I did not have to do this with SolidWorks 2023, the realview graphics just worked by default with my RTX 4080 Super. But when I upgraded to SolidWorks 2024 on the same computer with the same GPU, realview graphics was gone. This trick worked perfectly to bring it back, thank you so much!
Thank you so much, i just recently upgraded from 2022 to 2024 with a 3050 and i could not figure this out, i tried this and it worked so thank you so much.
In addition to adding the workaround key, you must enable "Enhanced graphics performance(requires SolidWorks restart)" and "Hardware accelerated silhouette edge" under the performance tab in the settings and scroll to the bottom.
please help. the realview graphics has been enabled but there is no actual render effect on the 3D Model. If I use 31408, the model is grayed out. If I use 30008 or 30408, nothing is happening. My software is solidworks 2024 student edition. graphics card, NVIDIA GeForce GTX 1650 Ti/PCIe/SSE2. thanks for your help.
I initially had this problem. You must enable "Enhanced graphics performance(requires SolidWorks restart)" as well as "Hardware accelerated silhouette edge" under the performance tab in the settings and scroll to the bottom.
It STILL doesn't work for me.......btw......in the title is SW 2024 mentioned. But in the Video you're talking about an other Version! You should correct this!!
I followed the instructions, and the RealView Graphics option is now enabled in the menus, but turning it on or off does not actually change what is displaying. For example, a chrome sphere with RealView Graphics turned on still just looks matte and gray instead of mirroring the environment. Is this because the memory value used was not right for my graphics card?
For me, I had to create an additional key by my graphics card name in the Nvidia corporation folder as well and the hexadecimal values were 70008 for the NV40 folder and 4000000 for Nvidia corporation folder. commenting in hope to help someone.
I have solidWorks 2024 and Nvidia rtx 4090...I just followed your step and it works....first time.....incredible !! 🙂
great it works. By the way who have AMD graphics card create the new key in RV420 instead of NV40.
thanks for comment it solved my problem
Gracias me sirvió , Radeon RX 570 Series , 32408
THANK YOU!!! Worked first time with Solidworks 2024 and an AMD Radeon
I did not have to do this with SolidWorks 2023, the realview graphics just worked by default with my RTX 4080 Super. But when I upgraded to SolidWorks 2024 on the same computer with the same GPU, realview graphics was gone. This trick worked perfectly to bring it back, thank you so much!
Thank you so much, i just recently upgraded from 2022 to 2024 with a 3050 and i could not figure this out, i tried this and it worked so thank you so much.
Thanks, very welle explained. It worked first time!
SW2024 with Geforce RTX 4070 Works, Thank you!
THANK YOU SO MUCH MAN!!!!! super helpful
It worked straight away. Thank you very much! Thumbs up!
Working successfully, l have enabled real view graphics in SolidWorks, my graphic card is NVIDIA GeForce
I have new issue I can see the realview option but it has no effect on the view it same as before
@@nadeem8111 me too =(
Thank you!!!! after hours of researching graphics cards this is what did it! Thanks!
I just followed your steps. All good my friend, thank you.
In addition to adding the workaround key, you must enable "Enhanced graphics performance(requires SolidWorks restart)" and "Hardware accelerated silhouette edge" under the performance tab in the settings and scroll to the bottom.
thanks. worked for gtx 960m
it doesn't work with the card Intel(R) UHD Graphics
is there a way to make it work?
I have the same issue!
Con Solidworks 2024 me funcionó con el valor 31408. Buen vídeo, muchas gracias.
ThankYou I had AMD Radeon Graphics Card
Thanks a lot man,
It works with Nvidia rtx 4050
Best video. Right first time round. Thanks.
It worked!!!!!!!!!!!! thanks very much
THANK YOU Worked first time !!!
It works well with my RTX4080super card, thanks a lot!
I just applied in solidworks 2024 and it's working
Very nice sir
thank you, Fruitfull video .
Great video! Thanks.
This works, thanks!
So weldon sir
Worked for me sworks 2024 student
Thanls sir, it worked for me on SW2024
Thanks a lot maan..You deserve more subs
Worked perfectly first trial 😎
Thanks a lot! It worked first time
Worked great with amd xtx.
works in my sw24,
Thank you bro
Thanks so much I did the same thing . I get ok
thank u very much brother, you have done a great job
Спасибо. В SolidWorks 2024 тоже помогло.
Thank you works perfectly
Thanks, that worked fine! 👏
Thanks Man, huge help!
thanks it worked
Amazing! This Works!
Thanks, very helpful.
RTX3080 works a treat!!!
my graphics card is mx 450 but allowlist can't be found in registry ... how to solve it?
Thanks prabhuji
please help. the realview graphics has been enabled but there is no actual render effect on the 3D Model. If I use 31408, the model is grayed out. If I use 30008 or 30408, nothing is happening. My software is solidworks 2024 student edition. graphics card, NVIDIA GeForce GTX 1650 Ti/PCIe/SSE2. thanks for your help.
I have the same problem. Did you manage to solve it ?
I tried using 32408 but nothing happened
I initially had this problem. You must enable "Enhanced graphics performance(requires SolidWorks restart)" as well as "Hardware accelerated silhouette edge" under the performance tab in the settings and scroll to the bottom.
You're a Boss thanks a lot !!!
Thank You Man
Thanks !
It worked. thank you
Mines is an intel UHD graphics card ?
doesnt work :( its greyed out, and i tried all numbers
A lot of thanks Bro...
I have SW 2024 and a RTX 2080 and it doesn't work for me. 😞
It STILL doesn't work for me.......btw......in the title is SW 2024 mentioned. But in the Video you're talking about an other Version! You should correct this!!
Thank you so much!
Muchas gracias 😊
Bro you are AMAZING
Perfect RTX3080 laptop : it works just fine
thanks you saved me !!
I am using intel graphics card and it didn't work for me please
I followed the instructions, and the RealView Graphics option is now enabled in the menus, but turning it on or off does not actually change what is displaying. For example, a chrome sphere with RealView Graphics turned on still just looks matte and gray instead of mirroring the environment. Is this because the memory value used was not right for my graphics card?
Found the issue, also needed to add a key under NVIDIA Corporation to get it working
Please help me I have the same issue with Nvidia card
@@ryanclingman9053 How did you do ?
@@ryanclingman9053 You are a saint; had the exact same issue; now it works.
@@ryanclingman9053 How did you do ? The RealView are enable but not show me beatiful graphics.
Thank you Sir
For me, I had to create an additional key by my graphics card name in the Nvidia corporation folder as well and the hexadecimal values were 70008 for the NV40 folder and 4000000 for Nvidia corporation folder. commenting in hope to help someone.
The above info worked for Solidworks 2019 with Nvidia RTX 4060 graphics card.
not working in my 2018 version
thanks
Does it work with rtx 2050
thank you sir
Thank you.
Thanks , 👌🏻👌🏻
❤❤❤❤
thanks!!!
i have tried not working
😂😂😂
супер Дякую працює
not working 👎
you are fucking slowwwww. thank you by the way
It works, thanks!
Thank you, it works.
Thanks! it works !
Thank you!
To AMD Radeon graphics doesn't work. Thanks