As a Marine I really appreciate your attention to detail. Excellent video and great tips on how to get the critical parts cleaned and lubed properly. Take care of you gear and it will take care of you. I just picked up an SC (first dive into 9mm) so it was nice to see someone who has taken this specific weapon apart. Well done and thank you for taking the time to do this video. Semper Fidelis
This is the most helpful tutorial I've watched for cleaning this Canik. It's clear and concise. Though many times overlooked, your lighting is especially helpful with showing the specific parts of which you speak. Thank you for putting this together!
Super helpful man. I just recently bought a Canik Tp9 sc elite in the dark tan color. Never cleaned it even though i went through a bucket of ammunition. I cleaned it now it shoots better than when I bought it!!
This was so helpful. I never opened up my Canik before. I have shot probably 200-300 rounds through it. Such a great video to help me and walk me through everything. Thank you!
Good informative video and it shows that you are a veteran at this. cleaning after 500 rounds, I never thought, I have cleaned a gun in years I hadn't thought that you could go that long without a cleaning. I use to clean them after each use at the range. Thanks for the video. Keep up the good work!
Thank you, thank you, thank you I've seen a lot of reviews on this Canik but this is the first that was so on point i have a Canik TP9 SF Elite i have about 250 rounds through it i really appreciate you teaching us all how to properly clean it.
Great job!! I'm not a Gun Guy, but my job requires me to carry. Your video was very helpful! Being that I've never cleaned my gun before, your video was very helpful.
This helped a lot! Thank you so much. I didn't wanna mess it up trying to clean it. I have the Canik TP9 SF Elite-S series. I appreciate the tutorial. ❤
Thanks! After this video I bought a full gun pick kits in a hard case. I used the typical Hoppe’s stuff for many years but just got into using Clenzoil products. My gun is so new I only ran 20 rounds through it as ammo is crazy expensive anymore. I enjoyed your video.
You simply push the bottom pin in the base in with a pointed object and then slide the base off. The spring and follower will come out so you can clean everything.
really awesome and helpful video as i just got my sc elite. I followed the video during my first cleaning and it came out looking even better than brand new!
hey great video... just one question, the canik comes with barrel brush but it doesn't disconnect like yours is it ok to push and pull back and forth or should I go buy the ones that disconnect to only follow the bullet travel? thanks n advance appreciate ur help....
Hello, my Canik is slightly rusty.. Mostly just the pins , and a LITTLE internal rust. Is it worth taking it to a gunsmith or should I just buy a new gun?
For an Armourer, yes mobil oil is Economical. But mobil oil is Not Rust/Corrosion resistant. To increase the Properties, Mix Mobil Oil (5w20) 40%, ATF 40%, Grease No.2 (Abro Rust/Oxidation Preventive) 20%.
Automatic Transmission Fluid is Rust/Corrosion Resistant, Anti Chipping properties, Carbon Remover and won't gum. You can have Excellent mixture by mixing; ATF (80%) and Grease (No.2, Rust & Corrosion Preventive, 20%). For Barrel cleaning, use only ATF, which have very good Carbon Removing properties.
Do not watch any other canik tutorials unless they come from this guy this guy knows what he doing
I'm new to gun ownership and just purchased a TP9 Elite SC. This video was very helpful. Thanks!
As a Marine I really appreciate your attention to detail. Excellent video and great tips on how to get the critical parts cleaned and lubed properly. Take care of you gear and it will take care of you. I just picked up an SC (first dive into 9mm) so it was nice to see someone who has taken this specific weapon apart. Well done and thank you for taking the time to do this video. Semper Fidelis
Do you eat crayons? What about paint?
@@Dave-gu3zj Nope, but thanks for asking, quit that a long time ago ;-)
@@USMC-ce2ekI think he’s saying HE eats crayons and sniffs paint, lol he’s an idiot
This is the most helpful tutorial I've watched for cleaning this Canik. It's clear and concise. Though many times overlooked, your lighting is especially helpful with showing the specific parts of which you speak. Thank you for putting this together!
No need to watch any other Canik handgun cleaning video after watching this. Very well explained. Keep it up bro.
Excellent tutorial. Good camera angle, good lighting, on point without swagger or nonsense.
Super helpful man. I just recently bought a Canik Tp9 sc elite in the dark tan color. Never cleaned it even though i went through a bucket of ammunition. I cleaned it now it shoots better than when I bought it!!
Yeah I found that once I wore away the factory oil, gave her a good cleanin, she ran like butter. Amazin. Recently got a viper vortex mos as well.
Just purchased my first Canik, and this was super helpful. Thank you!
This was so helpful. I never opened up my Canik before. I have shot probably 200-300 rounds through it. Such a great video to help me and walk me through everything. Thank you!
Good informative video and it shows that you are a veteran at this. cleaning after 500 rounds, I never thought, I have cleaned a gun in years I hadn't thought that you could go that long without a cleaning. I use to clean them after each use at the range. Thanks for the video. Keep up the good work!
