explained throughout. Thanks!
I couldn't have said it better 👏
It takes him 10 mins to say 3 things….
Excellent video. Exactly what I needed to help overcome my discomfort working with electrical.
Because American are dumb. All Chinese people who have passed physics in high school can do this.
This channel will come in very handy as I have 17' of kitchen/dining room wall that has to be rebuilt and there's a breaker box on the outside opposite the corner upper cabinet. The Romex cabling is most likely going through a schedule 40 or 80 conduit through the top plate and the individual cables then routed through the attic to the individual rooms for the lights and outlets. I can do the framing as the present wall is suffering from extensive termite damage. However, the box will have to be removed, and all cabling disconnected, pulled back through the top plate and the conduit installed in the new top plate and cabling run through to the breaker box. Of course, sections of the ceiling sheetrock will have to be removed to have room to work and all wall sheetrock and insulation removed and replaced as well. The consequence here is while the power is disconnected, I will be doing the repairs relying on a generator and battery powered equipment. All cabling and breakers must be labeled for proper reinstallation. May be 1-2 years before I pull the trigger on this project. All the termites gone, and the wall is temporarily supported for now. Won't know the extent of damage until all sheetrock and insulation is removed, also plumbing and natural gas lines present. Be doing a lot of framing, plumbing, and electrical code studying in the meantime.
No fluff, easy to understand, great flow of information (no pauses, ums or uhs), AND you know the right names for the parts you are demonstrating! Great job, man! I'm now a subscriber!
I have found over the years that when using the two screw connector can cause a dead short or a high resistance short if the screws are tightened too tight. Unfortunately they may not be found until after the rough-in is complete and power is applied. A high resistance short when coupled to a GFI circuit can be a bear to find. This goes for any metallic connector. The 2 screw connectors must be tightened very carefully and until the cable does not slip on a tug test. Over torquing can be almost impossible to find once the drywall is in place!!
Always wondered about that but never heard of it happening. possibly a burr was on inside of metal clamp that punctured wire?
Another thing I would point out is to just snug the clamp down on the metal NM connector. Over tightening the clamp can damage the cable causing a short circuit. I do agree they are the best connector and use them myself, just don’t over tighten them. I’ve been a journeyman electrician for 38 years.
Why would you use a metal connector when the new plastic ones are so much better
I mean after all it is plastic cable
@@gerdberg4188ecause as the video explains, the screw clamps hold more securely. I would only use plastic on data or maybe thermostat cables. Moving wires can work loose. Also, there are clamps that are usable from inside the box, though a bit tricky to work. One more thing--someone proffered that "How To Home" used the plastic device backwards. I disagree.
What was the additional black wire to a wire nut and and the same for a white? I didn't understand that
@@irish89055 those would be called pigtails that are meant to be connected to the receptacle, light or other device that the box is there to serve. If the box were just used as a junction point, those pigtails wouldn’t be necessary and wouldn’t be there.
Thank you for your video. I have been doing some electrical work at home and rewiring our garage with new breaker box and all. I didn't realize grounding the box would prevent electric shock and other problems. I'm going to fix mine first thing in the morning. Thank you for the advice.
I appreciate what you’re saying about the #14 used as a pigtail when the circuit is, apparently, 20-amp. However, I had this very discussion with the authority having jurisdiction (the inspector) when he tried to ding me for it. If installing multiple devices on a 20-amp circuit the NEC allows that those devices be rated at 15-amps. Using that logic I argued successfully that my pigtails could be #14. This same inspector once had a conniption when one of our guys didn’t use the code required green grounding screw to bond a metal enclosure. I asked him what the most important part of all this was and he said, “Grounding, of course!” I asked if it was and he said it was but the screw wasn’t green. A 10-32 screw is a 10-32 screw. I’d rather see it grounded with the “wrong” screw than not “because you didn’t want to break that rule.” In our trade there is nothing more important than grounding. Thank you for doing this video!
as an Electrician apprentice I have to shoot you major respect.
I caught 2/3 and didn't catch the 12 gauge wire.
Thank you for making some of us be better at our craft and home owners safer.
At first glance, even my mentor didn't spot that gauge difference first.
Although at second look, he did spot it... I didn't.
Again...thank you.
Much respect to trade and major respect to you.
I'm curious, there's no mention of the breaker size on this circuit. Just because it's 12 ga doesn't necessarily mean it's a 20 A circuit. It could be a really long run on a 15 A breaker, or the installer might have been out of 14 ga to finish the job. I don't see anything wrong offhand with using a 14 ga pigtail even though it's 12 ga coming in. Am I mistaken?
@@crisdunbar4753 I am still learning, but I would locate/isolate that circuit and factor in the amps it was intended for. If it's lights, fire away on that 14ga.
If it's plugs... eliminate all 14ga because you never know when someone is going to plug in a TV, Playstation and 1600 watt electric space heater.
I'm curios to see his answer too. (I've only been an apprentice electrician for 3 months... on the job training - no schooling)
@@ericallen7200 I guess that's my point. The video claims without qualification that the 14 ga pigtail is a mistake. This may also be a jurisdictional thing. Where I am (BC, Canada), 15 A general-purpose (mixed outlets and lighting) are the norm, with 14 ga cabling. But of course, using a 12 ga cable is perfectly acceptable (if uncommon) on a 15 A circuit. So I don't see the 14 ga pigtail as an automatic error.
