How to start fiber cement siding with a metal flashing
Вставка
- Опубліковано 4 жов 2024
- When getting into custom building, you really don't ever do the same thing twice. So you learn along the way to figure out different ways of doing things for unique situations. Like this video as an example, I don't always start my siding off on a transition 1x, but since I am using it as a starting point for my brick patio this will be (IMO) the cleanest look.
The standard type flashing for a horizontal transition for a wall would be a Z flashing. Which is a piece of flashing that looks similar to a Z. This prevents the water traveling down the side of the exterior siding to leak in-behind whatever it is setting on and the water will continue to flow over and out onto the siding below it. Nothing complicated, just a necessity. I used a standard gauge aluminum painted coil stock and used the brake to bend it. I prefer to hem my exposed edges for a cleaner look, and it also adds a little rigidness to the piece too.
As for the side where I didn't start off the siding on the 1x, I used the metal flashing only.... that was a unique situation as well. Instead of using a ripped piece of siding for my starter pitch, I simply used the dimple board to offset my siding for the proper pitch. I have a couple of videos posted leading up to WHY I had to use a dimple board on this project. Links below
Major Termite and Water damage - • Major Termite & water ...
Waterproofing the Pool house - • Waterproofing the pool...
#fibercement #zflashing #siding
This is not a sponsored video. These are the products that I have chosen for the best results possible for this particular project. But, if anyone would like to sponsor W.K.D. Construction to use their products...then by all means, contact me! If I use a certain product, it's for a good reason. I stand behind all of my work and the products I install.
Product links used in this video:
Tapco aluminum brake - tapcotools.com
James Hardie siding - jameshardie.com
Zip tape - huberwood.com
OSI caulking - ositough.com
Incredibly helpful! Thank you!
Glad it was helpful and thanks for watching
Great job 👍🏻 you’re an excellent contractor
Wow, thank you
Good idea, no water getting in there, nice job.
You got that right!
Are there no prefab options to buy for this instead of making them?
Why are you using screws?! So slow 🐌 coil siding nailer! Works so well
I’ve got one, this was detailed work and screws worked perfectly. I’m not in a race
Isn't aluminum no supposed to be used because it reacts with the cement? It's so hard to find a straight answer on this topic.
If it was raw cement aluminum can degrade it some (takes many years to do so) but this is all primed with paint…so there is no concrete to aluminum contact.
I have fiber cement siding on my home. Flashing wasn't installed on the butt joins, some were caulked and some weren't. Is there a solution to flash these butt joints after it's installed? Thanks
You might can sneak a pc of metal flashing under each seam and apply a small bead of silicone on the back side of the flashing? If it’s blind nailed it will probably work, if face nailed you may be out of luck?
What kinda screws did you use in the video
1.5” Coated deck screw
What kind of brake is that?
Tapco 12’