HD Pan America Barkbuster hand guards install
Вставка
- Опубліковано 29 лип 2024
- Installing the new Barkbuster handguards on my Harley Davidson Pan America.
Like my content and want to say thanks? You can buy me a coffee.
www.buymeacoffee.com/mikesmot... - Авто та транспорт
Thanks for another idea for my Pan America! Iike the quality of your installation videos. Gives me confidence to try it myself.
I had no idea these were this easy to install. I think I will order them right away. Also, you've got a new subscriber. Thanks for posting this.
Thanks Mike for another "How to" video. Just received my Barkbuster kit.
Finally somebody installing a proper hand guard. Thank you!!!
Mike - Great videos! Thanks for taking the time to make it.
Loved the tips, especially using the smartphone level app to dial in the same angle on each side.
Ride safe!
Just got mine on today 😁
Great install video. I've always like barkbuster for the protection they provide to the controls.
I just installed mine on my 22 Pan America, this video was wonderful, thank you, thank you, thank you
Glad it helped.
Thanks for making these videos, they are a big help.
Thanks for the video, made it so easy to install today.
Enjoying the videos, really helpful for me and my Pan
thanks for the video
Great video! Keep em coming!
New subscriber, great video! This gives me a Shadetree Mechanic vibe...brings back memories!👍👍👍
Nice job MIke!
I will definitely do that on mine!! tx
The best instruction and test vids! The guards look very sturdy, but they must be the ugliest as well... ;-) Why do you still not have a few thousand subscribers.....?
"Why do you still not have a few thousand subscribers.....?" .. because I don't have time to crank out new videos every week :)
donde puedo comprar ese articulo, gracias
Thanks for the great video, just order up the bark busters. I see you have a 15 litter Givi top case mounted up. What brand rear rack did you use and do you like it?
Thank You
That’s a Givi 30L Domoliti top box on the Givi rear rack. I like it, it’s a nice everyday size and I now have Mosko Backcountry side bags for when I need more space.
Great Video Mike!! Where did you find your Barkbusters? I can only find "universal fit" guards at websites like Revzilla and Twisted Throttle....
pacificpowersports.com had them in stock at the time I ordered mine.
Thanks for the video. Where did you get your barkbuster kit? There's so many different models, can you provide a link? Thanks
pacificpowersports.com/shop/barkbusters-bike-specific-hardware-kit-for-harley-davidson/
Any chance you could give a link to the set of bark busters you installed here, all I'm finding is a one size fits all kit that looks nothing like this kit, thanks.
pacificpowersports.com/shop/barkbusters-bike-specific-hardware-kit-for-harley-davidson/
Great ost. Can you send a link for the kit. Thanks
pacificpowersports.com/shop/barkbusters-bike-specific-hardware-kit-for-harley-davidson/
Have you had any issues with the LH Barkbuster clamp hitting the windscreen height adjustment lever in any of its positions? It looks like it could get real close or interfere at full lock turning to the right.
With stock handlebar risers I can see it being an issue, not so much the lever but perhaps touching the windscreen.But I have pullback risers so I have plenty of room.
That makes sense with a riser giving more clearance. I am tall (6'1") so I can reach stock handlebars easy enough.
Damn I wish you showed them at full lock to see how the windscreen lever interfered. I haven't bought them yet because they say this on the web. "Due to the design of the bike, this hardware kit may touch the windscreen or the windscreen adjustment lever at full lock.
Interference can be minimized by adjusting the height of the screen. The preferred windscreen position is fully up or fully down." I use full down and second to last. So does it interfere?
In my case there is a ton of room since I have pull back risers. With stock risers I don’t know how close they may be.
@@MikesMotorbikeChannel ah makes sense
Just installed mine. They do interfere with the windscreen lever unless you have it all the way down or all the way up. I almost always run my windscreen at the second from the top position so this is a problem. The bar clamps also hit the plastic center tank trim at full lock. Probably not the best option if you are running stock risers.
@@O-Fubeca Thanks for your reply. Good to know.
Mike how are you getting on will them..I’m about to pull the trigger on them Just interested if there are any issues will them..is there enough room if you have winter gloves on , any good while out in the rain ect ect Appreciate your thoughts buddy
No issues with winter gloves for me, but I’m only a size medium. Since this video I’ve swapped out to the larger Storm guards which swap out with just a few screws. They offer better coverage for colder weather. I’ll put the Jet guards back on once the weather warms up again.
Bark Busters says they may touch the wind screen at full lock, but since I have risers that bring the bars back, I have no issues with that at all.
Mike thanks for the reply buddy really appreciate it,sound advice as always thank you buddy
All fitted now and very pleased with them,went with the white guards and they not only look good but keep the chill/rain off my hands..thanks Mike
So I gotta ask.... have you had to deal with any "new model" issues?
anecdotal facebook and forum Research shows a few folks have been having a hard time with their machines
Two issues so far... one of the tabs on exhaust that hold the heat shield on broke after 8K miles, dealer has ordered a replacement exhaust header that addresses that. The 21s have thinner mounting tabs than the 22.. for now I have safety wire securing it.
The second is the common issue of failing to start on first button push. There is an updated starter clutch that addresses that, but I've not made it in to my dealer yet for that.
Been running smooth otherwise. No warning lights, no limp mode, etc..
Unfortunately I know all to well what happens when these PA's fall over in gravel and soft sand, dumped mine in some soft sand at slow speed, $1800 later it needed new handlebars, upper and lower triple clamps and neck bearings, was pretty impressed with the bike before the tip over, afterwards I can't get over just how un durable these things are, great for the pavement, a wallet drainer in the dirt.
Wow! quite a spendy drop indeed.
Olá amigo muito bom trabalho, tem um número de watts zap, falo aqui do Brazil
What is the model number for these Barkbuster Hand Guards for the PAS 1250?
Are they the universal fit, or model specific? I have been on Revzilla and Twisted Throttle and can’t seem to find anything specific for the pan, only universal fit. Any help would be appreciated, thanks 😎🇺🇸
pacificpowersports.com/shop/barkbusters-bike-specific-hardware-kit-for-harley-davidson/
@@MikesMotorbikeChannel wow, thanks, about to order them!