The _intention_ of the circuit is beside the point I would say. If it's a 15 A breaker, the 14 ga pigtail is fine; if it's a 20 A breaker, it isn't, regardless of what is used for.
Note, I'm not even an apprentice, just a fairly well-educated amateur. =)
@@crisdunbar4753 code wise you have an issue still but reality wise i don't think it's a problem having the 14awg on a 20A circuit there as it is less than a foot and nothing returns to the main circuit there. 14awg will stand up to 20A at that length just fine. still not best practice and probably a code violation though not sure as i do know whire length plays a part in the code for amperage.
@@crisdunbar4753 we have anumber of 15a circuits here ran with 12awg wire. codewise it is fine to step down to 14awg there but it is a bad idea. the next idiot working in the circuit will see 12awg out of the breaker and assume he can slap a 20a breaker on there. not that i think it would actually be a problem as long as you aren't feeding out of the outlet 14awg that short should handle 20A without an issue but code will come down on you for it
FINALLY! A UA-cam video that actually cuts to the chase pretty quickly, and gives you good, concise, quick (and hopefully complete) information. Well done!
Thanks for all your work! Lots of stuff I did not learn at my tech school... plus even plumbing vids! (As a landlord, very useful)
You are very welcome! Glad you liked it. Thanks a lot for the feedback!
I am not an electrician, but the tips and techniques you demonstrate I use and I know then I'm doing it right.
That's a weird way of saying you are no electrician yet can do their job - which is what every DIY'er that cause house fires has said.
I ran into two of the issues you are illustrating. First, the metal octagon box I encountered and got shocked from didn’t have the bonding screw connecting the ground wire to the box. Second, it did have a metal romex connector installed but the wire was in at a steep angle and the installer tightened the clamp too tight, cutting into the hot wire and electrifying the box! I wasn’t working on that circuit but just bumped my elbow into it with a surprise! So lesson is, when using the metal wire clamps make sure to run the wire straight into the center and don’t over tighten!
Really good, stuff.
If I might add, the three neutrals marretted together, should be twisted a few more times so the “twist” is confirmed-viewable from below the barrel of the marrette
Completely agree. Thanks for the feedback Brian!
I've followed you for a while, and honestly, you have busted me on a few issues; I'm so glad you have. If I'm going to do the job, I want it done right. Thank you very much for the great videos.
Loved the video!! Gave me some good reminders on what to look for. I was concerned in that I'm updating some of light switches and plan on using the Wagos. On your image for your video there are words "DONT USE" and pointing at the Wago. Now I see it was about the smaller wire.
I missed that and I'm an electrician. Must be the camera angle.
WAGO's are a personal choice. If you do the strain relief on the Romex sheath and the wires going into the wago is not stressed and can not pull out they are fine.
When I am rebuilding 1930's floor lamps I replace the old wire nuts with Wago's, a 5 way for all neutrals, a 2 way for the switched hot single lower bulbs and a 3 way for the switched hots for the other two. Getting five 12 gauge stranded wires into a wire nut is hard but a Wago fixes that.
I have watched 3 of your vids. I’ve been a DIYer for years. Man I was doing it all wrong. Thank you!
You are welcome. Really glad to hear you have found value in the channel. Thanks a lot for the feedback!
Always learn something watching your videos and reading the comments. Thanks.
Really glad to hear it. Thanks a lot for the feedback!
Should also warn against overtightening the metal romex clamps. I went through a bunch of shorts before figuring out the perfect clamping force.
There is actually a torque spec from the mnfct for all those screws/bolts/lugs. Nobody pays any attention to it but a torque screwdriver is a good thing to have in your bag.
Common sense is also good to carry in your bag, well darn that's the fifth wire I've cut with the clamp today😅
Yes, the metal box should be grounded but grounding the box doesn't protect you from getting shocked. What really happens is if the box becomes energized and the box is grounded, then the breaker should trip because it causes a short. If you touch the box before the breaker trips, you will be shocked. Remember, grounding doesn't protect people from getting shocked, it just allows OCPD to operate properly.
Even if you do get shocked, you won't be the sole path to ground, and if you have the proper shoes, a 120V receptacle won't send enough amperage through the heart to kill you.
The chances of the wire touching the box and somebody touching the box that sitting behind a wall at the exact same time I probably a million to one
@@JayJay-gl2df Still, grounding is meant to protect wires from shorting and causing fires. It's not meant to protect people from being shocked. Regarding the box behind the sheet rock, the metal screw(s) on a typical plastic cover plate is grounded to the receptacle or the switch device which is grounded to the box, so technically you just would need to touch that screw.
@@JayJay-gl2df The Breaker won't always trip, and OCPD only works if there's an overcurrent. If the box is active with 8-50 ohms. Amperage could get up to 14A without tripping. With a proper ground, it would spike to 40-60A and instantly trip the breaker. GFCI rated equipment would catch this, but are 3x more expensive. There's also less than a 1/1million chance that a breaker is defective and remains open.
@@Krab17 two things though not that I would use a metal box but if there is a metal box make sure it's earthed so if the active does break off it will trip the breaker and replace the breaker with a Earth leakage circuit breaker I don't know in your country if they have them but in Australia you just swap out the old circuit breaker and put in a combination circuit breaker combined Earth leakage breaker One Piece unit it takes the place of the old circuit breaker
Metal boxes and twisting wires. Both uncommon in the Netherlands for at least 30 years.
