How to Replace Alternator 2003-2011 Honda Element
Вставка
- Опубліковано 29 сер 2024
- Buy Now!
New Alternator from 1AAuto.com 1aau.to/ic/1AEA...
This video shows you how to install an alternator on your 2003-2011 Honda Element. The alternator in your vehicle powers the battery and electrical system while the engine is running. If your alternator is failing, you may wind up with a constantly draining battery.
This process should be similar on the following vehicles:
2003 Honda Element
2004 Honda Element
2005 Honda Element
2006 Honda Element
2007 Honda Element
2008 Honda Element
2009 Honda Element
2010 Honda Element
2011 Honda Element
Tools you will need:
• Pry Bar 1aau.to/oMQ/1AX...
• 10mm Wrench 1aau.to/oQF/1AX...
• 10mm Socket 1aau.to/oaWp/1A...
• 12mm Socket 1aau.to/obeX/1A...
• 14mm Socket 1aau.to/obeX/1A...
• 19mm Socket 1aau.to/o8Q/1AX...
• 8mm Socket 1aau.to/oaWp/1A...
• Serpentine Belt Tensioner Tool 1aau.to/ocy/1AX...
• Locking Pliers 1aau.to/ojF/1AX...
• Needle nose pliers 1aau.to/oAi/1AX...
• Needle nose pliers 1aau.to/oAi/1AX...
• Torque Wrench 1aau.to/oauj/1A...
• Gloves 1aau.to/oK6/1AX...
• Safety Glasses 1aau.to/oEB/1AX...
• Wire Ties
• Funnel 1aau.to/ogJ/1AX...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
There is absolutely no need to take hoses or pully off the power steering pump. Merely unbolt power steering pump with hoses attached. Also no need to mess with the tensioner pully assembly other than to remove serpentine belt. Once electric fan is out of the way there is full access to the alternater.
I just replaced the alternator, belt tensioner, and belt yesterday and i didn't have to pull any lines for the power steering. I unbolted it and just laid it back across the top of the valve cover. This was a 2005 i was working on.
I hope people read the comments before working on their element. There is no need to undo the power steering lines or remove pulley, just flip it all back. Don’t remove the fan either, just shift it a couple inches to drivers side. This job can be don’t in maybe 1/4 of the time it took you. 😅
After doing this job ot seems pretty insane to disconnect hoses and pulleys on the power steering pump. Just unbolt it and place it out of your way.
Thank you so much I just did my alternator with your video side-by-side probably one of the best videos of ever seen if it wasn’t for you, I’d be dead. Thank you so much.
The vid is for changing out the alternator. He acts like part of that process is to replace the tensioner for a new one. Is that right? If you ever pull out the tensioner, you automatically HAVE to toss it and put in a new one? Why not put the old one back in?
Yeah man, this guy made all look little difficult
I guess this guy likes to do a lot of extra work...just unbolt the power steering pump and set it aside. I recently did this myself
Are those two bolts on the bottom of the alternator different lengths? I have two bolts left at the end and they are different lengths. I'm not talking about the top bolt that is like three times as long. The bottom two are about 1/2" different in length. Which side does the long one go on?
Awesome video. Effective communicating! Thank you!
After the 5th “now you gotta take this off” my nerves starting scrambling 🤣 half of it seems useless other than for more room to use deep sockets on every bolt
Great video, great channel.
So, just pulled my passenger side fan out, as per the video. I yanked some wire from somewhere attached to the bottom of the housing. Not sure what it goes to, it is a single blue wire harness, male to female disconnect (busted because I just pulled it up and out like the video). I can not find anything about it anywhere on the internet...So I disconnected the power on the top of the fan as shown in the video, yanked it up and out, and have this stray blue wire attached to the bottom harness clips. No way I can reach down there to reconnect it, hope its not important!
This is the most overly complicated video on this subject. The power steering pump can be removed with two bolts without disrupting the fluid. DO NOT FOLLOW THIS VIDEO
Супер. Отличное видео. Последовательно и понятно. Респект дружище.
😵💫 a reminder of what type of car not to get. 😲🧰