How To Lower Your Silverado/Sierra 2019 2020 2021 3/6 4/6 5/7
Вставка
- Опубліковано 2 лип 2024
- Welcome to a new video from Proyectos Los Carnales here to help with the mamalona. Today we go over how to lower/drop your 2019-2021 Silverado or Sierra. For a new truck out in the market it looks gorgeous with any modifications and what can look better than a dropped truck with nice wheels. We go over the installation process and steps on a Belltech kit that is meant to be a 4 inch front drop and 6 inch rear drop.
IG @plcbuilds
2019 2020 2021 Silverado Sierra 20s 22s 24s Dropped Lowered Belltech - Авто та транспорт
Great video guys. Love the way how you guys explained everything bit by bit.
Thats a lot of work!!! Great Job.
That truck is 🔥🔥🔥
Awesome thank you, going to drop mine now. So much good info.
Nice e homie thanks cause u got a 2020 rst came lowered i saw the belltech name on front strut but didn't know what else to look for. Now i know a lil more to see how low im riding...im find you on the gram...great vid !
Fire video guys keep it going!!
Awesome video!
Just seeing this videos makes me wanna buy the same truck, just to lower it my self
Damn, that's beautiful!
Great video.
Thank you
So now it's officially called ST instead of RST. Nice job 👍
Great job
Great video fellas!! Thank you so much for the detailed video. How does it compare to the smooth factory ride that all of the GM trucks come with? I love the ride my 21 has but want to drop mine as well.
Thanks again!
Also if u don’t use the spindle and just use the adjustable strut you will have hella camber even after allingment. I just did mine with a 4” drop strit and now Ima go back add rings then put the spindle to take away my camber
Love the video homie ! Question would that drop clear 24s
great video
Chulada papá 😌
Gracias!
WOW! Thanks for share....I have a Chevy 2020, the prices are so high, maybe I will not buy another one and will do a new version...sure a LOWER.
Okay I just dumped out my ‘23 with the same kit.. except I used just the smallest ring to drop it 5.5” in front and 7 in rear. But I see it on this truck as well as mine.. the passenger rear tire pokes out and the driver rear wheel is sunk in some, so I measured the inside of the wheel to the frame on both sides and the passenger side was 6-5/8” and driver was 6”.. so to even it out have to loosen all the u bolts and try to slide the axle to the driver side 5/16”.. hopefully it will move that far without having to modify pins and shit
Clean
That's dope.. What is the lowest you can go with out a c notch?
Does this kit work with the 2.7T? Love the video carnal, well detailed along the process. looks and sits beautiful!
Thanks and the kit should work the specs just ask for a 2wd or 4x4 which would make the kit different it does not mention the engine sizes
Can you do a 5/7 drop on a 4 wheel drive
Good narration👍🏾
What do you recommend for top control arms
Hi Do you guys work on other vehicles than yours I have a 2018 Silverado that is lowered but has a issue
Any Problems with the front turning Ratio ?
what’s the issue with the control arms ?
anything for a 2022 cusotm?
What do yiu need upwr control arms for ?
How do I do the 4/6 setting
Warrenty still good?
Hey bro funcionara para una 2023 gmc elevation
What control arms did you go with?
What kind of exhaust does it have ?
It is necessary to cut the chassis. Greetings from Florida
What size wheels are on the truck?
Y’all didn’t cut the frame righ ?
why u getting new control arms ?
What size tires???
Ey primo donde radican qiero vajar una 2022 silverado
I saw you at felibertos
New follower. Where are ya located at. And do ya do work on other peoples truck
En cuanto salió todo eso, y cuanto cobrarías la mano de obra?
#DOPESHOW
I have a question. I thought the belltech kit was a 4/6. I didn’t know you can make it a 5/7? Also how is the ride? My 21 RST is a daily driver. With the 3.0 duramax.
7” is obtained by leaving the stock shackles on I believe I’m not sure on the front though
Cuanto curtain un kale as tengo una 2019 silverado
Iam n Houston Texas where are you my truck drop it hits all away round do I need to remove my bump stop
Donde están ubicados ustedes
Hey I got same truck same drop kit and did a 4/6 but didn’t do a c notch and it hits reallly bad on the bed what do you recommend I get .Some helper bags ??