Metal boxes are pretty rare in the US for recent residential construction. I see them when used with conduit, when mounted on masonry basement walls, or on old installations.
Even in exposed commercial or industrial applications?
I wanted to leave a comment and thank you for making such a really good video!! The videos that you have posted so much better than all the other ones I've seen. You take your time and actually explain everything step by step. A lot of videos I've seen they will explain how things go but seems like most of the important parts that you need to know and is the reason you are looking up the videos they don't demonstrate how it is done they get to that step of the process and pretty much skip over it and it's already finished so you keep backing up the video and pausing it at spots so you can kind of figure out yourself how they did it and like I said that's the reason we are watching the videos in the first place lol. I do electrical wiring to make military and medical devices which it is important that they are made correctly u don't want them to fail or malfunction when they are needed. I'm in charge of training the new hires and most of them will come over to me afterwards and thank me for being patient and taking my time while explaining each step and if they don't fully understand at 1st and watch what they are doing to help figure out an correct what and why they are having trouble. I now understand what they meant because that's exactly how I felt when watching ur videos!! Because some of the people that make videos I don't know why they bother they remind me of the guy that trained me and when I asked a question because I was confused he would tell me to look at the paperwork it should tell me but obviously I didn't understand that's why I was asking him LOL and there's no sense teaching somebody if not going to teach them right. sorry for such a long comment but thought it was important to give thanks and let you know that there are people out there that do appreciate you taking the time and making these videos to help people. How much do you know about fixing cars 😆
Thanks for all the great videos. I also am a fan of using the plastic insulating bushing.
Whew! I have been doing it right all these years. This is a great go to video to show friends that want to try their own. The mistakes I found in my home after I bought it were a bit unsafe. Just subbed.
Great video. However as you stated that you have to use a green ground screw. I agree with you on that but code says that you can use a screw that is machine type and color truly doesn't matter. Now for me I am like you, I use green because I have thousands. Your videos are very helpful and I always appreciate a great tradesm. Keep up the good work.
I agree, there is no code for color and they need to be machine screws. I just stated what I did about the screws as you know they are going to work and they are so easy to find for folks in the electrical section. Wouldn’t want someone just using a deck screw. Thanks a lot for the feedback! I have enjoyed and learned a few things from your videos as well.
Yes there is mention of green screws
@@gerdberg4188 That's for the MAIN or SUPPLY jumper (if its a jumper - The main panel bonding jumper)
Wire size changes in a circuit happen all the time. As long as the wire ampacity exceeds the breaker there’s no issue with having different gauges of wire in a Wago. In fact one of the massive benefits of Wagos over other other wire nut alternatives is how easy it is to adapt from say 12ga to 16ga. Of course when installing a new breaker and running a new circuit you should just select the appropriate wire gauge. But oftentimes wiring is oversized for the breaker, and the equipment you’re tying in has smaller wiring than the circuit.
I seen wagos fail in high hat lighting where the lamp heat combined with attic humidity caused corrosion.
Not a fan as the actual size of the surface contact is less than a regular wire nut.
@@mikemccormack3997 at least Wagos are outrageously $$$
@@mikemccormack3997how would the same not happen in a nut?
the bare wires are touching each other, and the wire nut screw ring cuts into and surrounds the outer copper surface of the wires. Then copper wire corrosion less of an issue than the metal surface of a wago ? A lot more force bears down onto the bare copper using a wire nut.@@sparksmcgee6641
@@mikemccormack3997wago got you covered with their 207-1331 it's ipx-8 rated
The connectors you're referring to are not meant for stain relief it is meant to protect the wire from shorting on the metal box. Propper stappling of the wire before entering the box is wear you get the strain relief from. Also, the tap rule does allow for different wire gauges' to be used. A common Method to avoid voltage drop is to run #10 wire throughout and then switch to #12 at the device location.
Sir, I agree with almost everything you've said, but there is one thing I must bring up. Wire gauge is in fact dependent on length. While code may or may not require a 12g pigtail, it is completely safe and adequate. Consider these two examples; while a 20 amp circuit may require 12 gauge wire, it may require a heavier gauge if the run is excessive in length. On the other side of that, consider a window mounted air conditioner requiring a 20 amp circuit on 12 gauge wire that comes with a 12 foot long 16 gauge cord. Incidentally, I just installed such an air conditioner in my shop storage room/office. I know it may not meet my jurisdiction's code, but I extended my 20 amp, 12 gauge run closer to my a/c by five feet with 14 gauge wire. I also shortened the 16 gauge cord by ten feet. So I've actually increased the current capacity even though I used a smaller wire to feed my receptacle. Sometimes code does not mean better.
Having said all that, I still learn from you. Thank you.
I agree with your logic but why oh why would you not use 12AWG on that extension???? Code is code even if it's for legal reasons.
@@hogroamer260 Because it would have required a trip to town and for the purchase of another roll of 12 gauge. The only reason for this would have been the to appease a code which is completely irrelevant in my rural personal shop. I am much more concerned with safety than I am with meeting code.
