TY for an excellent video. I am running through all your maintenance videos since I just got a 2nd hand Bravo. I used a flashlight and my phone camera to see the eye lol.
Hello: I have a tip for your way to calibrate the Needle: Tool/ Maintanence / Calibration. When you are there press the step back arrow. The Maschine will go automatic to needle one und down with the needle to the needle Plate. If you like to adjust, you do it like you did. Now you like to go to needle two just press the one step back arrow again. If there ist anything okay just push the button again (you dont have to lift the needle up), the needle goes up, to needle 3 and down in one move. That makes everything faster ;-) It´s not my way (i use a faster one) Just a tip Best regards from Bergen at Island Rügen (Germany)
HELLO, I HAVE 3 EMT 16 AND THE X CABLES LAST LESS THAN 1 YEAR. I CHANGE THEM STARTING FROM THE LEFT SIDE OF THE MACHINE, TO THE RIGHT. WHEN I PERFORM THE MAINTENANCE, I MAKE THE TENSION ADJUSTMENTS LITTLE AT A TIME BUT ON BOTH SIDES (BOTH NUTS). THE PULLEYS TURN PERFECTLY AND SHOW NO SIGNS OF DETERIORATION ON THEIR SEAT TRACKS. WHAT DETAIL COULD I BE OVERLOOKING? THE CABLES ARE CONSTANTLY STRETCHED UNTIL THE SHEATH BREAKS AND FINISHES BY DETERIORATING AND CUTTING THE CABLE.
@@MelcoEmbroidery thanks I was able to find the manual and converted it to USB. Maybe I’ll post a few videos about it once I get to know the machine a little better. Still runs good tho!!
Thank You so much! It helped to solve my current problems! A thankful Melco newbie from Germany.
TY for an excellent video. I am running through all your maintenance videos since I just got a 2nd hand Bravo. I used a flashlight and my phone camera to see the eye lol.
Glad it helped!
Learnt a lot from this lesson. New owner of a Melco Bravo in Germany. Having a number of issues and I think this will help.
Glad it helped!
Keep up the Videos, I love learning about my EMT 16 Plus. These are real helpful!
Thank you from Alaska.
Our pleasure!
Well this video just saved us, thank you so much.
Red and white Amaya machines don't have needle calibration. There are two sensors on the needle case that control needle centering.
Make more videos on technical
Hello: I have a tip for your way to calibrate the Needle: Tool/ Maintanence / Calibration. When you are there press the step back arrow. The Maschine will go automatic to needle one und down with the needle to the needle Plate. If you like to adjust, you do it like you did. Now you like to go to needle two just press the one step back arrow again. If there ist anything okay just push the button again (you dont have to lift the needle up), the needle goes up, to needle 3 and down in one move. That makes everything faster ;-)
It´s not my way (i use a faster one)
Just a tip
Best regards from Bergen at Island Rügen (Germany)
HELLO, I HAVE 3 EMT 16 AND THE X CABLES LAST LESS THAN 1 YEAR. I CHANGE THEM STARTING FROM THE LEFT SIDE OF THE MACHINE, TO THE RIGHT. WHEN I PERFORM THE MAINTENANCE, I MAKE THE TENSION ADJUSTMENTS LITTLE AT A TIME BUT ON BOTH SIDES (BOTH NUTS). THE PULLEYS TURN PERFECTLY AND SHOW NO SIGNS OF DETERIORATION ON THEIR SEAT TRACKS. WHAT DETAIL COULD I BE OVERLOOKING? THE CABLES ARE CONSTANTLY STRETCHED UNTIL THE SHEATH BREAKS AND FINISHES BY DETERIORATING AND CUTTING THE CABLE.
Please reach out to technical support.
melco.zendesk.com/hc/en-us/articles/202857595-Contacting-Melco-Warranty-Technical-Support
why my bottom center s not show 180 so tht needle breaks and z axes errors
These machines are no good. All three of my macbines are broken. My machine with the highest sticyh count is 6 million stitches. Incredible
How much can you move the needle box to the right or left 1 mm ?
we have a Red & White Amaya so where do I find needle calibration?
what if the needle calibration will not save?
If the needle calibration is not saving then I would suggest you call Melco Tech Support:
After select get table to save the information, do I have to select set table too?
No, you do not have to set table.
Anyone know where I can find information and tutorials or classes on legacy machines? Specifically EMT 10T.
We have the manual online at melco-service.com. That machine was discontinued in 2001 so videos will be hard to find.
@@MelcoEmbroidery thanks I was able to find the manual and converted it to USB. Maybe I’ll post a few videos about it once I get to know the machine a little better. Still runs good tho!!
How to get to Melco os Flex ?