I ordered an extra hook and blade. Had a couple of needle breaks and could not get the bobbin to catch the upper thread consistently. After taking the original hook off and comparing the blade....it was the blade but not having this problem before I did not really know what to look at on the blade. Put the whole new hook on the machine and running great! I watch, stop and do the procedure, then watch some more. EXCELLENT video. Thank you! Now some snowy day I will put that extra blade on the original hook and give it a test.
Hello Bob, The XTS hook replacement is not something we suggest a customer does. There is instructions on this in the tech. manual for the XTS. Here is the link to the tech manual for the XTS: melco-service.com/docs/XT_Tech_Manual/Technical.htm
I ordered an extra hook and blade. Had a couple of needle breaks and could not get the bobbin to catch the upper thread consistently. After taking the original hook off and comparing the blade....it was the blade but not having this problem before I did not really know what to look at on the blade. Put the whole new hook on the machine and running great! I watch, stop and do the procedure, then watch some more. EXCELLENT video. Thank you!
Now some snowy day I will put that extra blade on the original hook and give it a test.
Very Welcome!!
I just installed a new cutter blade. Everything worked out fine. Your video helped a lot to understand everything correctly. Thank you!
HI Chris? Can you show video for XTS model hook replace too?
Hello Bob, The XTS hook replacement is not something we suggest a customer does. There is instructions on this in the tech. manual for the XTS. Here is the link to the tech manual for the XTS: melco-service.com/docs/XT_Tech_Manual/Technical.htm
Thanks, ;-)
Whoever is speaking off camera should have a microphone or speak louder as some of what he says isn't distinguishable.