It’s been a while since I’ve opened a code book, but the multiple gauges on one Wago seems like it would be fine IF the cable run is long enough to have to account for voltage drop. As long as it’s a 15-amp receptacle on a 15-amp breaker, I believe this would be code-compliant. The Wago would have to be listed for both wire sizes too.
Yes, I'd say that if you're going to pigtail that to a light, going to 14 gauge would be fine. If doing an outlet, I would never drop the gauge of wire down.
Probably in the 3rd world.
14ga cu wire is good for 15a circuit. It's stupid to run 12ga all of the way to the box, then pigtail with 14ga, but if the chicory is on a15a breaker/ fuse, it will not cause a fire. The breaker will trip before the circuit gets overloaded. It is a waste of more expensive material to run the home run in 12/2wg, then use 14ga for a pigtail that would require a15a breaker vs a20a
@@bilmoe5856 Not true at all! First and foremost once behind the meter you pay for the losses. The bigger issue is voltage drop. In a larger house, you definitely run 12 up to the first junction, then 14 from there just to reduce inductance and resistance and still use a 15amp breaker. In some areas, it is even code that you are actually required to do this beyond about 50-75ft (most places closer to 100ft).
I'd say in most houses you aren't gonna be concerned about voltage drop
Small correction: You do not NEED to use a ground screw to ground the box. Article 250.8 A) lists permitted methods for grounding and bonding, #5 is "machine screw-type fasteners that engage not less than two threads or are secured with a nut". So any 10-32, 8-32, 6-32 etc. type screw can be used as long as it engages at least two threads or is secured by a nut. Note you cannot use regular wood or sheet rock screws. With that being said those ground screws are a great option because the wide head makes it easy to grip the wire, but if you don't have them handy, a regular machine screw will satisfy code requirements.
I think the intention of the NEC code is to ensure a coarse threaded screw ( i.e. wood screw or sheetrock screw) is not used for this purpose. A machine screw thread, has a much tighter thread, and is less likely to come loose from its metallic seat.
A lot of people think that screw has to be green and it does not. the only screw that has to be green is when you are bonding a service neutral to the ground in a panel or first means of disconnect.
Although you are technically correct. It's bad trade practice. I know of inspectors who would fail just because a proper ground screw was not used. However that was Canada, where bad trade practice or sloppy work is written into the CEC as failable. Not sure about the NEC. In Canada the same thing applies to not pretwisting your conductors for marrettes/wirenuts. It's bad trade practice and failable.
Can you still use grounding clips? I’ve seen 1980s construction that just clipped the wires to front edge of the box.
And I have failed inspection solely for not using green on a new sub panel and garage install.
Great vid. For the pigtails, don’t bury them under the feed conductors.
Thanks for the content. Good stuff. Suggestion for future content: an electrician is coming tomorrow for a kitchen remodel ... consult. (They will do the work another day.) What are things I can consider and do to GET THE MOST OUT OF AN ELECTRICIAN - quality work, productivity, and EXPERTISE included? Sure, there is no-brainer stuff like clearing a path to the panel, but I was surprised to hear from an expert to NOT clean the area too much as it might hide clues when troubleshooting problems. Should I have a laundry list of other items that could be picked up, or should I limit the "extras" to just one or two? What do you encounter that customers could do to make your job easier? What have customers done for you that really made your day? Do you accept tips? How often are you tipped? Is it better to tip before the work, or after? What am I missing?
These are the questions I would love if more customers asked. Here are the answers:
* Hire a licensed electrical contractor.
* DO clear any personal items in the area where he/she will be working.
* DON'T try and work on it first or take off cover plates or anything.
* If the electrician is there hourly, feel free to ask if he/she would mind looking at a couple things. If they're there on a a specific task they were contracted for, that would be a separate deal that would need to be worked out.
* To make our jobs easier, have your car moved so we can park as close to the work as possible as we make many trips back and forth to the truck. Lock your dogs up outside the work area and try to keep them from barking all day. Same goes for you'd kids🙂.
* Offer them a cold drink.
* Yes, we graciously accept tips which I get every once in a while. Make tipping the last thing you do as they're leaving.
* Don't try and help. If a customer watches me work I'm not bothered but I would prefer otherwise.
SOURCE: I'm an electrician.
Hope this helps!
Strain relief saved my home from burning down. I had a licensed plumber replace my hot water heater. My home has aluminum wire, but even many copper wired homed still use aluminum wire for large 240V circuits. My old water heater had an old school pool timer on the wall the AL wire came to two terminals and whip to my old water heater went to the other set. The contractor removed that timer and wire nutted the new water heater whip to the AL wire directly with couple of yellow wire nuts. I cam home found a burn mark on my wall. When I removed the plate off the wall entire box was burned up the aluminum wire burned like a fuse back to the strain relief where it actually got enough current to flow to trip the breaker. The strain relief forced the wires together tightly when the insulation burned off it tripped the breaker. If it had gotten back up into the attic likely would have caused a fire. The fact that have two wires touching they liquefy. It's lot like an arc welder.
The third most common beginner mistake is to not do a box fill calculation to be sure the box volume is large enough to accommodate the wires, etc. This can be a big problem when adding something on to a preexisting box like a GFCI or more wires to retrofit a new branch for another plug down the line.