Just got one and...genuinely appreciate the bit about what places to oil. Going to give it a bit before I run it the first time.
Thanks for walking me through the steps for this particular!
Thank you, thank you, thank you I've seen a lot of reviews on this Canik but this is the first that was so on point i have a Canik TP9 SF Elite i have about 250 rounds through it i really appreciate you teaching us all how to properly clean it.
Great job! You have shown me how to clean mine without missing a beat! Thanks!
Great job!! I'm not a Gun Guy, but my job requires me to carry. Your video was very helpful! Being that I've never cleaned my gun before, your video was very helpful.
This helped a lot! Thank you so much. I didn't wanna mess it up trying to clean it. I have the Canik TP9 SF Elite-S series. I appreciate the tutorial. ❤
Real good video. Detailed. Well shot. Not too long. Appreciate it. Thank You.
Just cleaned mine using this detailed video. Thank you.
Thanks I just bought the same gun and I cleaned it for the first time after putting rounds through it and thanks for the video tutorial
Thanks! After this video I bought a full gun pick kits in a hard case. I used the typical Hoppe’s stuff for many years but just got into using Clenzoil products. My gun is so new I only ran 20 rounds through it as ammo is crazy expensive anymore. I enjoyed your video.
Great video got a thousand rounds through mine with zero malfunctions will start oiling it in those specific places though haven't noticed any wear
This is extremely helpful. I appreciate a lot man...
Thank you brother, straight to the point and didnt miss a step.
Very well done video and happened to be on my new pistol too.
Thanks for the video!
Great review! I will be cleaning my Canik tomorrow! Liked subscribed!
Excellent review. Can you also review how to take down the magazine to clean it. Thanks again
You simply push the bottom pin in the base in with a pointed object and then slide the base off. The spring and follower will come out so you can clean everything.
You don't have to pull the trigger to get the slide off. If its cocked you do.. it won't come off if its cocked.. but not simultaneously.
Great Video...Straight to the point...Thanks!
Thanks for the video. Really helpful and informative.
really awesome and helpful video as i just got my sc elite. I followed the video during my first cleaning and it came out looking even better than brand new!
Thanks for the video, I watch it every time I clean my Canik. Very helpful tips 👌.
Should we clean the canik out the box from purchase it says to clean off any extra oil does it even matter?
hey great video... just one question, the canik comes with barrel brush but it doesn't disconnect like yours is it ok to push and pull back and forth or should I go buy the ones that disconnect to only follow the bullet travel? thanks n advance appreciate ur help....
Borebrush with the patch...good idea
Great job!!
What ammo do you use for the canick sc I hear + p 147 gr is good for when your braking it in 115 gr tends to jam it??
Thank you your an amazing technician
Thanks for the video Exactly what I needed to know
Thank you for this super helpful video!!
Thank you
Outstanding, thank you!
Bro you striker indicater is huge...looked like it was the size of a pea. 20:13
Hello, my Canik is slightly rusty.. Mostly just the pins , and a LITTLE internal rust. Is it worth taking it to a gunsmith or should I just buy a new gun?
Scrub those rusty parts and oil them. You should be fine unless you start seeing problems with function.
#Canik gang💪
Be careful with the trigger bar tbats a big tip I can give you. Honestly this guns internals are delicate.
Yeah, a lot more delicate than my H&K USP (too big for CCW)
I appreciate this thank you
Help the slide on mine wasn’t flush when I put it back on
Puppy training pads work good too....i guess you could used a diaper if you wanted
Would cleaning the tp9 elite combat be the same as this pretty much? Just got the elite combat!
Yep
It’s a Turkish gun. Canik is pronounced Janik I believe
Hate with strikers that you have to pull the trigger to clean them.
Great 👍
No oil on the trigger spring or Sear ?
You can, but it’s not needed
Have you had any failures to fire with your sc?
You won’t. It’s a great firearm
I can only speak for my experience but I had 2 Jams early on but nothing after the first 100 shots were broken in.
Idk why but you remind me of Barry from that HBO show “Barry”
Great video! Just not the one to watch for a quick breakdown. Lol
You mentioned more tools than came included in the box. I'm not using anything that didn't come with my Canick to clean it. Sorry.
i’ve heard that motor oil is a good lube is this true
Yes. I believe a lot of people use 0W-20 or 0W-30. Might want to do some research though. I know it’s a really thin oil
For an Armourer, yes mobil oil is Economical. But mobil oil is Not Rust/Corrosion resistant. To increase the Properties, Mix Mobil Oil (5w20) 40%, ATF 40%, Grease No.2 (Abro Rust/Oxidation Preventive) 20%.
Automatic Transmission Fluid is Rust/Corrosion Resistant, Anti Chipping properties, Carbon Remover and won't gum. You can have Excellent mixture by mixing; ATF (80%) and Grease (No.2, Rust & Corrosion Preventive, 20%). For Barrel cleaning, use only ATF, which have very good Carbon Removing properties.
Great video! I think you'd enjoy my content too. Keep up with the great work! 💛💕