They recommend the helper bag kit when it’s the 5 inch rear drop you would just have to install the lift shackles that come in the kit and added with the bags it’ll help not bottom out
Hi guys would you be interested in doing a side job like the one ur doing i have a 2020 Silverado
3/5 for 2022 duramax 2500hd?am I the only person on the planet that doesn’t want a truck that high
I lowered mine and know from stop to 30 it sounds like a weird rubbing under the floor, someone has experienced the same?
hey man - awsum video -
where u located at ? … ( city ) .
How much this work cost?
is it required to c notch for drive shaft clearance on a 4x4 2020? 4/6 drop.
You can use a helper bag kit to keep you from bottoming out where the frame would be hitting the differential I know IHC suspension sells the kit with the helper air bag instead of the c-notch
Awesome videos bro, by any chance have you done a 2021 gmc sierra 1500 denali crew cab with magni ride suspension i wanna do a 3/5 from ihc thanks in advance keep up the awesome content!🤙
have not done one with the mangi ride but if you run the ihc kit it'll come with everything you need to plug it in and make it work and thanks!
Thank you for the reply bro!🤙
Are u guys in florida
Bro I have a question what kit should I buy online for a 4/6drop for my rst 2020 chevy silverado ?
Belltech or IHC suspension make great kits for your truck
What tire size are you using look badasss
the truck is running 22s with this drop and no rubbing
Aye Bro FR Why don't you do my Truck 21 Ram .
Can you lower my truck? I got the same truck 2020 silverado
Good 👍 video for sure got a like from me , but I got 26 on a 2010 silverado can I due a 5 7 drop on mine lmk. right now my truck is leveled que dice
Thanks! You should be able to we had a nnbs with a 4/6 on 28s no rubbing on the rear just adjustments to the fender in the front to clear turning radius so a 5/7 with 26s should be fine
2004 Chevy 4x4
Would you guys consider coming to Colorado and help me on my truck?
Ases esos trabajos ? Tengo un Silverado 2020
Yeah bro how u got a 7 did u use the stock chackles or u didn’t use none I have a 19 and have a 4/6
Kept stock shackles instead of using the 1 inch lift shackles for the rear
How can I get in touch with you guys?
Hi there, just bought a 2021 RST from the dealer and it already came lowered. Don’t have no info on the lowering but I have an issue. It vibrates when it rides. Would you be able to narrow it down for me in what that issue could be? And thanks in advance.
Double check you have the right transmission mount because a new one comes in the kit that is supposed to be used
I will do that, and get back to you on that. Appreciate the quick response. By the way! Great videos 👌🏼
Did you get rid of the vibration? Having the same problem, thinking of going back to stock height.
Cuánto cuesta bajar una camioneta así
How do you get the 7 on the back?
Just keep the stock shackle in instead of the 1” lift shackle.
What drop kit did you use ?
Did you watch the video at all? Lmao
Did you have a noise from the driveshaft after?
My case now, did you solve it?
Let me know please
🎉🎉 🎄4
Cuanto cobras por un kale asi
What size wheel and tires?
They are 22 inch rims not sure on tire size
@@proyectosloscarnales4512 Hey if I have the IHC 3 and 5 What would I need to make it a 5 and 7?
For the rear you can remove the lift shackles and install stock/lowering ones and do a c-notch. For the front add a lowering strut or spindle since it comes with lowering control arms.
Is there any way to achieve 5/7 drop on 2020 Silverado without having issues ??? Anyone??
IHC upper control arms to fix alignment
@@proyectosloscarnales4512 I already have 4/6 belltech drop I wanna achieve 5/7. What I need to do? Thnx man
@@proyectosloscarnales4512 I have the ihc control arms and I have the Belltech coil overs and the spindles. How do I combine the components to get a smooth ride
Why do they call him canica?
Does he like marbles?
Just picked this truck up is there anyway u can give me the previous owners contact info
I’m the previous owner
Q pedo loco como bajo 3” trasera una gmc 2024
What size tires? Not the wheels, what size are the rubber things around the wheels? 😂
Are you guys in az?
What's up man I need some work done
I knw y they call him canica,
Ora respeta
Me encantan las mujeres latinas de ciento cincuenta kilos con Tapaingus del tamaño de Júpiter.
What a waste, unsub