Lrnd tht a long time ago. Always use a deep box for gfci,dimmers,Decora it's not much more money and you will save on the labor or work harder to save money up front but I lrned a longwhile time is money and so is energy lol
Its more the hard to bend copper that is the issue when trying to get a gfci outlet in there. Yes the gfci is a lot deeper but trying to get those 14 gauge wires to bend and push back into that tiny box is a task in itself.
Maybe super flexible romex 🤷🏽♂️
So now I have to learn what a "box fill calculation" is!!! When do I stop being a beginner and enter the intermediate stage of DIY'ing? I mean, I've stabbed myself with sharp wires at least 50 times and got tickled by the zappy electrons twice!
@@Mike_H76 sparky channel or electrician u great vids on the topic
Y a that’s right some wants a gfi …..old metal box …….three pairs no ground …..gfi won¡t fit …….
I am sorry it is only going to cost you 500 dollars to change this outlet !!!!!!
As I can see, In Canada, we have better boxes. The box comes with the larger ground screw and there is a recess on each side of the screw which keeps the wire from going out. Even with your green screw and the fact that you correctly looped the wire around the screw, the wire tends to go out of the screw on the left side. We also have theses green screws but usually, they have something to retain the wire in the receptacle to retain the wire. Nice video and well explained.
Yep, the boxes here pretty much always come with the ground screw. I think the green screw might be more of an American thing though as the screw that comes on boxes here are usually a silver colored pan head with a much wider head that helps lock the wire in place better. We do have some receptacles and light switches here that come with a green ground wire screw, but I'd imagine that those are built to American electrical standards, but have also gained CSA approval.
But you are still in Canada so does it matter much that your boxes are better?
Canada, where freedom goes to die...
@@billymacktexasdetective5827 Careful casting stones there bro. The country South of Canada has no freedom other than the freedom to make poor choices and that is the last I'll say about that (off topic).
The fact a plastic box even HAS a ground screw in it is to make it brain dead easy to locate the ground cluster by following the wire attached TO that screw. Personally, I just wish all these boxes were deeper than they are so I don't have to stuff the wires in like the worst game of Tetris ever invented when installing dimmers and timers.
@stevedixon921
Easy there. That country that apparently makes those poor choices is the ONLY reason Canada has not been invaded and claimed by whomever really.
So let's not get carried away!
@@brizzle8797Not something I choose to unpack today, but thank you for the candor. Have good day now, eh.
When grounding a metal box, I like to make a loop with the ground wire and crimp it with a collar, so it’s like a noose that goes around the ground screw for a more secure connection. Then, I use the remaining length of the ground wire to twist and crimp it with the other ground wires in the box. It gives an extra layer of security and ensures that the grounding connection stays solid even if anything shifts or loosens over time.
Thank you man I'm gonna install a metal box today I didn't know that grounding rule.
I'll just throw this out there as a general tip for anyone working on older houses like mine.
Always treat the box, receptacle, whatever you're working on as if it is live. Even if you just flipped the breaker and tested the circuit. I'm remodeling my kitchen, in a house that was built in 1920. Wiring is sketchy to say the least, but everything I've found so far in the wall I'm working on is modern Romex so I wasn't too worried. Yeah, well I shut off power to a circuit I was going to modify and add some receptacles to. I plugged a tester into the outlet I was about to take apart, it did nothing. Once I took the cover off and pulled the receptacle out a bit I tested the circuit with a multi-meter. No juice detected. So I started disconnecting things. I had already pulled the hot wires off and was working on the neutral wires. As soon as I got one of them a bit loose and was wiggling it to pull it away from the screw I got a bit of arcing. I was wearing mechanics gloves with a rubberized coating, and using tools with plastic handles, so I didn't feel anything. My theory now is some other circuit nearby must be stealing neutral from the one I was working on. Pretty common in old houses.
At that point I told my wife to light some candles and shut the main power off to finish the work. So yeah, just like with guns, always assume it's "loaded". There are videos out there on how to safely work on live circuits. You shouldn't do it on purpose, but using the techniques every time you touch a circuit is a good plan anyway.
Even newish house. Mine was built in 1999. Flipped breaker to living room tested an outlet and confirmed no power. Oh but the corner outlet near the hallway was live. Ouch…
And...know who you're working with. While I'm adding ceiling lights and juice for an electric oven the homeowner was in the back of the house working on the bathroom wiring which I had no idea he was doing. When I throw in the breakers and walk back into the kitchen I hear his wife screaming about a fire and I could smell overheated wires. I thought I had made mistakes but his wife made him tell me the truth. He undid his work and my work tested perfect. He tried to lie about it but I had separated, metered and marked all wires in a 3-unit box when I started and when I hurriedly saved the breakers and began metering those wires again they were different than before. I showed him and his wife made him admit what he'd done. Without her I would have been there for days.
Was working in an old church and had a neutral wire arc to another neutral with the breakers already cut...
@@t3hgr8gabbo fun times!
Great Job, just wanted to let you know I think you have one of the best approaches and by far the most useful, easy to understand formats of any educational videos on UA-cam. The videos are accurate and explain the necessary information and steps needed to complete the process and installation of the particular project being worked on. The instructions given are simple and easy to follow and there are no unnecessary procedures or tangents to distract or overcomplicate the lesson. You give some different options including the preferred method you like to use for the situation. Most importantly, you make sure the message, "Of what not to do! or this is dangerous BECAUSE!" is pointed out without being overbearing or sounding ridiculous. I think you explain yourself well, giving you credibility for your knowledge of the trade. I typically don't like watching UA-cam videos for many different reasons; the lack of hosts' intelligence and no confidence in the material being discussed. Primarily my main objection is when the teacher of the video tries to be a comedian or brings their personal life into the show. You understand the importance of the lesson and respect the viewer's time.
