No one can seem to answer this. I think the real answer is "use tiny drill bit to drill a bunch of exploratory holes in the vicinity, then use 3/8" bit to drill the real hole on-center."
Not working for the 24 model! They welded the bolt to the inner pipe, you can remove the whole back tip by drilling al the rivets in the back and then you can reach the bolt
@@stipple703 im from Europe too, Slovakia, very small country, I uphraded my headers for full akrapovic system, but I want to delete db killer, its 2024 model 😳
@@stipple703 but if screw is welded, what I can do ? Nothing, maybe permanently cut it, but I was considering to keep db killer, for longer dostances maybe
Preguntó que diámetro de broca utilizaste. El tapón de goma se compra en tienda o por Aliexpress??.. se puede limpiar con gasolina el interior del silenciador o punta para ayudar a descarbonizar?? Gracias, saludos desde Buenos Aires Argentina !
Not true wut so ever. U can run straight pipe just the same and ur bike will be just fine. Even My neighbor has had a zx10 for a few years running straight pipe and his bikes just fine. It’s a myth
@@Aries-us9cydepends, most modern bikes shouldn’t have any issues but my ZX9R doesn’t like being straight piped, being carbureted it seems to bog when i hit the highway. No issues otherwise.
I drilled a 13mm hole to expose the bolt after using a thin piece of card slid between the can and pipe to line up the bolt easy 😊
As you can see, by removing dB killer your bike will turn from green to red 😂 too bad dude
Even tha exhaust changed fron full carbon to tip carbon only
Some of them you to drill out the pop rivets remove end part of the carbon fibre because the bolt is welded to the exhaust
You just magically had the drill spot and was able to break the spot weld through that hole??
Where'd you get the plug from?
How do you know were to drill the hole
No one can seem to answer this. I think the real answer is "use tiny drill bit to drill a bunch of exploratory holes in the vicinity, then use 3/8" bit to drill the real hole on-center."
0:16 the driller made dodge hellcat noises💀
Did mine Last night easy enough job
you guys think that this will also work with the akrapovic S-Y7R11-HAPT ?
Is it the same way on xadv 750 2023? Akrapovic
where i can find that small hole rubber cover
je cherche aussi 😢😢😢
A me me parono due marmitte differenti, pure la moto da verde diventa rossa 😂
Not working for the 24 model! They welded the bolt to the inner pipe, you can remove the whole back tip by drilling al the rivets in the back and then you can reach the bolt
Are you serious ? So I cannot do this in 2024 model ?
@@YAAQOV_JJ in Belgium (Europe) models NO, you can but it’s a bit more difficult 😎
@@stipple703 im from Europe too, Slovakia, very small country, I uphraded my headers for full akrapovic system, but I want to delete db killer, its 2024 model 😳
@@YAAQOV_JJ yeah so like I said, easiest way is to drill the rivets out of the top piece, then you can get the tip of to reach the small bolt.
@@stipple703 but if screw is welded, what I can do ? Nothing, maybe permanently cut it, but I was considering to keep db killer, for longer dostances maybe
Fällt ja gar nicht auf 🤦🏻♂️🤦🏻♂️🤦🏻♂️🤦🏻♂️
C est exactement ce que j ai fait sur ma z1000r de 2018... l embêtant s est toujours de bien récupérer la visse...😂
Bonjour, on est obligé de faire comme ça pour enlever la chicane de ce modèle ?
@@cwar_liberty3542 si on veut l enlever, c est ce qui est le plus propre...
What size drill bit was that? And was it hss metal or wood bit?
???
Preguntó que diámetro de broca utilizaste. El tapón de goma se compra en tienda o por Aliexpress??.. se puede limpiar con gasolina el interior del silenciador o punta para ayudar a descarbonizar?? Gracias, saludos desde Buenos Aires Argentina !
You gotta be fucking kidding me. I'm glad I didn't order it.
the bolt is now welded onone point, so it doesnt work anymore!!!
Where is it now
@@igbrmjoshua same position but welded. You need a dremel Tool
Was not weldet for me.
That's not the correct way to do it ... best way is to drill out the rivets and pulling the exhaust appart
😂😂c’est pas le même pot du début de la vidéo 😂
Oui mdr',on passe d'un Z900 à un z1000 😂
dont remove db killer it will damage your bike
Not true wut so ever. U can run straight pipe just the same and ur bike will be just fine. Even My neighbor has had a zx10 for a few years running straight pipe and his bikes just fine. It’s a myth
It will not.
@@Aries-us9cydepends, most modern bikes shouldn’t have any issues but my ZX9R doesn’t like being straight piped, being carbureted it seems to bog when i hit the highway. No issues otherwise.
It will damage your ears 😂
Not if you tune it right