I would like to ask you if you could do a segment on " How To" #1. Wire 3 and 4-way switches power to light/ power to switch, receptacle in the middle. #2 where to start when wiring a lighting circuit and how many rooms and LED fixtures can a 20 amp breaker carry( I know most lighting circuits are 15 amp) #3 a bedroom receptacle circuit. All circuits starting from the panel, like new construction.
Well I am really glad to hear you are finding value in the content! Thanks a lot for sharing all of that with me. Those are all good subjects! I will see if I can get some of it into one of the videos! Thanks a lot for the ideas and again for the well thought out feedback!
just what i got on you tube just now to see how to do something just like the project you were showing..perfect timing...thanx..
You are very welcome! Glad you liked it and it was good timing. Thanks a lot for the feedback!
Another topic that warrants a separate video is box fill limitations and requirements. I’ll bet that many DIYers aren’t familiar with this.
I liked your video. One thing that always concerned me as a electrical inspector was when I see wire that had been stripped with a razor knife. A lot of times as this is done fast, the blade cuts through the conductor jacket as well as the outer jacket. Best to use your t 5s or strippers to barely score outer jacket to allow a clean break without touching inner insulated wires. On uf wire, all I needed was my linemans pliers only.
Awesome. Putting in a metal box now. Great timing. Learned something
Once you have a Wago connector filled, do a wrap of tape around it. It prevents the levers getting caught and potentially releasing the wire.
This is how I was taught
WAGO as a German company has a lot of accessories you won’t find elsewhere.
Spelsberg ABOX SL 2.5/4 has plastic “sockets” where you can push the WAGO’s in once they’re connected, which makes everything look nice and prevents the levers to be opened.
Google for an image - it’s brilliant and an incredible time saver.
@@maxking3 Any idea if those boxes are code-compliant in the US?
@@PongoXBongo I can only see the VDE certs for these boxes on their website. Other components are listed also with IEC and UL Type Ratings, which would be sufficient for the US.
So I guess the answer is either „No“ or „Not yet“.
(But they‘re really cool nonetheless!)
I'd be much more concerned with the connectorless wire insulation being cut by the rough edge of the box than the wiring being pulled loose. But, I also put a romex staple within 12" of the box.
Right on! 👍
Good point. I had a neutral wire get frayed from the box when installing it
Didn't realize it until I flipped the breaker on. The breaker immediately tripped and once I investigated and found the problem, I realized how lucky I was I didn't burn the house down. If I hadn't been there and it hadn't tripped, it could have been bad news. Do be careful when pushing the wires back in the box.
Classic goodness I learned in high school ‘Basic Electricity’ and slowly forgot as plastic boxes became the norm. Thank you for setting us straight and reminding of details when using metal boxes.
I started using Wagos quite a bit recently. They're very convenient, but I've discovered that the levers can pop open very easily when you're pushing everything back in the box. Bad design flaw. I'm tempted to start taping them shut, but then why not just go back to wire nuts? So be sure to visually inspect your Wagos before you button things up.
Yup, that is something that definitely needs to be watched! Thanks for sharing your experience with it.
the visual inspection combined with the test point for leads is good enough reason to switch from wirenuts. not to mention the ease for connections between solid and stranded wire. that is far far to easy to screw up with a wirenut especially for DIYers
Just use electrical tape and wrap it...works all the time
The best way to ground that 4-square box (or any metal box) is to take the ground wire from the "hot" into the box, wrap it around the ground screw (but don't cut it.) It comes into the box, around the ground screw and continues to the wire nut UNCUT.
That way the ground wire is not cut before it is connected to the box and if/when the wire nut is removed, your box is still grounded.
If your inspector likes to see a ground clip without removing the cover, ground box as described above. Then pigtail the ground, using the pigtail for the ground clip.
The min. allowed dimension of the wire depends on the circuit breaker and the loop impedance. If you use a 10A or smaller circuit breaker there can still be different wire-types mixed together because of the voltage drop (here we often have 4mm² until the last box and then 2,5mm³ to sockets (16A breaker) or 1,5mm² to lamps (13A breaker), all depending on your loop impendance). You always have to know the max. current on that circuit and note the diameter in the distribution plan. And measure the loop impedance at the very end.
In North American standards, it would be ok to mix 12 and 14 AWG on a 15 amp circuit as that only requires 14 AWG, but not on a 20 amp circuit as that requires 12 AWG.
That said, a pigtail like this is unlikely to burn down or melt anything either way, as with such a short wire, there's very little resistance to generate a lot of heat. Also, it's in a metal box, so there shouldn't be anything to catch fire even if it does get hot. Still, follow the code, it exists for a reason.
If you want to use wagos, make sure to get these 221 lever ones, they are sweet.
Pretty sure you're allowed to run 12 gauge wire off a 15A breaker if you want/need in which case the 14 gauge wire would be fine. That being said if it was off a 20A breaker I'd generally avoid it but I would have to review the appropriate electrical code to see if there are any special cases that would allow 14 gauge wire to be used for 20A which may apply.
You can run #12 on a 15 amp. However, should never run different sized wires on a circuit. The next person may assume the circuit is capable of a 20 amp circuit breaker. Every situation is different.
@@HowToHomeDIY Agreed.
@@HowToHomeDIY if the next person assumes , then they did not do their home work . Yes you can protect 12 gauge at 15 amps . Maybe you have a 450 foot run to an out building with a piece of equipment . It could very well require 10 gauge wire to support a 15 amp circuit . You cannot protect 14 gauge any higher than 15 amps in any case no exceptions . Well except motors of course .
@@gerdberg4188 what's the ampacity of 14ga THHN?
Much higher than 14NM-B
@@etherealrose2139 the conductors in the Romex assembly are thhn
Excellent video. Re WAGO lever nuts, on occasion I've had correctly installed levers pop up. Now I wrap them all with electrical tape, problem solved.
You say 12 vs 14 doesn’t make sense but it does make sense. The hot could continue onto another box for another load, so it might need 12awg to handle multiple loads, but the pigtail for your one load here could very well do fine with 14awg
Additionally, all the wires coming into the box should extend a minimum of 6-in from the final finished surface (box edge if surface mounted or plaster ring if recessed) once spliced together which may mean leaving up to 9-10 inches of stripped wire in the box for each conductor. The pigtails don't count as this length. This is the biggest mistake DIY-ers make with ANY kind of electrical box.
NEC 300.14 => 6" of free conductor from the point where it emerges from the sheath, and if the box is smaller than 8" on a side (like you can't get you hand in the box because its just a two gang box), then 3" of the total must extend beyond the opening. Most nail on plastic boxes are less than 3" deep. Working with wires that come out just 3" from the box totally sucks. But that is minimum code. My habit is to have 9" total length of free conductor. Easier to work with.
I go 8 inches from where they come in to the end because that's my hand size easy to make it all the same
Not just DIY’ers. I’ve seen plenty electricians cut the wires too short. I always cut the wires to the length of my lineman’s when cutting in. That way you have plenty extra when you go to trim out. Nothing worse that having to do service work on devices that have about 3 inches of wire past the box.
That's a myth that needs busting, its not from the box edge, its from where it comes into the box. Too long can be just as much of a pain or more than too short, especially with larger gauge wires on bigger receptacles, you're not even close to approaching box fill from a yoke and wires standpoint, but its obviously ridiculously too crowded when you try to shut it up.
@@snap-off5383 It's my "opinion" that it should which is why I wrote "should" rather than "shall." By code, conductors shall extend at least 3-in from any box with an opening less than 8-in in any dimension. So if you're installing a deep metal wall case (4-in) you need at least 7-1/2-in of stripped wire to meet code minimum (taking minimum bending radius into account). Strip the wires ~3/4-in to terminate to a device, and you're attaching that device about two inches away from the front of the box. Fun. But go ahead, let's tell the DIY-ers that it's okay to do that crap. Who cares about professional best practices anyway? Right?
There was a short period of time in the 1950's where grounded wiring was used but not grounded outlets. The ground wires were connected to the boxes only. My house was done this way so I went around to every outlet with a grounded box, replaced the receptacles with three prong, and used pigtails to connect them to the grounded boxes.
Should have used plastic boxes . Unless you had metal cable .
@@gerdberg4188 not practical, how are you gonna replace all the boxes with plastic without destroying the house
@@gerdberg4188 Metal boxes are still used here and they still have to be grounded as well.
That time period varied. My mother's house - built in 1962 - had ground wires running to the boxes only. That made it easy to change to grounded outlets. The boxes are small, and GFCI outlets would not fit until Eaton offered their smaller ones.
Another thing I had not seen before: No wire nuts in the original wiring. Instead, wires had been stripped, twisted, and a sleeve crimped around them, then a wrap with rubber tape. That took a LOT of labor.
I think that the grounded boxes of some years ago, even conduit that ran between boxes used an outlet that self grounded through the mounting ears to the metal box. When changing outlets in these older boxes make sure you don't grab a handful of the 49 cent vriety. Most of those do not self ground to an older system. That cheap shit should be outlawed, 49 cents against a correct outlet which will save your house or life.
What I would see a lot of people do to fix the ground would be to take advantage of the length of ground wire coming out of the Romex before it gets to the twisting and just wrap that around the ground screw. This would be especially true if they forgot to ground the box. To do so quickly, they'd start the ground screw, pull the wire over to it, give it a short wrap, and tighten down the screw. Technically, this would likely violate the minimum wire length, but it would be functional. If you did it before trimming the wire to twist it, then you could leave enough length from the screw to meet the minimum length.
You can always extend the wire especially a ground with a wire nut , wago, push in , or a coppercrimp
I always leave one long just for that reason. I've seen some old houses where the bond was pinched under the box. Not code but at least it has a bond
@@biffmalibu3733 I've seen metal boxes tied to conduit where the ground was secured to the danged clamp for the conduit + box connection. Then you get to the panel and see a massive bare copper cable tied from the panel through the concrete, literally "grounding" the ground.
Dawg...get this . back in the day with metal conduit (running between metal boxes) you didn't need a designated ground wire ... You only needed to pull in your current carrying (hots)and your neutrals... the mechanically connected pipe itself acted as the ground
Also when all plumbing was copper... An exceptable ground was taking a grounding electrode conductor (bare copper) from the panel and basically clamping it to a cold water pipe. (Which is still practiced today where there is copper plumbing ..but only as a supplementary (essentially backup) ground)....
DIYer giving electrical advice, love to see it!
Glad to hear it.
You explain things very clearly and succinctly. Thank you.
You are very welcome! Really glad to hear you liked it! Thanks a lot for the feedback Dave!
Like others have said… the 14awg combo isn’t all bad for such a short run since it will not cause much voltage drop, but it would be a weak point depending on the length of the run being used. 4 inches of 14 awg can easily carry 20 amps if the total run resistance does not cause the voltage drop to pull enough amps over 14awg to cause a fire.
still a code violation
Greenie wire nuts for grounding
You didn’t mention the backstabbed receptacles ‘electricians’ love to use!!! Strange, weren’t all those wire nuts twists installed by “licensed electricians???” I’ve seen substandard electrical installations by ‘professionals’ my entire life (in my 60s). First thing I do in a new residence is check all the receptacles and wire nuts. As far as UL Wagos, anything that will help the DIYer do a safe connection should be encouraged.
I was looking for a comment on stabbed in wires on devices. I refuse to use that method. Same goes with using wagos. Screw terminals and wirenuts only, for me.
I despise those things. Every time I have to service an outlet with those used, they never release correctly and I need to cut and restrip the wire.
@@ElementofKindness Wagos are fine if used correctly. They're UL tested and NEC approved. They're also easier to add or remove circuits. We use them in industrial applications all the tie.
@@njineermike so are stab in receptacles, but I still don't use them.
I'd like to see infrared images of stab connections and wagos at full circuit current.
@@ElementofKindness Those images are available on this platform. The difference between the Wagos and stab in receptacles is that Wagos are serviceable and stab in are supposed to be, but either the wire tends to fail at the connection point, or the stab release fails and the wire has to be cut. Both situations make the connection point unusable and requiring replacement of the entire receptacle because there is a wire fragment stuck in it.
Thank you for this video! You probably saved me from a future headache. I'm just a DIYer and I made the ground wire mistake. Going out to fix it now.
U never use metal boxes for Romex
Mc cable or conduit is the correct way to use four square boxes
😃great job and correct too....i like to twist my ground wires with pliers to get them nice and snug together when possible with a set of linemans pliers, etc....
Yup, I also find it just makes a nice solid connection that you can rely on! Thanks a lot for the feedback Melvin! Really glad to hear you liked it.
A better way to do the ground wire would be to use a “Greenie”. It’s a green wire nut but with a hole at the top. One wire is longer than the others, it connects the wires normally but the longer one is sticking out to screw to the box.
Certainly an option. I definitely like using the greenie in many applications. Thanks for the input!
Remember, you cannot connect 14 gauge to 12 like he mentioned in this video, unless the breaker is 15 amps. Also, you can connect 12 gauge to 14 gauge.
If the run from panel to box is long, you might use #12 on the long stretch to reduce the voltage drop, then use #14 inside the box. On a 15 Amp breaker.
even on a 15 amp circuit i'd argue it is a bad idea. you know some idiot is going to look at the wire from the breaker and decide to put a 20 amp breaker in.
Common mistake is using a metal box in the first place...
Yes because metal boxes definitely haven't been used for years without any issues! 👍
It makes sense except for the plastic boxes are not very sturdy
How do you feel about those Gardner Bender or southwire clip-on box anchors
My dad used those a lot when he was in the trade .
Love these Wago clips, and I do wrap them with electrical tape to keep the little switches in place.
Yeah that will work! Thanks a lot for the input Michael!
Perhaps I missed it, but watt is the significance of the green screw?
These “wrong” connectors with the black cables are actually the standard in new houses in the Netherlands now.
You didn't watch until the end, did you? ;)
@@davidjrb I’m afraid you’re right 😂
Why not use plastic boxes in residential installations
I can only agree ,metal will strip the isolation bare, and metal can carry power so it's a no no in my opinion. The other dumb thing is the way to small ring under the green screws, as you can see in the video the cable wants to come out.
He was just using this box in this case, to show the problem not grounding the box, if you use one.
Somtimes you cant because of old framing being that the bay is too small to accept a single gang old work box. Also for the need of use with seal tight or anything that uses a TA like floor heat for example.
its the safest practice to hook the wire like that as long as its facing clock wise or the way the screw is tightening which he did. Every device besides breakers and gfci's are pretty much installed this way as well. Just please for the love of God dont back stab.
wagos are junk.i already saw three connections using these pieces of crap burned off.wire nuts are the way to go.period.
Were they actual Wagos or just generic push connectors?
@@SgtZima they were wagos.i have been an electrician for 50 years and as far as i am concerned these are junk.Mobil home builders are using these and i have repaired three connections that were burning using these wagos.
@@charleskovalewski5210 Push connectors or lever nuts?
@@SgtZima wago lever
Nicely explained. Very clear. No waffle. 👍👍👍
Many people -- licensed journeyman electricians included -- struggle to properly secure a box to a permanent structure. Only one screw, drywall screws, nails, crooked, no cover, etc.